/** ****************************************************************************** * @file stm320518_eval_lcd.h * @author MCD Application Team * @version V1.0.0 * @date 20-April-2012 * @brief This file contains all the functions prototypes for the stm320518_eval_lcd * firmware driver. ****************************************************************************** * @attention * *

© COPYRIGHT 2012 STMicroelectronics

* * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); * You may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.st.com/software_license_agreement_liberty_v2 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM320518_EVAL_LCD_H #define __STM320518_EVAL_LCD_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm320518_eval.h" #include "../Common/fonts.h" /** @addtogroup Utilities * @{ */ /** @addtogroup STM32_EVAL * @{ */ /** @addtogroup STM320518_EVAL * @{ */ /** @addtogroup STM320518_EVAL_LCD * @{ */ /** @defgroup STM320518_EVAL_LCD_Exported_Types * @{ */ typedef struct { int16_t X; int16_t Y; } Point, * pPoint; /** * @} */ /** @defgroup STM320518_EVAL_LCD_Exported_Constants * @{ */ /** * @brief Uncomment the line below if you want to use LCD_DrawBMP function to * display a bitmap picture on the LCD. This function assumes that the bitmap * file is loaded in the SPI Flash (mounted on STM320518-EVAL board), however * user can tailor it according to his application hardware requirement. */ /*#define USE_LCD_DrawBMP*/ /** * @brief Uncomment the line below if you want to use user defined Delay function * (for precise timing), otherwise default _delay_ function defined within * this driver is used (less precise timing). */ /* #define USE_Delay */ #ifdef USE_Delay #include "main.h" #define _delay_ Delay /* !< User can provide more timing precise _delay_ function (with 10ms time base), using SysTick for example */ #else #define _delay_ delay /* !< Default _delay_ function with less precise timing */ #endif /** * @brief LCD Control pins */ #define LCD_NCS_PIN GPIO_Pin_4 #define LCD_NCS_GPIO_PORT GPIOF #define LCD_NCS_GPIO_CLK RCC_AHBPeriph_GPIOF #define LCD_NWR_PIN GPIO_Pin_15 #define LCD_NWR_GPIO_PORT GPIOD #define LCD_NWR_GPIO_CLK RCC_AHBPeriph_GPIOD #define LCD_RS_PIN GPIO_Pin_7 #define LCD_RS_GPIO_PORT GPIOD #define LCD_RS_GPIO_CLK RCC_AHBPeriph_GPIOD /** * @brief LCD SPI Interface pins */ #define LCD_SPI_SCK_PIN GPIO_Pin_5 /* PA.05 */ #define LCD_SPI_SCK_GPIO_PORT GPIOA /* GPIOA */ #define LCD_SPI_SCK_GPIO_CLK RCC_AHBPeriph_GPIOA #define LCD_SPI_SCK_SOURCE GPIO_PinSource15 #define LCD_SPI_SCK_AF GPIO_AF_0 #if defined (STM320518_EVAL_REVA) #define LCD_SPI_MISO_PIN GPIO_Pin_6 /* PA.06 */ #define LCD_SPI_MISO_GPIO_PORT GPIOA /* GPIOA */ #define LCD_SPI_MISO_GPIO_CLK RCC_AHBPeriph_GPIOA #define LCD_SPI_MISO_SOURCE GPIO_PinSource6 #define LCD_SPI_MISO_AF GPIO_AF_0 #elif defined (STM320518_EVAL_REVB) #define LCD_SPI_MISO_PIN GPIO_Pin_4 /* PB.04 */ #define LCD_SPI_MISO_GPIO_PORT GPIOB /* GPIOB */ #define LCD_SPI_MISO_GPIO_CLK RCC_AHBPeriph_GPIOB #define LCD_SPI_MISO_SOURCE GPIO_PinSource4 #define LCD_SPI_MISO_AF GPIO_AF_0 #endif /* STM320518_EVAL_REVA*/ #define LCD_SPI_MOSI_PIN GPIO_Pin_7 /* PA.07 */ #define LCD_SPI_MOSI_GPIO_PORT GPIOA /* GPIOA */ #define LCD_SPI_MOSI_GPIO_CLK RCC_AHBPeriph_GPIOA #define LCD_SPI_MOSI_SOURCE GPIO_PinSource7 #define LCD_SPI_MOSI_AF GPIO_AF_0 #define LCD_SPI SPI1 #define LCD_SPI_CLK RCC_APB2Periph_SPI1 /** * @brief LCD Registers */ #define LCD_REG_0 0x00 #define LCD_REG_1 0x01 #define LCD_REG_2 0x02 #define LCD_REG_3 0x03 #define LCD_REG_4 0x04 #define LCD_REG_5 0x05 #define LCD_REG_6 0x06 #define LCD_REG_7 0x07 #define LCD_REG_8 0x08 #define LCD_REG_9 0x09 #define LCD_REG_10 0x0A #define LCD_REG_12 0x0C #define LCD_REG_13 0x0D #define LCD_REG_14 0x0E #define LCD_REG_15 0x0F #define LCD_REG_16 0x10 #define LCD_REG_17 0x11 #define LCD_REG_18 0x12 #define LCD_REG_19 0x13 #define LCD_REG_20 0x14 #define LCD_REG_21 0x15 #define LCD_REG_22 0x16 #define LCD_REG_23 0x17 #define LCD_REG_24 0x18 #define LCD_REG_25 0x19 #define LCD_REG_26 0x1A #define LCD_REG_27 0x1B #define LCD_REG_28 0x1C #define LCD_REG_29 0x1D #define LCD_REG_30 0x1E #define LCD_REG_31 0x1F #define LCD_REG_32 0x20 #define LCD_REG_33 0x21 #define LCD_REG_34 0x22 #define LCD_REG_35 0x23 #define LCD_REG_36 0x24 #define LCD_REG_37 0x25 #define LCD_REG_39 0x27 #define LCD_REG_40 0x28 #define LCD_REG_41 0x29 #define LCD_REG_43 0x2B #define LCD_REG_45 0x2D #define LCD_REG_48 0x30 #define LCD_REG_49 0x31 #define LCD_REG_50 0x32 #define LCD_REG_51 0x33 #define LCD_REG_52 0x34 #define LCD_REG_53 0x35 #define LCD_REG_54 0x36 #define LCD_REG_55 0x37 #define LCD_REG_56 0x38 #define LCD_REG_57 0x39 #define LCD_REG_59 0x3B #define LCD_REG_60 0x3C #define LCD_REG_61 0x3D #define LCD_REG_62 0x3E #define LCD_REG_63 0x3F #define LCD_REG_64 0x40 #define LCD_REG_65 0x41 #define LCD_REG_66 0x42 #define LCD_REG_67 0x43 #define LCD_REG_68 0x44 #define LCD_REG_69 0x45 #define LCD_REG_70 0x46 #define LCD_REG_71 0x47 #define LCD_REG_72 0x48 #define LCD_REG_73 0x49 #define LCD_REG_74 0x4A #define LCD_REG_75 0x4B #define LCD_REG_76 0x4C #define LCD_REG_77 0x4D #define LCD_REG_78 0x4E #define LCD_REG_79 0x4F #define LCD_REG_80 0x50 #define LCD_REG_81 0x51 #define LCD_REG_82 0x52 #define LCD_REG_83 0x53 #define LCD_REG_84 0x54 #define LCD_REG_85 0x55 #define LCD_REG_86 0x56 #define LCD_REG_87 0x57 #define LCD_REG_88 0x58 #define LCD_REG_89 0x59 #define LCD_REG_90 0x5A #define LCD_REG_91 0x5B #define LCD_REG_92 0x5C #define LCD_REG_93 0x5D #define LCD_REG_96 0x60 #define LCD_REG_97 0x61 #define LCD_REG_106 0x6A #define LCD_REG_118 0x76 #define LCD_REG_128 0x80 #define LCD_REG_129 0x81 #define LCD_REG_130 0x82 #define LCD_REG_131 0x83 #define LCD_REG_132 0x84 #define LCD_REG_133 0x85 #define LCD_REG_134 0x86 #define LCD_REG_135 0x87 #define LCD_REG_136 0x88 #define LCD_REG_137 0x89 #define LCD_REG_139 0x8B #define LCD_REG_140 0x8C #define LCD_REG_141 0x8D #define LCD_REG_143 0x8F #define LCD_REG_144 0x90 #define LCD_REG_145 0x91 #define LCD_REG_146 0x92 #define LCD_REG_147 0x93 #define LCD_REG_148 0x94 #define LCD_REG_149 0x95 #define LCD_REG_150 0x96 #define LCD_REG_151 0x97 #define LCD_REG_152 0x98 #define LCD_REG_153 0x99 #define LCD_REG_154 0x9A #define LCD_REG_157 0x9D #define LCD_REG_192 0xC0 #define LCD_REG_193 0xC1 #define LCD_REG_227 0xE3 #define LCD_REG_229 0xE5 #define LCD_REG_231 0xE7 #define LCD_REG_239 0xEF #define LCD_REG_232 0xE8 #define LCD_REG_233 0xE9 #define LCD_REG_234 0xEA #define LCD_REG_235 0xEB #define LCD_REG_236 0xEC #define LCD_REG_237 0xED #define LCD_REG_241 0xF1 #define LCD_REG_242 0xF2 /** * @brief LCD color */ #define LCD_COLOR_WHITE 0xFFFF #define LCD_COLOR_BLACK 0x0000 #define LCD_COLOR_GREY 0xF7DE #define LCD_COLOR_BLUE 0x001F #define LCD_COLOR_BLUE2 0x051F #define LCD_COLOR_RED 0xF800 #define LCD_COLOR_MAGENTA 0xF81F #define LCD_COLOR_GREEN 0x07E0 #define LCD_COLOR_CYAN 0x7FFF #define LCD_COLOR_YELLOW 0xFFE0 /** * @brief LCD Lines depending on the chosen fonts. */ #define LCD_LINE_0 LINE(0) #define LCD_LINE_1 LINE(1) #define LCD_LINE_2 LINE(2) #define LCD_LINE_3 LINE(3) #define LCD_LINE_4 LINE(4) #define LCD_LINE_5 LINE(5) #define LCD_LINE_6 LINE(6) #define LCD_LINE_7 LINE(7) #define LCD_LINE_8 LINE(8) #define LCD_LINE_9 LINE(9) #define LCD_LINE_10 LINE(10) #define LCD_LINE_11 LINE(11) #define LCD_LINE_12 LINE(12) #define LCD_LINE_13 LINE(13) #define LCD_LINE_14 LINE(14) #define LCD_LINE_15 LINE(15) #define LCD_LINE_16 LINE(16) #define LCD_LINE_17 LINE(17) #define LCD_LINE_18 LINE(18) #define LCD_LINE_19 LINE(19) #define LCD_LINE_20 LINE(20) #define LCD_LINE_21 LINE(21) #define LCD_LINE_22 LINE(22) #define LCD_LINE_23 LINE(23) #define LCD_LINE_24 LINE(24) #define LCD_LINE_25 LINE(25) #define LCD_LINE_26 LINE(26) #define LCD_LINE_27 LINE(27) #define LCD_LINE_28 LINE(28) #define LCD_LINE_29 LINE(29) /** * @brief LCD default font */ #define LCD_DEFAULT_FONT Font16x24 /** * @brief LCD Direction */ #define LCD_DIR_HORIZONTAL 0x0000 #define LCD_DIR_VERTICAL 0x0001 /** * @brief LCD Size (Width and Height) */ #define LCD_PIXEL_WIDTH 0x0140 #define LCD_PIXEL_HEIGHT 0x00F0 /** * @} */ /** @defgroup STM320518_EVAL_LCD_Exported_Macros * @{ */ #define ASSEMBLE_RGB(R, G, B) ((((R)& 0xF8) << 8) | (((G) & 0xFC) << 3) | (((B) & 0xF8) >> 3)) /** * @} */ /** @defgroup STM320518_EVAL_LCD_Exported_Functions * @{ */ void LCD_DeInit(void); void LCD_Setup(void); void STM320518_LCD_Init(void); void LCD_SetColors(__IO uint16_t _TextColor, __IO uint16_t _BackColor); void LCD_GetColors(__IO uint16_t *_TextColor, __IO uint16_t *_BackColor); void LCD_SetTextColor(__IO uint16_t Color); void LCD_SetBackColor(__IO uint16_t Color); void LCD_ClearLine(uint16_t Line); void LCD_Clear(uint16_t Color); void LCD_SetCursor(uint16_t Xpos, uint16_t Ypos); void LCD_DrawChar(uint16_t Xpos, uint16_t Ypos, const uint16_t *c); void LCD_DisplayChar(uint16_t Line, uint16_t Column, uint8_t Ascii); void LCD_SetFont(sFONT *fonts); sFONT *LCD_GetFont(void); void LCD_DisplayStringLine(uint16_t Line, uint8_t *ptr); void LCD_SetDisplayWindow(uint16_t Xpos, uint16_t Ypos, uint8_t Height, uint16_t Width); void LCD_WindowModeDisable(void); void LCD_DrawLine(uint16_t Xpos, uint16_t Ypos, uint16_t Length, uint8_t Direction); void LCD_DrawRect(uint16_t Xpos, uint16_t Ypos, uint8_t Height, uint16_t Width); void LCD_DrawCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius); void LCD_DrawMonoPict(const uint32_t *Pict); void LCD_DrawBMP(uint32_t BmpAddress); void LCD_DrawUniLine(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2); void LCD_DrawFullRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height); void LCD_DrawFullCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius); void LCD_PolyLine(pPoint Points, uint16_t PointCount); void LCD_PolyLineRelative(pPoint Points, uint16_t PointCount); void LCD_ClosedPolyLine(pPoint Points, uint16_t PointCount); void LCD_ClosedPolyLineRelative(pPoint Points, uint16_t PointCount); void LCD_FillPolyLine(pPoint Points, uint16_t PointCount); void LCD_nCS_StartByte(uint8_t Start_Byte); void LCD_WriteRegIndex(uint8_t LCD_Reg); void LCD_WriteReg(uint8_t LCD_Reg, uint16_t LCD_RegValue); void LCD_WriteRAM_Prepare(void); void LCD_WriteRAMWord(uint16_t RGB_Code); uint16_t LCD_ReadReg(uint8_t LCD_Reg); void LCD_WriteRAM(uint16_t RGB_Code); void LCD_PowerOn(void); void LCD_DisplayOn(void); void LCD_DisplayOff(void); void LCD_CtrlLinesConfig(void); void LCD_CtrlLinesWrite(GPIO_TypeDef* GPIOx, uint16_t CtrlPins, BitAction BitVal); void LCD_SPIConfig(void); /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM320518_EVAL_LCD_H */ /** * @} */ /** * @} */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/