The abstract base class for all data representing objects in a plot. More...

Inheritance diagram for QCPAbstractPlottable:

Public Functions
	QCPAbstractPlottable (QCPAxis keyAxis, QCPAxis valueAxis)

QString	name () const

bool	antialiasedFill () const

bool	antialiasedScatters () const

bool	antialiasedErrorBars () const

QPen	pen () const

QPen	selectedPen () const

QBrush	brush () const

QBrush	selectedBrush () const

QCPAxis *	keyAxis () const

QCPAxis *	valueAxis () const

bool	selectable () const

bool	selected () const

void	setName (const QString &name)

void	setAntialiasedFill (bool enabled)

void	setAntialiasedScatters (bool enabled)

void	setAntialiasedErrorBars (bool enabled)

void	setPen (const QPen &pen)

void	setSelectedPen (const QPen &pen)

void	setBrush (const QBrush &brush)

void	setSelectedBrush (const QBrush &brush)

void	setKeyAxis (QCPAxis *axis)

void	setValueAxis (QCPAxis *axis)

Q_SLOT void	setSelectable (bool selectable)

Q_SLOT void	setSelected (bool selected)

virtual void	clearData ()=0

virtual double	selectTest (const QPointF &pos, bool onlySelectable, QVariant *details=0) const =0

virtual bool	addToLegend ()

virtual bool	removeFromLegend () const

void	rescaleAxes (bool onlyEnlarge=false) const

void	rescaleKeyAxis (bool onlyEnlarge=false) const

void	rescaleValueAxis (bool onlyEnlarge=false) const

Public Functions inherited from QCPLayerable
	QCPLayerable (QCustomPlot plot, QString targetLayer=QString(), QCPLayerable parentLayerable=0)

bool	visible () const

QCustomPlot *	parentPlot () const

QCPLayerable *	parentLayerable () const

QCPLayer *	layer () const

bool	antialiased () const

void	setVisible (bool on)

Q_SLOT bool	setLayer (QCPLayer *layer)

bool	setLayer (const QString &layerName)

void	setAntialiased (bool enabled)

bool	realVisibility () const

Signals
void	selectionChanged (bool selected)

void	selectableChanged (bool selectable)

Signals inherited from QCPLayerable
void	layerChanged (QCPLayer *newLayer)

Protected Types
enum	SignDomain

Protected Functions
virtual QRect	clipRect () const

virtual void	draw (QCPPainter *painter)=0

virtual QCP::Interaction	selectionCategory () const

void	applyDefaultAntialiasingHint (QCPPainter *painter) const

virtual void	selectEvent (QMouseEvent event, bool additive, const QVariant &details, bool selectionStateChanged)

virtual void	deselectEvent (bool *selectionStateChanged)

virtual void	drawLegendIcon (QCPPainter *painter, const QRectF &rect) const =0

virtual QCPRange	getKeyRange (bool &foundRange, SignDomain inSignDomain=sdBoth) const =0

virtual QCPRange	getValueRange (bool &foundRange, SignDomain inSignDomain=sdBoth) const =0

void	coordsToPixels (double key, double value, double &x, double &y) const

const QPointF	coordsToPixels (double key, double value) const

void	pixelsToCoords (double x, double y, double &key, double &value) const

void	pixelsToCoords (const QPointF &pixelPos, double &key, double &value) const

QPen	mainPen () const

QBrush	mainBrush () const

void	applyFillAntialiasingHint (QCPPainter *painter) const

void	applyScattersAntialiasingHint (QCPPainter *painter) const

void	applyErrorBarsAntialiasingHint (QCPPainter *painter) const

double	distSqrToLine (const QPointF &start, const QPointF &end, const QPointF &point) const

Protected Functions inherited from QCPLayerable
virtual void	parentPlotInitialized (QCustomPlot *parentPlot)

void	initializeParentPlot (QCustomPlot *parentPlot)

void	setParentLayerable (QCPLayerable *parentLayerable)

bool	moveToLayer (QCPLayer *layer, bool prepend)

void	applyAntialiasingHint (QCPPainter *painter, bool localAntialiased, QCP::AntialiasedElement overrideElement) const

Detailed Description

The abstract base class for all data representing objects in a plot.

It defines a very basic interface like name, pen, brush, visibility etc. Since this class is abstract, it can't be instantiated. Use one of the subclasses or create a subclass yourself to create new ways of displaying data (see "Creating own plottables" below).

All further specifics are in the subclasses, for example:

A normal graph with possibly a line, scatter points and error bars: QCPGraph (typically created with QCustomPlot::addGraph)
A parametric curve: QCPCurve
A bar chart: QCPBars
A statistical box plot: QCPStatisticalBox
A color encoded two-dimensional map: QCPColorMap
An OHLC/Candlestick chart: QCPFinancial

Creating own plottables

To create an own plottable, you implement a subclass of QCPAbstractPlottable. These are the pure virtual functions, you must implement:

See the documentation of those functions for what they need to do.

For drawing your plot, you can use the coordsToPixels functions to translate a point in plot coordinates to pixel coordinates. This function is quite convenient, because it takes the orientation of the key and value axes into account for you (x and y are swapped when the key axis is vertical and the value axis horizontal). If you are worried about performance (i.e. you need to translate many points in a loop like QCPGraph), you can directly use QCPAxis::coordToPixel. However, you must then take care about the orientation of the axis yourself.

Here are some important members you inherit from QCPAbstractPlottable:

QCustomPlot *mParentPlot	A pointer to the parent QCustomPlot instance. The parent plot is inferred from the axes that are passed in the constructor.
QString mName	The name of the plottable.
QPen mPen	The generic pen of the plottable. You should use this pen for the most prominent data representing lines in the plottable (e.g QCPGraph uses this pen for its graph lines and scatters)
QPen mSelectedPen	The generic pen that should be used when the plottable is selected (hint: mainPen gives you the right pen, depending on selection state).
QBrush mBrush	The generic brush of the plottable. You should use this brush for the most prominent fillable structures in the plottable (e.g. QCPGraph uses this brush to control filling under the graph)
QBrush mSelectedBrush	The generic brush that should be used when the plottable is selected (hint: mainBrush gives you the right brush, depending on selection state).
QPointer<QCPAxis>mKeyAxis, mValueAxis	The key and value axes this plottable is attached to. Call their QCPAxis::coordToPixel functions to translate coordinates to pixels in either the key or value dimension. Make sure to check whether the pointer is null before using it. If one of the axes is null, don't draw the plottable.
bool mSelected	indicates whether the plottable is selected or not.

Member Enumeration Documentation

enum QCPAbstractPlottable::SignDomain

protected

Represents negative and positive sign domain for passing to getKeyRange and getValueRange.

Enumerator
sdNegative	The negative sign domain, i.e. numbers smaller than zero.
sdBoth	Both sign domains, including zero, i.e. all (rational) numbers.
sdPositive	The positive sign domain, i.e. numbers greater than zero.

Constructor & Destructor Documentation

QCPAbstractPlottable::QCPAbstractPlottable	(	QCPAxis *	keyAxis,
		QCPAxis *	valueAxis
	)

Constructs an abstract plottable which uses keyAxis as its key axis ("x") and valueAxis as its value axis ("y"). keyAxis and valueAxis must reside in the same QCustomPlot instance and have perpendicular orientations. If either of these restrictions is violated, a corresponding message is printed to the debug output (qDebug), the construction is not aborted, though.

Since QCPAbstractPlottable is an abstract class that defines the basic interface to plottables, it can't be directly instantiated.

You probably want one of the subclasses like QCPGraph or QCPCurve instead.

Member Function Documentation

void QCPAbstractPlottable::setName ( const QString & name )

The name is the textual representation of this plottable as it is displayed in the legend (QCPLegend). It may contain any UTF-8 characters, including newlines.

void QCPAbstractPlottable::setAntialiasedFill ( bool enabled )

Sets whether fills of this plottable are drawn antialiased or not.

Note that this setting may be overridden by QCustomPlot::setAntialiasedElements and QCustomPlot::setNotAntialiasedElements.

void QCPAbstractPlottable::setAntialiasedScatters ( bool enabled )

Sets whether the scatter symbols of this plottable are drawn antialiased or not.

Note that this setting may be overridden by QCustomPlot::setAntialiasedElements and QCustomPlot::setNotAntialiasedElements.

void QCPAbstractPlottable::setAntialiasedErrorBars ( bool enabled )

Sets whether the error bars of this plottable are drawn antialiased or not.

Note that this setting may be overridden by QCustomPlot::setAntialiasedElements and QCustomPlot::setNotAntialiasedElements.

void QCPAbstractPlottable::setPen ( const QPen & pen )

The pen is used to draw basic lines that make up the plottable representation in the plot.

For example, the QCPGraph subclass draws its graph lines with this pen.

See Also: setBrush

void QCPAbstractPlottable::setSelectedPen ( const QPen & pen )

When the plottable is selected, this pen is used to draw basic lines instead of the normal pen set via setPen.

See Also: setSelected, setSelectable, setSelectedBrush, selectTest

void QCPAbstractPlottable::setBrush ( const QBrush & brush )

The brush is used to draw basic fills of the plottable representation in the plot. The Fill can be a color, gradient or texture, see the usage of QBrush.

For example, the QCPGraph subclass draws the fill under the graph with this brush, when it's not set to Qt::NoBrush.

See Also: setPen

void QCPAbstractPlottable::setSelectedBrush ( const QBrush & brush )

When the plottable is selected, this brush is used to draw fills instead of the normal brush set via setBrush.

See Also: setSelected, setSelectable, setSelectedPen, selectTest

void QCPAbstractPlottable::setKeyAxis ( QCPAxis * axis )

The key axis of a plottable can be set to any axis of a QCustomPlot, as long as it is orthogonal to the plottable's value axis. This function performs no checks to make sure this is the case. The typical mathematical choice is to use the x-axis (QCustomPlot::xAxis) as key axis and the y-axis (QCustomPlot::yAxis) as value axis.

Normally, the key and value axes are set in the constructor of the plottable (or QCustomPlot::addGraph when working with QCPGraphs through the dedicated graph interface).

See Also: setValueAxis

void QCPAbstractPlottable::setValueAxis ( QCPAxis * axis )

The value axis of a plottable can be set to any axis of a QCustomPlot, as long as it is orthogonal to the plottable's key axis. This function performs no checks to make sure this is the case. The typical mathematical choice is to use the x-axis (QCustomPlot::xAxis) as key axis and the y-axis (QCustomPlot::yAxis) as value axis.

Normally, the key and value axes are set in the constructor of the plottable (or QCustomPlot::addGraph when working with QCPGraphs through the dedicated graph interface).

See Also: setKeyAxis

void QCPAbstractPlottable::setSelectable ( bool selectable )

Sets whether the user can (de-)select this plottable by clicking on the QCustomPlot surface. (When QCustomPlot::setInteractions contains iSelectPlottables.)

However, even when selectable was set to false, it is possible to set the selection manually, by calling setSelected directly.

See Also: setSelected

void QCPAbstractPlottable::setSelected ( bool selected )

Sets whether this plottable is selected or not. When selected, it uses a different pen and brush to draw its lines and fills, see setSelectedPen and setSelectedBrush.

The entire selection mechanism for plottables is handled automatically when QCustomPlot::setInteractions contains iSelectPlottables. You only need to call this function when you wish to change the selection state manually.

This function can change the selection state even when setSelectable was set to false.

emits the selectionChanged signal when selected is different from the previous selection state.

See Also: setSelectable, selectTest

void QCPAbstractPlottable::clearData ( )

pure virtual

Clears all data in the plottable.

Implemented in QCPBars, QCPGraph, QCPColorMap, QCPFinancial, QCPCurve, and QCPStatisticalBox.

virtual double QCPAbstractPlottable::selectTest	(	const QPointF &	pos,
		bool	onlySelectable,
		QVariant *	details = `0`
	)		const

pure virtual

This function is used to decide whether a click hits a layerable object or not.

pos is a point in pixel coordinates on the QCustomPlot surface. This function returns the shortest pixel distance of this point to the object. If the object is either invisible or the distance couldn't be determined, -1.0 is returned. Further, if onlySelectable is true and the object is not selectable, -1.0 is returned, too.

If the object is represented not by single lines but by an area like a QCPItemText or the bars of a QCPBars plottable, a click inside the area should also be considered a hit. In these cases this function thus returns a constant value greater zero but still below the parent plot's selection tolerance. (typically the selectionTolerance multiplied by 0.99).

Providing a constant value for area objects allows selecting line objects even when they are obscured by such area objects, by clicking close to the lines (i.e. closer than 0.99*selectionTolerance).

The actual setting of the selection state is not done by this function. This is handled by the parent QCustomPlot when the mouseReleaseEvent occurs, and the finally selected object is notified via the selectEvent/deselectEvent methods.

details is an optional output parameter. Every layerable subclass may place any information in details. This information will be passed to selectEvent when the parent QCustomPlot decides on the basis of this selectTest call, that the object was successfully selected. The subsequent call to selectEvent will carry the details. This is useful for multi-part objects (like QCPAxis). This way, a possibly complex calculation to decide which part was clicked is only done once in selectTest. The result (i.e. the actually clicked part) can then be placed in details. So in the subsequent selectEvent, the decision which part was selected doesn't have to be done a second time for a single selection operation.

You may pass 0 as details to indicate that you are not interested in those selection details.

See Also: selectEvent, deselectEvent, QCustomPlot::setInteractions

Reimplemented from QCPLayerable.

Implemented in QCPBars, QCPGraph, QCPColorMap, QCPFinancial, QCPCurve, and QCPStatisticalBox.

bool QCPAbstractPlottable::addToLegend ( )

virtual

Adds this plottable to the legend of the parent QCustomPlot (QCustomPlot::legend).

Normally, a QCPPlottableLegendItem is created and inserted into the legend. If the plottable needs a more specialized representation in the legend, this function will take this into account and instead create the specialized subclass of QCPAbstractLegendItem.

Returns true on success, i.e. when the legend exists and a legend item associated with this plottable isn't already in the legend.

See Also: removeFromLegend, QCPLegend::addItem

bool QCPAbstractPlottable::removeFromLegend ( ) const

virtual

Removes the plottable from the legend of the parent QCustomPlot. This means the QCPAbstractLegendItem (usually a QCPPlottableLegendItem) that is associated with this plottable is removed.

Returns true on success, i.e. if the legend exists and a legend item associated with this plottable was found and removed.

See Also: addToLegend, QCPLegend::removeItem

void QCPAbstractPlottable::rescaleAxes ( bool onlyEnlarge = false ) const

Rescales the key and value axes associated with this plottable to contain all displayed data, so the whole plottable is visible. If the scaling of an axis is logarithmic, rescaleAxes will make sure not to rescale to an illegal range i.e. a range containing different signs and/or zero. Instead it will stay in the current sign domain and ignore all parts of the plottable that lie outside of that domain.

onlyEnlarge makes sure the ranges are only expanded, never reduced. So it's possible to show multiple plottables in their entirety by multiple calls to rescaleAxes where the first call has onlyEnlarge set to false (the default), and all subsequent set to true.

See Also: rescaleKeyAxis, rescaleValueAxis, QCustomPlot::rescaleAxes, QCPAxis::rescale

void QCPAbstractPlottable::rescaleKeyAxis ( bool onlyEnlarge = false ) const

Rescales the key axis of the plottable so the whole plottable is visible.

See rescaleAxes for detailed behaviour.

void QCPAbstractPlottable::rescaleValueAxis ( bool onlyEnlarge = false ) const

Rescales the value axis of the plottable so the whole plottable is visible.

Returns true if the axis was actually scaled. This might not be the case if this plottable has an invalid range, e.g. because it has no data points.

See rescaleAxes for detailed behaviour.

void QCPAbstractPlottable::selectionChanged ( bool selected )

signal

This signal is emitted when the selection state of this plottable has changed, either by user interaction or by a direct call to setSelected.

void QCPAbstractPlottable::selectableChanged ( bool selectable )

signal

This signal is emitted when the selectability of this plottable has changed.

See Also: setSelectable

QRect QCPAbstractPlottable::clipRect ( ) const

protectedvirtual

Returns the clipping rectangle of this layerable object. By default, this is the viewport of the parent QCustomPlot. Specific subclasses may reimplement this function to provide different clipping rects.

The returned clipping rect is set on the painter before the draw function of the respective object is called.

Reimplemented from QCPLayerable.

virtual void QCPAbstractPlottable::draw ( QCPPainter * painter )

protectedpure virtual

This function draws the layerable with the specified painter. It is only called by QCustomPlot, if the layerable is visible (setVisible).

Before this function is called, the painter's antialiasing state is set via applyDefaultAntialiasingHint, see the documentation there. Further, the clipping rectangle was set to clipRect.

Implements QCPLayerable.

Implemented in QCPBars, QCPGraph, QCPColorMap, QCPFinancial, QCPCurve, and QCPStatisticalBox.

QCP::Interaction QCPAbstractPlottable::selectionCategory ( ) const

protectedvirtual

Returns the selection category this layerable shall belong to. The selection category is used in conjunction with QCustomPlot::setInteractions to control which objects are selectable and which aren't.

Subclasses that don't fit any of the normal QCP::Interaction values can use QCP::iSelectOther. This is what the default implementation returns.

See Also: QCustomPlot::setInteractions

Reimplemented from QCPLayerable.

void QCPAbstractPlottable::applyDefaultAntialiasingHint ( QCPPainter * painter ) const

protectedvirtual

A convenience function to easily set the QPainter::Antialiased hint on the provided painter before drawing plottable lines.

This is the antialiasing state the painter passed to the draw method is in by default.

This function takes into account the local setting of the antialiasing flag as well as the overrides set with QCustomPlot::setAntialiasedElements and QCustomPlot::setNotAntialiasedElements.

See Also: setAntialiased, applyFillAntialiasingHint, applyScattersAntialiasingHint, applyErrorBarsAntialiasingHint

Implements QCPLayerable.

void QCPAbstractPlottable::selectEvent	(	QMouseEvent *	event,
		bool	additive,
		const QVariant &	details,
		bool *	selectionStateChanged
	)

protectedvirtual

This event is called when the layerable shall be selected, as a consequence of a click by the user. Subclasses should react to it by setting their selection state appropriately. The default implementation does nothing.

event is the mouse event that caused the selection. additive indicates, whether the user was holding the multi-select-modifier while performing the selection (see QCustomPlot::setMultiSelectModifier). if additive is true, the selection state must be toggled (i.e. become selected when unselected and unselected when selected).

Every selectEvent is preceded by a call to selectTest, which has returned positively (i.e. returned a value greater than 0 and less than the selection tolerance of the parent QCustomPlot). The details data you output from selectTest is fed back via details here. You may use it to transport any kind of information from the selectTest to the possibly subsequent selectEvent. Usually details is used to transfer which part was clicked, if it is a layerable that has multiple individually selectable parts (like QCPAxis). This way selectEvent doesn't need to do the calculation again to find out which part was actually clicked.

selectionStateChanged is an output parameter. If the pointer is non-null, this function must set the value either to true or false, depending on whether the selection state of this layerable was actually changed. For layerables that only are selectable as a whole and not in parts, this is simple: if additive is true, selectionStateChanged must also be set to true, because the selection toggles. If additive is false, selectionStateChanged is only set to true, if the layerable was previously unselected and now is switched to the selected state.

See Also: selectTest, deselectEvent

Reimplemented from QCPLayerable.

void QCPAbstractPlottable::deselectEvent ( bool * selectionStateChanged )

protectedvirtual

This event is called when the layerable shall be deselected, either as consequence of a user interaction or a call to QCustomPlot::deselectAll. Subclasses should react to it by unsetting their selection appropriately.

just as in selectEvent, the output parameter selectionStateChanged (if non-null), must return true or false when the selection state of this layerable has changed or not changed, respectively.

See Also: selectTest, selectEvent

Reimplemented from QCPLayerable.

void QCPAbstractPlottable::drawLegendIcon	(	QCPPainter *	painter,
		const QRectF &	rect
	)		const

protectedpure virtual

called by QCPLegend::draw (via QCPPlottableLegendItem::draw) to create a graphical representation of this plottable inside rect, next to the plottable name.

The passed painter has its cliprect set to rect, so painting outside of rect won't appear outside the legend icon border.

Implemented in QCPBars, QCPGraph, QCPColorMap, QCPFinancial, QCPCurve, and QCPStatisticalBox.

QCPRange QCPAbstractPlottable::getKeyRange	(	bool &	foundRange,
		SignDomain	inSignDomain = `sdBoth`
	)		const

protectedpure virtual

called by rescaleAxes functions to get the full data key bounds. For logarithmic plots, one can set inSignDomain to either sdNegative or sdPositive in order to restrict the returned range to that sign domain. E.g. when only negative range is wanted, set inSignDomain to sdNegative and all positive points will be ignored for range calculation. For no restriction, just set inSignDomain to sdBoth (default). foundRange is an output parameter that indicates whether a range could be found or not. If this is false, you shouldn't use the returned range (e.g. no points in data).

Note that foundRange is not the same as QCPRange::validRange, since the range returned by this function may have size zero, which wouldn't count as a valid range.

See Also: rescaleAxes, getValueRange

Implemented in QCPBars, QCPGraph, QCPColorMap, QCPFinancial, QCPCurve, and QCPStatisticalBox.

QCPRange QCPAbstractPlottable::getValueRange	(	bool &	foundRange,
		SignDomain	inSignDomain = `sdBoth`
	)		const

protectedpure virtual

called by rescaleAxes functions to get the full data value bounds. For logarithmic plots, one can set inSignDomain to either sdNegative or sdPositive in order to restrict the returned range to that sign domain. E.g. when only negative range is wanted, set inSignDomain to sdNegative and all positive points will be ignored for range calculation. For no restriction, just set inSignDomain to sdBoth (default). foundRange is an output parameter that indicates whether a range could be found or not. If this is false, you shouldn't use the returned range (e.g. no points in data).

Note that foundRange is not the same as QCPRange::validRange, since the range returned by this function may have size zero, which wouldn't count as a valid range.

See Also: rescaleAxes, getKeyRange

Implemented in QCPBars, QCPGraph, QCPColorMap, QCPFinancial, QCPCurve, and QCPStatisticalBox.

void QCPAbstractPlottable::coordsToPixels	(	double	key,
		double	value,
		double &	x,
		double &	y
	)		const

protected

Convenience function for transforming a key/value pair to pixels on the QCustomPlot surface, taking the orientations of the axes associated with this plottable into account (e.g. whether key represents x or y).

key and value are transformed to the coodinates in pixels and are written to x and y.

See Also: pixelsToCoords, QCPAxis::coordToPixel

const QPointF QCPAbstractPlottable::coordsToPixels	(	double	key,
		double	value
	)		const

protected

This is an overloaded function.

Returns the input as pixel coordinates in a QPointF.

void QCPAbstractPlottable::pixelsToCoords	(	double	x,
		double	y,
		double &	key,
		double &	value
	)		const

protected

Convenience function for transforming a x/y pixel pair on the QCustomPlot surface to plot coordinates, taking the orientations of the axes associated with this plottable into account (e.g. whether key represents x or y).

x and y are transformed to the plot coodinates and are written to key and value.

See Also: coordsToPixels, QCPAxis::coordToPixel

void QCPAbstractPlottable::pixelsToCoords	(	const QPointF &	pixelPos,
		double &	key,
		double &	value
	)		const

protected

This is an overloaded function.

Returns the pixel input pixelPos as plot coordinates key and value.

QPen QCPAbstractPlottable::mainPen ( ) const

protected

Returns the pen that should be used for drawing lines of the plottable. Returns mPen when the graph is not selected and mSelectedPen when it is.

QBrush QCPAbstractPlottable::mainBrush ( ) const

protected

Returns the brush that should be used for drawing fills of the plottable. Returns mBrush when the graph is not selected and mSelectedBrush when it is.

void QCPAbstractPlottable::applyFillAntialiasingHint ( QCPPainter * painter ) const

protected

A convenience function to easily set the QPainter::Antialiased hint on the provided painter before drawing plottable fills.

This function takes into account the local setting of the antialiasing flag as well as the overrides set with QCustomPlot::setAntialiasedElements and QCustomPlot::setNotAntialiasedElements.

See Also: setAntialiased, applyDefaultAntialiasingHint, applyScattersAntialiasingHint, applyErrorBarsAntialiasingHint

void QCPAbstractPlottable::applyScattersAntialiasingHint ( QCPPainter * painter ) const

protected

A convenience function to easily set the QPainter::Antialiased hint on the provided painter before drawing plottable scatter points.

This function takes into account the local setting of the antialiasing flag as well as the overrides set with QCustomPlot::setAntialiasedElements and QCustomPlot::setNotAntialiasedElements.

See Also: setAntialiased, applyFillAntialiasingHint, applyDefaultAntialiasingHint, applyErrorBarsAntialiasingHint

void QCPAbstractPlottable::applyErrorBarsAntialiasingHint ( QCPPainter * painter ) const

protected

A convenience function to easily set the QPainter::Antialiased hint on the provided painter before drawing plottable error bars.

This function takes into account the local setting of the antialiasing flag as well as the overrides set with QCustomPlot::setAntialiasedElements and QCustomPlot::setNotAntialiasedElements.

See Also: setAntialiased, applyFillAntialiasingHint, applyScattersAntialiasingHint, applyDefaultAntialiasingHint

double QCPAbstractPlottable::distSqrToLine	(	const QPointF &	start,
		const QPointF &	end,
		const QPointF &	point
	)		const

protected

Finds the shortest squared distance of point to the line segment defined by start and end.

This function may be used to help with the implementation of the selectTest function for specific plottables.

Note: This function is identical to QCPAbstractItem::distSqrToLine

The documentation for this class was generated from the following files:

src/plottable.h
src/plottable.cpp

Public Functions

Signals

Protected Types

Protected Functions

Detailed Description

Creating own plottables

Member Enumeration Documentation

Constructor & Destructor Documentation

Member Function Documentation