/* Entry Point */
ENTRY( Reset_Handler )

/* Highest address of the user mode stack */
_estack = 0x20002000; /* end o f 8K RAM */

/* Generate a link error if heap and stack don’t fit int o RAM */
_Min_Heap_Size = 0; /* required amount of heap */
_Min_Stack_Size = 0x200; /* required amount of stack */

MEMORY
{
  sram (rwx) : ORIGIN = 0x20000000, LENGTH = 8K
  flash (rx) : ORIGIN = 0x08000000, LENGTH = 64K
}
SECTIONS
{
	.  = 0x08000000;         /* From 0x08000000 */

	/* for Cortex devices, the beginning of the startup code is stored in the .isr_vector section, which goes to FLASH */ 
	.isr_vector : 
	{ 
		. = ALIGN(4); 
		KEEP(*(.isr_vector))            /* Startup code */ 
		. = ALIGN(4); 
	} >flash
  
	.text : 
	{
		. = ALIGN(4); 
        	*(.text)      /* Program code */
		*(.text.*)
        	*(.rodata)    /* Read only data */
		*(.rodata.*)
		*(.glue_7)
		*(.glue_7t)

		. = ALIGN(4); 
		_etext = .; 
		/* This is used by the startup in order to initialize the .data secion */ 
		_sidata = _etext; 
	} >flash

	.  = 0x20000000;  /* From 0x20000000 */      
	.data : AT (_sidata)
	{
		. = ALIGN(4); 
		_sdata = . ;

		*(.data)      /* Data memory */
		*(.data.*)

		. = ALIGN(4);
		_edata = . ; 
	} >sram

	.bss :
	{
		. = ALIGN(4); 

		_sbss = . ; 
		*(.bss)       /* Zero-filled run time allocate data memory */
		*(COMMON)

		_ebss = . ; 
	} >sram

	PROVIDE ( end = _ebss ); 
	PROVIDE ( _end = _ebss );


	/* This is the user stack section 
	This is just to check that there is enough RAM left for the User mode stack 
	It should generate an error if it's full. 
	*/
	._usrstack : 
	{
		. = ALIGN(4); 
        	_susrstack = . ; 
        
        	. = . + _Min_Stack_Size ; 
        
		. = ALIGN(4); 
		_eusrstack = . ; 
	} > sram
}