/**
******************************************************************************
* @file stm32f0xx_pwr.h
* @author MCD Application Team
* @version V1.5.0
* @date 05-December-2014
* @brief This file contains all the functions prototypes for the PWR firmware
* library.
******************************************************************************
* @attention
*
*
© COPYRIGHT 2014 STMicroelectronics
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0XX_PWR_H
#define __STM32F0XX_PWR_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"
/** @addtogroup STM32F0xx_StdPeriph_Driver
* @{
*/
/** @addtogroup PWR
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWR_Exported_Constants
* @{
*/
/** @defgroup PWR_PVD_detection_level
* @brief This parameters are only applicable for STM32F051 and STM32F072 devices
* @{
*/
#define PWR_PVDLevel_0 PWR_CR_PLS_LEV0
#define PWR_PVDLevel_1 PWR_CR_PLS_LEV1
#define PWR_PVDLevel_2 PWR_CR_PLS_LEV2
#define PWR_PVDLevel_3 PWR_CR_PLS_LEV3
#define PWR_PVDLevel_4 PWR_CR_PLS_LEV4
#define PWR_PVDLevel_5 PWR_CR_PLS_LEV5
#define PWR_PVDLevel_6 PWR_CR_PLS_LEV6
#define PWR_PVDLevel_7 PWR_CR_PLS_LEV7
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_0) || ((LEVEL) == PWR_PVDLevel_1)|| \
((LEVEL) == PWR_PVDLevel_2) || ((LEVEL) == PWR_PVDLevel_3)|| \
((LEVEL) == PWR_PVDLevel_4) || ((LEVEL) == PWR_PVDLevel_5)|| \
((LEVEL) == PWR_PVDLevel_6) || ((LEVEL) == PWR_PVDLevel_7))
/**
* @}
*/
/** @defgroup PWR_WakeUp_Pins
* @{
*/
#define PWR_WakeUpPin_1 PWR_CSR_EWUP1
#define PWR_WakeUpPin_2 PWR_CSR_EWUP2
#define PWR_WakeUpPin_3 PWR_CSR_EWUP3 /*!< only applicable for STM32F072 devices */
#define PWR_WakeUpPin_4 PWR_CSR_EWUP4 /*!< only applicable for STM32F072 devices */
#define PWR_WakeUpPin_5 PWR_CSR_EWUP5 /*!< only applicable for STM32F072 devices */
#define PWR_WakeUpPin_6 PWR_CSR_EWUP6 /*!< only applicable for STM32F072 devices */
#define PWR_WakeUpPin_7 PWR_CSR_EWUP7 /*!< only applicable for STM32F072 devices */
#define PWR_WakeUpPin_8 PWR_CSR_EWUP8 /*!< only applicable for STM32F072 devices */
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WakeUpPin_1) || ((PIN) == PWR_WakeUpPin_2) || \
((PIN) == PWR_WakeUpPin_3) || ((PIN) == PWR_WakeUpPin_4) || \
((PIN) == PWR_WakeUpPin_5) || ((PIN) == PWR_WakeUpPin_6) || \
((PIN) == PWR_WakeUpPin_7) || ((PIN) == PWR_WakeUpPin_8))
/**
* @}
*/
/** @defgroup PWR_Regulator_state_is_Sleep_STOP_mode
* @{
*/
#define PWR_Regulator_ON ((uint32_t)0x00000000)
#define PWR_Regulator_LowPower PWR_CR_LPSDSR
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \
((REGULATOR) == PWR_Regulator_LowPower))
/**
* @}
*/
/** @defgroup PWR_SLEEP_mode_entry
* @{
*/
#define PWR_SLEEPEntry_WFI ((uint8_t)0x01)
#define PWR_SLEEPEntry_WFE ((uint8_t)0x02)
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPEntry_WFI) || ((ENTRY) == PWR_SLEEPEntry_WFE))
/**
* @}
*/
/** @defgroup PWR_STOP_mode_entry
* @{
*/
#define PWR_STOPEntry_WFI ((uint8_t)0x01)
#define PWR_STOPEntry_WFE ((uint8_t)0x02)
#define PWR_STOPEntry_SLEEPONEXIT ((uint8_t)0x03)
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE) ||\
((ENTRY) == PWR_STOPEntry_SLEEPONEXIT))
/**
* @}
*/
/** @defgroup PWR_Flag
* @{
*/
#define PWR_FLAG_WU PWR_CSR_WUF
#define PWR_FLAG_SB PWR_CSR_SBF
#define PWR_FLAG_PVDO PWR_CSR_PVDO /*!< Not applicable for STM32F030 devices */
#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_VREFINTRDY))
#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* Function used to set the PWR configuration to the default reset state ******/
void PWR_DeInit(void);
/* Backup Domain Access function **********************************************/
void PWR_BackupAccessCmd(FunctionalState NewState);
/* PVD configuration functions ************************************************/
void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel); /*!< only applicable for STM32F051 and STM32F072 devices */
void PWR_PVDCmd(FunctionalState NewState); /*!< only applicable for STM32F051 and STM32F072 devices */
/* WakeUp pins configuration functions ****************************************/
void PWR_WakeUpPinCmd(uint32_t PWR_WakeUpPin, FunctionalState NewState);
/* Low Power modes configuration functions ************************************/
void PWR_EnterSleepMode(uint8_t PWR_SLEEPEntry);
void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
void PWR_EnterSTANDBYMode(void);
/* Flags management functions *************************************************/
FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG);
void PWR_ClearFlag(uint32_t PWR_FLAG);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0XX_PWR_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/