Sine_logger/sine_sdio/liball/stm32f10x_fsmc.c

/**
  ******************************************************************************
  * @file    stm32f10x_fsmc.c
  * @author  MCD Application Team
  * @version V3.3.0
  * @date    04/16/2010
  * @brief   This file provides all the FSMC firmware functions.
  ******************************************************************************
  * @copy
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_fsmc.h"
#include "stm32f10x_rcc.h"

/** @addtogroup STM32F10x_StdPeriph_Driver
  * @{
  */

/** @defgroup FSMC 
  * @brief FSMC driver modules
  * @{
  */ 

/** @defgroup FSMC_Private_TypesDefinitions
  * @{
  */ 
/**
  * @}
  */

/** @defgroup FSMC_Private_Defines
  * @{
  */

/* --------------------- FSMC registers bit mask ---------------------------- */

/* FSMC BCRx Mask */
#define BCR_MBKEN_Set                       ((uint32_t)0x00000001)
#define BCR_MBKEN_Reset                     ((uint32_t)0x000FFFFE)
#define BCR_FACCEN_Set                      ((uint32_t)0x00000040)

/* FSMC PCRx Mask */
#define PCR_PBKEN_Set                       ((uint32_t)0x00000004)
#define PCR_PBKEN_Reset                     ((uint32_t)0x000FFFFB)
#define PCR_ECCEN_Set                       ((uint32_t)0x00000040)
#define PCR_ECCEN_Reset                     ((uint32_t)0x000FFFBF)
#define PCR_MemoryType_NAND                 ((uint32_t)0x00000008)
/**
  * @}
  */

/** @defgroup FSMC_Private_Macros
  * @{
  */

/**
  * @}
  */

/** @defgroup FSMC_Private_Variables
  * @{
  */

/**
  * @}
  */

/** @defgroup FSMC_Private_FunctionPrototypes
  * @{
  */

/**
  * @}
  */

/** @defgroup FSMC_Private_Functions
  * @{
  */

/**
  * @brief  Deinitializes the FSMC NOR/SRAM Banks registers to their default 
  *   reset values.
  * @param  FSMC_Bank: specifies the FSMC Bank to be used
  *   This parameter can be one of the following values:
  *     @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1  
  *     @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 
  *     @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 
  *     @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 
  * @retval None
  */
void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank)
{
  /* Check the parameter */
  assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank));
  
  /* FSMC_Bank1_NORSRAM1 */
  if(FSMC_Bank == FSMC_Bank1_NORSRAM1)
  {
    FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030DB;    
  }
  /* FSMC_Bank1_NORSRAM2,  FSMC_Bank1_NORSRAM3 or FSMC_Bank1_NORSRAM4 */
  else
  {   
    FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030D2; 
  }
  FSMC_Bank1->BTCR[FSMC_Bank + 1] = 0x0FFFFFFF;
  FSMC_Bank1E->BWTR[FSMC_Bank] = 0x0FFFFFFF;  
}

/**
  * @brief  Deinitializes the FSMC NAND Banks registers to their default reset values.
  * @param  FSMC_Bank: specifies the FSMC Bank to be used
  *   This parameter can be one of the following values:
  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND 
  * @retval None
  */
void FSMC_NANDDeInit(uint32_t FSMC_Bank)
{
  /* Check the parameter */
  assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
  
  if(FSMC_Bank == FSMC_Bank2_NAND)
  {
    /* Set the FSMC_Bank2 registers to their reset values */
    FSMC_Bank2->PCR2 = 0x00000018;
    FSMC_Bank2->SR2 = 0x00000040;
    FSMC_Bank2->PMEM2 = 0xFCFCFCFC;
    FSMC_Bank2->PATT2 = 0xFCFCFCFC;  
  }
  /* FSMC_Bank3_NAND */  
  else
  {
    /* Set the FSMC_Bank3 registers to their reset values */
    FSMC_Bank3->PCR3 = 0x00000018;
    FSMC_Bank3->SR3 = 0x00000040;
    FSMC_Bank3->PMEM3 = 0xFCFCFCFC;
    FSMC_Bank3->PATT3 = 0xFCFCFCFC; 
  }  
}

/**
  * @brief  Deinitializes the FSMC PCCARD Bank registers to their default reset values.
  * @param  None                       
  * @retval None
  */
void FSMC_PCCARDDeInit(void)
{
  /* Set the FSMC_Bank4 registers to their reset values */
  FSMC_Bank4->PCR4 = 0x00000018; 
  FSMC_Bank4->SR4 = 0x00000000;	
  FSMC_Bank4->PMEM4 = 0xFCFCFCFC;
  FSMC_Bank4->PATT4 = 0xFCFCFCFC;
  FSMC_Bank4->PIO4 = 0xFCFCFCFC;
}

/**
  * @brief  Initializes the FSMC NOR/SRAM Banks according to the specified
  *   parameters in the FSMC_NORSRAMInitStruct.
  * @param  FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef
  *   structure that contains the configuration information for 
  *   the FSMC NOR/SRAM specified Banks.                       
  * @retval None
  */
void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
{ 
  /* Check the parameters */
  assert_param(IS_FSMC_NORSRAM_BANK(FSMC_NORSRAMInitStruct->FSMC_Bank));
  assert_param(IS_FSMC_MUX(FSMC_NORSRAMInitStruct->FSMC_DataAddressMux));
  assert_param(IS_FSMC_MEMORY(FSMC_NORSRAMInitStruct->FSMC_MemoryType));
  assert_param(IS_FSMC_MEMORY_WIDTH(FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth));
  assert_param(IS_FSMC_BURSTMODE(FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode));
  assert_param(IS_FSMC_WAIT_POLARITY(FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity));
  assert_param(IS_FSMC_WRAP_MODE(FSMC_NORSRAMInitStruct->FSMC_WrapMode));
  assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive));
  assert_param(IS_FSMC_WRITE_OPERATION(FSMC_NORSRAMInitStruct->FSMC_WriteOperation));
  assert_param(IS_FSMC_WAITE_SIGNAL(FSMC_NORSRAMInitStruct->FSMC_WaitSignal));
  assert_param(IS_FSMC_EXTENDED_MODE(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode));
  assert_param(IS_FSMC_WRITE_BURST(FSMC_NORSRAMInitStruct->FSMC_WriteBurst));  
  assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime));
  assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime));
  assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime));
  assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration));
  assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision));
  assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency));
  assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode)); 
  
  /* Bank1 NOR/SRAM control register configuration */ 
  FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 
            (uint32_t)FSMC_NORSRAMInitStruct->FSMC_DataAddressMux |
            FSMC_NORSRAMInitStruct->FSMC_MemoryType |
            FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth |
            FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode |
            FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity |
            FSMC_NORSRAMInitStruct->FSMC_WrapMode |
            FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive |
            FSMC_NORSRAMInitStruct->FSMC_WriteOperation |
            FSMC_NORSRAMInitStruct->FSMC_WaitSignal |
            FSMC_NORSRAMInitStruct->FSMC_ExtendedMode |
            FSMC_NORSRAMInitStruct->FSMC_WriteBurst;
  if(FSMC_NORSRAMInitStruct->FSMC_MemoryType == FSMC_MemoryType_NOR)
  {
    FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] |= (uint32_t)BCR_FACCEN_Set;
  }
  /* Bank1 NOR/SRAM timing register configuration */
  FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank+1] = 
            (uint32_t)FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime |
            (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime << 4) |
            (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime << 8) |
            (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration << 16) |
            (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision << 20) |
            (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency << 24) |
             FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode;
            
    
  /* Bank1 NOR/SRAM timing register for write configuration, if extended mode is used */
  if(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode == FSMC_ExtendedMode_Enable)
  {
    assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime));
    assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime));
    assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime));
    assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision));
    assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency));
    assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode));
    FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 
              (uint32_t)FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime |
              (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime << 4 )|
              (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime << 8) |
              (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision << 20) |
              (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency << 24) |
               FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode;
  }
  else
  {
    FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 0x0FFFFFFF;
  }
}

/**
  * @brief  Initializes the FSMC NAND Banks according to the specified 
  *   parameters in the FSMC_NANDInitStruct.
  * @param  FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef 
  *   structure that contains the configuration information for the FSMC NAND specified Banks.                       
  * @retval None
  */
void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
{
  uint32_t tmppcr = 0x00000000, tmppmem = 0x00000000, tmppatt = 0x00000000; 
    
  /* Check the parameters */
  assert_param( IS_FSMC_NAND_BANK(FSMC_NANDInitStruct->FSMC_Bank));
  assert_param( IS_FSMC_WAIT_FEATURE(FSMC_NANDInitStruct->FSMC_Waitfeature));
  assert_param( IS_FSMC_MEMORY_WIDTH(FSMC_NANDInitStruct->FSMC_MemoryDataWidth));
  assert_param( IS_FSMC_ECC_STATE(FSMC_NANDInitStruct->FSMC_ECC));
  assert_param( IS_FSMC_ECCPAGE_SIZE(FSMC_NANDInitStruct->FSMC_ECCPageSize));
  assert_param( IS_FSMC_TCLR_TIME(FSMC_NANDInitStruct->FSMC_TCLRSetupTime));
  assert_param( IS_FSMC_TAR_TIME(FSMC_NANDInitStruct->FSMC_TARSetupTime));
  assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime));
  assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime));
  assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime));
  assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime));
  assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime));
  assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime));
  assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime));
  assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime));
  
  /* Set the tmppcr value according to FSMC_NANDInitStruct parameters */
  tmppcr = (uint32_t)FSMC_NANDInitStruct->FSMC_Waitfeature |
            PCR_MemoryType_NAND |
            FSMC_NANDInitStruct->FSMC_MemoryDataWidth |
            FSMC_NANDInitStruct->FSMC_ECC |
            FSMC_NANDInitStruct->FSMC_ECCPageSize |
            (FSMC_NANDInitStruct->FSMC_TCLRSetupTime << 9 )|
            (FSMC_NANDInitStruct->FSMC_TARSetupTime << 13);
            
  /* Set tmppmem value according to FSMC_CommonSpaceTimingStructure parameters */
  tmppmem = (uint32_t)FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime |
            (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
            (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
            (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); 
            
  /* Set tmppatt value according to FSMC_AttributeSpaceTimingStructure parameters */
  tmppatt = (uint32_t)FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime |
            (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
            (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
            (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24);
  
  if(FSMC_NANDInitStruct->FSMC_Bank == FSMC_Bank2_NAND)
  {
    /* FSMC_Bank2_NAND registers configuration */
    FSMC_Bank2->PCR2 = tmppcr;
    FSMC_Bank2->PMEM2 = tmppmem;
    FSMC_Bank2->PATT2 = tmppatt;
  }
  else
  {
    /* FSMC_Bank3_NAND registers configuration */
    FSMC_Bank3->PCR3 = tmppcr;
    FSMC_Bank3->PMEM3 = tmppmem;
    FSMC_Bank3->PATT3 = tmppatt;
  }
}

/**
  * @brief  Initializes the FSMC PCCARD Bank according to the specified 
  *   parameters in the FSMC_PCCARDInitStruct.
  * @param  FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef
  *   structure that contains the configuration information for the FSMC PCCARD Bank.                       
  * @retval None
  */
void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
{
  /* Check the parameters */
  assert_param(IS_FSMC_WAIT_FEATURE(FSMC_PCCARDInitStruct->FSMC_Waitfeature));
  assert_param(IS_FSMC_TCLR_TIME(FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime));
  assert_param(IS_FSMC_TAR_TIME(FSMC_PCCARDInitStruct->FSMC_TARSetupTime));
 
  assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime));
  assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime));
  assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime));
  assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime));
  
  assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime));
  assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime));
  assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime));
  assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime));
  assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime));
  assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime));
  assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime));
  assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime));
  
  /* Set the PCR4 register value according to FSMC_PCCARDInitStruct parameters */
  FSMC_Bank4->PCR4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_Waitfeature |
                     FSMC_MemoryDataWidth_16b |  
                     (FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime << 9) |
                     (FSMC_PCCARDInitStruct->FSMC_TARSetupTime << 13);
            
  /* Set PMEM4 register value according to FSMC_CommonSpaceTimingStructure parameters */
  FSMC_Bank4->PMEM4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime |
                      (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
                      (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
                      (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); 
            
  /* Set PATT4 register value according to FSMC_AttributeSpaceTimingStructure parameters */
  FSMC_Bank4->PATT4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime |
                      (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
                      (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
                      (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24);	
            
  /* Set PIO4 register value according to FSMC_IOSpaceTimingStructure parameters */
  FSMC_Bank4->PIO4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime |
                     (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
                     (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
                     (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime << 24);             
}

/**
  * @brief  Fills each FSMC_NORSRAMInitStruct member with its default value.
  * @param  FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef 
  *   structure which will be initialized.
  * @retval None
  */
void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
{  
  /* Reset NOR/SRAM Init structure parameters values */
  FSMC_NORSRAMInitStruct->FSMC_Bank = FSMC_Bank1_NORSRAM1;
  FSMC_NORSRAMInitStruct->FSMC_DataAddressMux = FSMC_DataAddressMux_Enable;
  FSMC_NORSRAMInitStruct->FSMC_MemoryType = FSMC_MemoryType_SRAM;
  FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b;
  FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
  FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
  FSMC_NORSRAMInitStruct->FSMC_WrapMode = FSMC_WrapMode_Disable;
  FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
  FSMC_NORSRAMInitStruct->FSMC_WriteOperation = FSMC_WriteOperation_Enable;
  FSMC_NORSRAMInitStruct->FSMC_WaitSignal = FSMC_WaitSignal_Enable;
  FSMC_NORSRAMInitStruct->FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
  FSMC_NORSRAMInitStruct->FSMC_WriteBurst = FSMC_WriteBurst_Disable;
  FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime = 0xF;
  FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime = 0xF;
  FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime = 0xFF;
  FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF;
  FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision = 0xF;
  FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency = 0xF;
  FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; 
  FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime = 0xF;
  FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime = 0xF;
  FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime = 0xFF;
  FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF;
  FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision = 0xF;
  FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency = 0xF;
  FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A;
}

/**
  * @brief  Fills each FSMC_NANDInitStruct member with its default value.
  * @param  FSMC_NANDInitStruct: pointer to a FSMC_NANDInitTypeDef 
  *   structure which will be initialized.
  * @retval None
  */
void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
{ 
  /* Reset NAND Init structure parameters values */
  FSMC_NANDInitStruct->FSMC_Bank = FSMC_Bank2_NAND;
  FSMC_NANDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable;
  FSMC_NANDInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b;
  FSMC_NANDInitStruct->FSMC_ECC = FSMC_ECC_Disable;
  FSMC_NANDInitStruct->FSMC_ECCPageSize = FSMC_ECCPageSize_256Bytes;
  FSMC_NANDInitStruct->FSMC_TCLRSetupTime = 0x0;
  FSMC_NANDInitStruct->FSMC_TARSetupTime = 0x0;
  FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC;
  FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
  FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
  FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
  FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC;
  FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
  FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
  FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;	  
}

/**
  * @brief  Fills each FSMC_PCCARDInitStruct member with its default value.
  * @param  FSMC_PCCARDInitStruct: pointer to a FSMC_PCCARDInitTypeDef 
  *   structure which will be initialized.
  * @retval None
  */
void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
{
  /* Reset PCCARD Init structure parameters values */
  FSMC_PCCARDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable;
  FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime = 0x0;
  FSMC_PCCARDInitStruct->FSMC_TARSetupTime = 0x0;
  FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC;
  FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
  FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
  FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
  FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC;
  FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
  FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
  FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;	
  FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime = 0xFC;
  FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
  FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
  FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
}

/**
  * @brief  Enables or disables the specified NOR/SRAM Memory Bank.
  * @param  FSMC_Bank: specifies the FSMC Bank to be used
  *   This parameter can be one of the following values:
  *     @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1  
  *     @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 
  *     @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 
  *     @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 
  * @param  NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState)
{
  assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  
  if (NewState != DISABLE)
  {
    /* Enable the selected NOR/SRAM Bank by setting the PBKEN bit in the BCRx register */
    FSMC_Bank1->BTCR[FSMC_Bank] |= BCR_MBKEN_Set;
  }
  else
  {
    /* Disable the selected NOR/SRAM Bank by clearing the PBKEN bit in the BCRx register */
    FSMC_Bank1->BTCR[FSMC_Bank] &= BCR_MBKEN_Reset;
  }
}

/**
  * @brief  Enables or disables the specified NAND Memory Bank.
  * @param  FSMC_Bank: specifies the FSMC Bank to be used
  *   This parameter can be one of the following values:
  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
  * @param  NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState)
{
  assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  
  if (NewState != DISABLE)
  {
    /* Enable the selected NAND Bank by setting the PBKEN bit in the PCRx register */
    if(FSMC_Bank == FSMC_Bank2_NAND)
    {
      FSMC_Bank2->PCR2 |= PCR_PBKEN_Set;
    }
    else
    {
      FSMC_Bank3->PCR3 |= PCR_PBKEN_Set;
    }
  }
  else
  {
    /* Disable the selected NAND Bank by clearing the PBKEN bit in the PCRx register */
    if(FSMC_Bank == FSMC_Bank2_NAND)
    {
      FSMC_Bank2->PCR2 &= PCR_PBKEN_Reset;
    }
    else
    {
      FSMC_Bank3->PCR3 &= PCR_PBKEN_Reset;
    }
  }
}

/**
  * @brief  Enables or disables the PCCARD Memory Bank.
  * @param  NewState: new state of the PCCARD Memory Bank.  
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void FSMC_PCCARDCmd(FunctionalState NewState)
{
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  
  if (NewState != DISABLE)
  {
    /* Enable the PCCARD Bank by setting the PBKEN bit in the PCR4 register */
    FSMC_Bank4->PCR4 |= PCR_PBKEN_Set;
  }
  else
  {
    /* Disable the PCCARD Bank by clearing the PBKEN bit in the PCR4 register */
    FSMC_Bank4->PCR4 &= PCR_PBKEN_Reset;
  }
}

/**
  * @brief  Enables or disables the FSMC NAND ECC feature.
  * @param  FSMC_Bank: specifies the FSMC Bank to be used
  *   This parameter can be one of the following values:
  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
  * @param  NewState: new state of the FSMC NAND ECC feature.  
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState)
{
  assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  
  if (NewState != DISABLE)
  {
    /* Enable the selected NAND Bank ECC function by setting the ECCEN bit in the PCRx register */
    if(FSMC_Bank == FSMC_Bank2_NAND)
    {
      FSMC_Bank2->PCR2 |= PCR_ECCEN_Set;
    }
    else
    {
      FSMC_Bank3->PCR3 |= PCR_ECCEN_Set;
    }
  }
  else
  {
    /* Disable the selected NAND Bank ECC function by clearing the ECCEN bit in the PCRx register */
    if(FSMC_Bank == FSMC_Bank2_NAND)
    {
      FSMC_Bank2->PCR2 &= PCR_ECCEN_Reset;
    }
    else
    {
      FSMC_Bank3->PCR3 &= PCR_ECCEN_Reset;
    }
  }
}

/**
  * @brief  Returns the error correction code register value.
  * @param  FSMC_Bank: specifies the FSMC Bank to be used
  *   This parameter can be one of the following values:
  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
  * @retval The Error Correction Code (ECC) value.
  */
uint32_t FSMC_GetECC(uint32_t FSMC_Bank)
{
  uint32_t eccval = 0x00000000;
  
  if(FSMC_Bank == FSMC_Bank2_NAND)
  {
    /* Get the ECCR2 register value */
    eccval = FSMC_Bank2->ECCR2;
  }
  else
  {
    /* Get the ECCR3 register value */
    eccval = FSMC_Bank3->ECCR3;
  }
  /* Return the error correction code value */
  return(eccval);
}

/**
  * @brief  Enables or disables the specified FSMC interrupts.
  * @param  FSMC_Bank: specifies the FSMC Bank to be used
  *   This parameter can be one of the following values:
  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
  *     @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
  * @param  FSMC_IT: specifies the FSMC interrupt sources to be enabled or disabled.
  *   This parameter can be any combination of the following values:
  *     @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. 
  *     @arg FSMC_IT_Level: Level edge detection interrupt.
  *     @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
  * @param  NewState: new state of the specified FSMC interrupts.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState)
{
  assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
  assert_param(IS_FSMC_IT(FSMC_IT));	
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  
  if (NewState != DISABLE)
  {
    /* Enable the selected FSMC_Bank2 interrupts */
    if(FSMC_Bank == FSMC_Bank2_NAND)
    {
      FSMC_Bank2->SR2 |= FSMC_IT;
    }
    /* Enable the selected FSMC_Bank3 interrupts */
    else if (FSMC_Bank == FSMC_Bank3_NAND)
    {
      FSMC_Bank3->SR3 |= FSMC_IT;
    }
    /* Enable the selected FSMC_Bank4 interrupts */
    else
    {
      FSMC_Bank4->SR4 |= FSMC_IT;    
    }
  }
  else
  {
    /* Disable the selected FSMC_Bank2 interrupts */
    if(FSMC_Bank == FSMC_Bank2_NAND)
    {
      
      FSMC_Bank2->SR2 &= (uint32_t)~FSMC_IT;
    }
    /* Disable the selected FSMC_Bank3 interrupts */
    else if (FSMC_Bank == FSMC_Bank3_NAND)
    {
      FSMC_Bank3->SR3 &= (uint32_t)~FSMC_IT;
    }
    /* Disable the selected FSMC_Bank4 interrupts */
    else
    {
      FSMC_Bank4->SR4 &= (uint32_t)~FSMC_IT;    
    }
  }
}

/**
  * @brief  Checks whether the specified FSMC flag is set or not.
  * @param  FSMC_Bank: specifies the FSMC Bank to be used
  *   This parameter can be one of the following values:
  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
  *     @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
  * @param  FSMC_FLAG: specifies the flag to check.
  *   This parameter can be one of the following values:
  *     @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag.
  *     @arg FSMC_FLAG_Level: Level detection Flag.
  *     @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag.
  *     @arg FSMC_FLAG_FEMPT: Fifo empty Flag. 
  * @retval The new state of FSMC_FLAG (SET or RESET).
  */
FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
{
  FlagStatus bitstatus = RESET;
  uint32_t tmpsr = 0x00000000;
  
  /* Check the parameters */
  assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank));
  assert_param(IS_FSMC_GET_FLAG(FSMC_FLAG));
  
  if(FSMC_Bank == FSMC_Bank2_NAND)
  {
    tmpsr = FSMC_Bank2->SR2;
  }  
  else if(FSMC_Bank == FSMC_Bank3_NAND)
  {
    tmpsr = FSMC_Bank3->SR3;
  }
  /* FSMC_Bank4_PCCARD*/
  else
  {
    tmpsr = FSMC_Bank4->SR4;
  } 
  
  /* Get the flag status */
  if ((tmpsr & FSMC_FLAG) != (uint16_t)RESET )
  {
    bitstatus = SET;
  }
  else
  {
    bitstatus = RESET;
  }
  /* Return the flag status */
  return bitstatus;
}

/**
  * @brief  Clears the FSMC’s pending flags.
  * @param  FSMC_Bank: specifies the FSMC Bank to be used
  *   This parameter can be one of the following values:
  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
  *     @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
  * @param  FSMC_FLAG: specifies the flag to clear.
  *   This parameter can be any combination of the following values:
  *     @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag.
  *     @arg FSMC_FLAG_Level: Level detection Flag.
  *     @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag.
  * @retval None
  */
void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
{
 /* Check the parameters */
  assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank));
  assert_param(IS_FSMC_CLEAR_FLAG(FSMC_FLAG)) ;
    
  if(FSMC_Bank == FSMC_Bank2_NAND)
  {
    FSMC_Bank2->SR2 &= ~FSMC_FLAG; 
  }  
  else if(FSMC_Bank == FSMC_Bank3_NAND)
  {
    FSMC_Bank3->SR3 &= ~FSMC_FLAG;
  }
  /* FSMC_Bank4_PCCARD*/
  else
  {
    FSMC_Bank4->SR4 &= ~FSMC_FLAG;
  }
}

/**
  * @brief  Checks whether the specified FSMC interrupt has occurred or not.
  * @param  FSMC_Bank: specifies the FSMC Bank to be used
  *   This parameter can be one of the following values:
  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
  *     @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
  * @param  FSMC_IT: specifies the FSMC interrupt source to check.
  *   This parameter can be one of the following values:
  *     @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. 
  *     @arg FSMC_IT_Level: Level edge detection interrupt.
  *     @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. 
  * @retval The new state of FSMC_IT (SET or RESET).
  */
ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT)
{
  ITStatus bitstatus = RESET;
  uint32_t tmpsr = 0x0, itstatus = 0x0, itenable = 0x0; 
  
  /* Check the parameters */
  assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
  assert_param(IS_FSMC_GET_IT(FSMC_IT));
  
  if(FSMC_Bank == FSMC_Bank2_NAND)
  {
    tmpsr = FSMC_Bank2->SR2;
  }  
  else if(FSMC_Bank == FSMC_Bank3_NAND)
  {
    tmpsr = FSMC_Bank3->SR3;
  }
  /* FSMC_Bank4_PCCARD*/
  else
  {
    tmpsr = FSMC_Bank4->SR4;
  } 
  
  itstatus = tmpsr & FSMC_IT;
  
  itenable = tmpsr & (FSMC_IT >> 3);
  if ((itstatus != (uint32_t)RESET)  && (itenable != (uint32_t)RESET))
  {
    bitstatus = SET;
  }
  else
  {
    bitstatus = RESET;
  }
  return bitstatus; 
}

/**
  * @brief  Clears the FSMC’s interrupt pending bits.
  * @param  FSMC_Bank: specifies the FSMC Bank to be used
  *   This parameter can be one of the following values:
  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
  *     @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
  * @param  FSMC_IT: specifies the interrupt pending bit to clear.
  *   This parameter can be any combination of the following values:
  *     @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. 
  *     @arg FSMC_IT_Level: Level edge detection interrupt.
  *     @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
  * @retval None
  */
void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT)
{
  /* Check the parameters */
  assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
  assert_param(IS_FSMC_IT(FSMC_IT));
    
  if(FSMC_Bank == FSMC_Bank2_NAND)
  {
    FSMC_Bank2->SR2 &= ~(FSMC_IT >> 3); 
  }  
  else if(FSMC_Bank == FSMC_Bank3_NAND)
  {
    FSMC_Bank3->SR3 &= ~(FSMC_IT >> 3);
  }
  /* FSMC_Bank4_PCCARD*/
  else
  {
    FSMC_Bank4->SR4 &= ~(FSMC_IT >> 3);
  }
}

/**
  * @}
  */ 

/**
  * @}
  */

/**
  * @}
  */

/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/