Alexander M Gladtsin 1e988f95a4 000001 лет назад: 8
..
build 1e988f95a4 000001 лет назад: 8
inc 1e988f95a4 000001 лет назад: 8
lib 1e988f95a4 000001 лет назад: 8
source 1e988f95a4 000001 лет назад: 8
Makefile 1e988f95a4 000001 лет назад: 8
main.c 1e988f95a4 000001 лет назад: 8
main.h 1e988f95a4 000001 лет назад: 8
readme.txt 1e988f95a4 000001 лет назад: 8
stm32_flash.ld 1e988f95a4 000001 лет назад: 8
stm32f10x_conf.h 1e988f95a4 000001 лет назад: 8
stm32f10x_it.c 1e988f95a4 000001 лет назад: 8
stm32f10x_it.h 1e988f95a4 000001 лет назад: 8
system_stm32f10x.c 1e988f95a4 000001 лет назад: 8

readme.txt

/**
@page SysTick_TimeBase SysTick Time Base example

@verbatim
******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
* @file SysTick/TimeBase/readme.txt
* @author MCD Application Team
* @version V3.5.0
* @date 08-April-2011
* @brief Description of the SysTick Time Base example.
******************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
******************************************************************************
@endverbatim

@par Example Description

This example shows how to configure the SysTick to generate a time base equal to
1 ms. The system clock is set to 24 MHz on Value line devices and to 72 MHz on
other devices, the SysTick is clocked by the AHB clock (HCLK).

A "Delay" function is implemented based on the SysTick end-of-count event.
Four LEDs are toggled with a timing defined by the Delay function.

@par Directory contents

- SysTick/TimeBase/stm32f10x_conf.h Library Configuration file
- SysTick/TimeBase/stm32f10x_it.c Interrupt handlers
- SysTick/TimeBase/stm32f10x_it.h Header for stm32f10x_it.c
- SysTick/TimeBase/main.c Main program
- SysTick/TimeBase/main.h Header for main.c
- SysTick/TimeBase/system_stm32f10x.c STM32F10x system source file

@par Hardware and Software environment

- This example runs on STM32F10x Connectivity line, High-Density, High-Density
Value line, Medium-Density, XL-Density, Medium-Density Value line,
Low-Density and Low-Density Value line Devices.

- This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density
Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL
(Connectivity line), STM3210E-EVAL (High-Density and XL-Density)
and STM3210B-EVAL (Medium-Density) evaluation boards and can be easily
tailored to any other supported device and development board.
To select the STMicroelectronics evaluation board used to run the example,
uncomment the corresponding line in stm32_eval.h file (under Utilities\STM32_EVAL)

- STM32100E-EVAL Set-up
- Use LED1, LED2, LED3 and LED4 connected respectively to PF.06, PF0.7, PF.08
and PF.09 pins

- STM32100B-EVAL Set-up
- Use LED1, LED2, LED3 and LED4 connected respectively to PC.06, PC.07, PC.08
and PC.09 pins

- STM3210C-EVAL Set-up
- Use LED1, LED2, LED3 and LED4 connected respectively to PD.07, PD.13, PF.03
and PD.04 pins

- STM3210E-EVAL Set-up
- Use LED1, LED2, LED3 and LED4 connected respectively to PF.06, PF0.7, PF.08
and PF.09 pins

- STM3210B-EVAL Set-up
- Use LED1, LED2, LED3 and LED4 connected respectively to PC.06, PC.07, PC.08
and PC.09 pins


@par How to use it ?

In order to make the program work, you must do the following :
- Copy all source files from this example folder to the template folder under
Project\STM32F10x_StdPeriph_Template
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Run the example

@note
- Low-density Value line devices are STM32F100xx microcontrollers where the
Flash memory density ranges between 16 and 32 Kbytes.
- Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx
microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
- Medium-density Value line devices are STM32F100xx microcontrollers where
the Flash memory density ranges between 64 and 128 Kbytes.
- Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx
microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
- High-density Value line devices are STM32F100xx microcontrollers where
the Flash memory density ranges between 256 and 512 Kbytes.
- High-density devices are STM32F101xx and STM32F103xx microcontrollers where
the Flash memory density ranges between 256 and 512 Kbytes.
- XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
the Flash memory density ranges between 512 and 1024 Kbytes.
- Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.

*

© COPYRIGHT 2011 STMicroelectronics


*/