One m

gentoo/sys-cluster/torque/torque-6.0.1.ebuild

@@ -3,7 +3,7 @@
 
 EAPI=5
 
-inherit flag-o-matic eutils linux-info
+inherit flag-o-matic eutils linux-info versionator
 
 DESCRIPTION="Resource manager and queuing system based on OpenPBS"
 HOMEPAGE="http://www.adaptivecomputing.com/products/open-source/torque"
@@ -164,6 +164,9 @@ pkg_postinst() {
 	elog "    If this is the first time torque has been installed, then you are not"
 	elog "ready to start the server.  Please refer to the documentation located at:"
 	elog "http://docs.adaptivecomputing.com/torque/${PN//./-}/Content/topics/1-installConfig/initializeConfigOnServer.htm"
+
+
+	# if [[ -z "${REPLACING_VERSIONS}" ]] || [[ "$(get_major_version ${REPLACING_VERSIONS})"  -lt 4 ]]; then
 	if [[ -z "${REPLACING_VERSIONS}" ]] || [[ $(echo "${REPLACING_VERSIONS%.*} < 4.0" | bc)  -eq  1 ]]; then
 		echo
 		elog "Important 4.0+ updates"
@@ -172,4 +175,20 @@ pkg_postinst() {
 		elog "  - pbs_iff has been replaced by trqauthd, you will now need to add"
 		elog "    trqauthd to your default runlevel."
 	fi
+
+	local v
+#	for v in ${REPLACING_VERSIONS}; do
+#            if  version_is_at_least 4.0 ${v}; then
+#        	echo
+#                elog "Important 4.0+ updates"
+#                elog "  - The on-wire protocol version has been changed."
+#                elog "    Versions of Torque before 4.0.0 are no longer able to communicate."
+#                elog "  - pbs_iff has been replaced by trqauthd, you will now need to add"
+#                elog "    trqauthd to your default runlevel."        
+#		break
+#            fi
+#        done
+
+
+
 }

gentoo/sys-cluster/torque/torque-6.0.1.ebuild.old

@@ -1,175 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit flag-o-matic eutils linux-info
-
-DESCRIPTION="Resource manager and queuing system based on OpenPBS"
-HOMEPAGE="http://www.adaptivecomputing.com/products/open-source/torque"
-# TODO:  hopefully moving to github tags soon
-# http://www.supercluster.org/pipermail/torquedev/2013-May/004519.html
-SRC_URI="http://www.adaptivecomputing.com/index.php?wpfb_dl=3032 -> ${P}.tar.gz"
-
-LICENSE="torque-2.5"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~hppa ~ia64 ~mips ~ppc ~ppc64 ~sparc ~x86"
-IUSE="cgroups cpusets +crypt doc drmaa kernel_linux libressl munge nvidia server +syslog tk"
-
-DEPEND_COMMON="
-	sys-libs/zlib
-	sys-libs/readline:0=
-	dev-libs/libxml2
-	!libressl? ( dev-libs/openssl:0= )
-	libressl? ( dev-libs/libressl:0= )
-	cpusets? ( sys-apps/hwloc )
-	munge? ( sys-auth/munge )
-	nvidia? ( >=x11-drivers/nvidia-drivers-275 )
-	tk? (
-		dev-lang/tk:0=
-		dev-lang/tcl:0=
-	)
-	syslog? ( virtual/logger )
-	!!games-util/qstat"
-
-# libncurses.so is only needed for configure check on readline
-DEPEND="${DEPEND_COMMON}
-	sys-libs/ncurses:*
-	!!sys-cluster/slurm"
-
-RDEPEND="${DEPEND_COMMON}
-	crypt? ( net-misc/openssh )
-	!crypt? ( net-misc/netkit-rsh )
-	!dev-libs/uthash"
-
-# Torque should depend on dev-libs/uthash but that's pretty much impossible
-# to patch in as they ship with a broken configure such that files referenced
-# by the configure.ac and Makefile.am are missing.
-# http://www.supercluster.org/pipermail/torquedev/2014-October/004773.html
-
-S="${WORKDIR}"/${P}-1456945733_daea91b
-
-pkg_setup() {
-	PBS_SERVER_HOME="${PBS_SERVER_HOME:-/var/spool/${PN}}"
-
-	# Find a Torque server to use.  Check environment, then
-	# current setup (if any), and fall back on current hostname.
-	if [ -z "${PBS_SERVER_NAME}" ]; then
-		if [ -f "${ROOT}${PBS_SERVER_HOME}/server_name" ]; then
-			PBS_SERVER_NAME="$(<${ROOT}${PBS_SERVER_HOME}/server_name)"
-		else
-			PBS_SERVER_NAME=$(hostname -f)
-		fi
-	fi
-
-	if use cpusets || use cgroups; then
-		if ! use kernel_linux; then
-			einfo
-			elog "    Torque currently only has support for cpusets and cgroups in linux."
-			elog "Assuming you didn't really want this USE flag and ignoring its state."
-			einfo
-		else
-			linux-info_pkg_setup
-			if ! linux_config_exists || ! linux_chkconfig_present CPUSETS; then
-				einfo
-				elog "    Torque support for cpusets will require that you recompile"
-				elog "your kernel with CONFIG_CPUSETS enabled."
-				einfo
-			fi
-		fi
-	fi
-}
-
-src_prepare() {
-	# We install to a valid location, no need to muck with ld.so.conf
-	# --without-loadlibfile is supposed to do this for us...
-	sed -i '/mk_default_ld_lib_file || return 1/d' buildutils/pbs_mkdirs.in || die
-}
-
-src_configure() {
-	econf \
-		$(use_enable tk gui) \
-		$(use_enable tk tcl-qstat) \
-		$(use_enable syslog) \
-		$(use_enable server) \
-		$(use_enable drmaa) \
-		$(use_enable munge munge-auth) \
-		$(use_enable nvidia nvidia-gpus) \
-		$(usex crypt --with-rcp --with-rcp scp mom_rcp) \
-		$(usex kernel_linux $(use_enable cpusets cpuset) --disable-cpuset) \
-		$(usex kernel_linux $(use_enable cgroups) --disable-cgroups) \
-		--with-server-home=${PBS_SERVER_HOME} \
-		--with-environ=/etc/pbs_environment \
-		--with-default-server=${PBS_SERVER_NAME} \
-		--disable-gcc-warnings \
-		--disable-silent-rules \
-		--with-tcp-retry-limit=2 \
-		--without-loadlibfile
-}
-
-src_install() {
-	local dir
-
-	DOCS=( CHANGELOG README.* Release_Notes )
-	use doc && DOCS+=( doc/admin_guide.ps doc/*.pdf )
-
-	default
-
-	# The build script isn't alternative install location friendly,
-	# So we have to fix some hard-coded paths in tclIndex for xpbs* to work
-	for file in $(find "${ED}" -iname tclIndex); do
-		sed \
-			-e "s/${ED//\// }/ /" \
-			-i "${file}" || die
-	done
-
-	for dir in $(find "${ED}/${PBS_SERVER_HOME}" -type d); do
-		keepdir "${dir#${ED}}"
-	done
-
-	if use server; then
-		newinitd "${FILESDIR}"/pbs_server-init.d-munge pbs_server
-		newinitd "${FILESDIR}"/pbs_sched-init.d pbs_sched
-	fi
-	newinitd "${FILESDIR}"/pbs_mom-init.d-munge pbs_mom
-	newconfd "${FILESDIR}"/${PN}-conf.d-munge ${PN}
-	newinitd "${FILESDIR}"/trqauthd-init.d trqauthd
-	newenvd "${FILESDIR}"/${PN}-env.d 25${PN}
-}
-
-pkg_preinst() {
-	if [[ -f "${ROOT}etc/pbs_environment" ]]; then
-		cp "${ROOT}etc/pbs_environment" "${ED}"/etc/pbs_environment || die
-	fi
-
-	if use server && [[ -f "${ROOT}${PBS_SERVER_HOME}/server_priv/nodes" ]]; then
-		cp \
-			"${EROOT}${PBS_SERVER_HOME}/server_priv/nodes" \
-			"${ED}/${PBS_SERVER_HOME}/server_priv/nodes" || die
-	fi
-
-	echo "${PBS_SERVER_NAME}" > "${ED}${PBS_SERVER_HOME}/server_name" || die
-
-	# Fix up the env.d file to use our set server home.
-	sed \
-		-e "s:/var/spool/${PN}:${PBS_SERVER_HOME}:g" \
-		-i "${ED}"/etc/env.d/25${PN} || die
-
-	if use munge; then
-		sed -i 's,\(PBS_USE_MUNGE=\).*,\11,' "${ED}"/etc/conf.d/${PN} || die
-	fi
-}
-
-pkg_postinst() {
-	elog "    If this is the first time torque has been installed, then you are not"
-	elog "ready to start the server.  Please refer to the documentation located at:"
-	elog "http://docs.adaptivecomputing.com/torque/${PN//./-}/Content/topics/1-installConfig/initializeConfigOnServer.htm"
-	if [[ -z "${REPLACING_VERSIONS}" ]] || [[ ${REPLACING_VERSIONS} < 4 ]]; then
-		echo
-		elog "Important 4.0+ updates"
-		elog "  - The on-wire protocol version has been changed."
-		elog "    Versions of Torque before 4.0.0 are no longer able to communicate."
-		elog "  - pbs_iff has been replaced by trqauthd, you will now need to add"
-		elog "    trqauthd to your default runlevel."
-	fi
-}