| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152 |
- --- htb.init.old 2005-03-15 14:56:08.328305288 +0200
- +++ htb.init 2005-03-15 15:05:16.612953352 +0200
- @@ -240,6 +240,10 @@
- # Maximum packet size HTB creates rate maps for. The default should
- # be sufficient for most cases, it certainly is for Ethernet.
- #
- +# TOS=<number> optional, default "none"
- +#
- +# TOS field
- +#
- ### SFQ qdisc parameters
- #
- # The SFQ queueing discipline is a cheap way to fairly share class bandwidth
- @@ -435,6 +435,7 @@
- HTB_CLASS="RATE\|CEIL\|BURST\|CBURST\|PRIO\|LEAF\|MTU"
- HTB_CLASS="$HTB_CLASS\|PRIO_RULE\|PRIO_MARK\|PRIO_REALM"
- HTB_CLASS="$HTB_CLASS\|LIMIT\|QUANTUM\|PERTURB"
- +HTB_CLASS="$HTB_CLASS\|TOS"
-
-
- #############################################################################
- @@ -646,7 +647,7 @@
- ### Set defaults & load class
- MTU=""; LEAF=none; PERTURB=10
- RATE=""; BURST=""; CEIL=""; CBURST=""
- - PRIO=""; LIMIT=""; QUANTUM=""
- + PRIO=""; LIMIT=""; QUANTUM=""; TOS=""
-
- PRIO_RULE=$PRIO_RULE_DEFAULT
- PRIO_MARK=$PRIO_MARK_DEFAULT
- @@ -868,12 +869,19 @@
- u32_d="${DPORT:+match ip dport $DPORT $DMASK}"
- u32_d="${DADDR:+match ip dst $DADDR} $u32_d"
-
- +
- + u32_tos=""
- + if [ -n "$TOS" ]; then
- + u32_tos="match ip tos $TOS 0xff"
- + fi
- +
- +
- ### Uncomment the following if you want to see parsed rules
- #echo "$rule: $u32_s $u32_d"
-
- ### Attach u32 filter to the appropriate class
- tc filter add dev $DEVICE parent 1:0 protocol ip \
- - prio $PRIO_RULE u32 $u32_s $u32_d classid 1:$CLASS
- + prio $PRIO_RULE u32 $u32_s $u32_d $u32_tos classid 1:$CLASS
- done ### rule
-
- [ "$1" = "compile" ] && echo
|
