dyokunev/nucleo-f091rc-rs232-enc28j60 - NRNU MEPhI git-based development collaboration service

Nessuna descrizione

8 Commit

1 Branches

0 Rilasci

Dmitry Yu Okunev 91fd32fb45 Updated photo in README.md		9 anni fa
Drivers	f49c6b6401 Trying to make RS232<->UDP bridge	9 anni fa
Inc	427533b7a3 Seems to works	9 anni fa
SW4STM32	427533b7a3 Seems to works	9 anni fa
Src	427533b7a3 Seems to works	9 anni fa
doc	6e68d30a04 Added photo of fully working device	9 anni fa
.gitignore	59031deea3 Initial commit	9 anni fa
.gitmodules	89b8febc67 Fixed .gitmodules	9 anni fa
.mxproject	59031deea3 Initial commit	9 anni fa
Makefile	7d14d23d01 It pings!	9 anni fa
README.md	91fd32fb45 Updated photo in README.md	9 anni fa
STM32F091RCTx_FLASH.ld	59031deea3 Initial commit	9 anni fa
nucleo-f091rc-rs232-enc28j60.ioc	427533b7a3 Seems to works	9 anni fa

The main repository: git clone https://devel.mephi.ru/dyokunev/nucleo-f091rc-rs232-enc28j60

This is a software for:

This's a UDP-based device to control servers over RS232. Components:

enc28j60 board;
(not tested, but required) MAX232 converter

If you have any questions — ask me.