Sine_logger/stm32f1_04/build/main.lst

build/main.elf:     file format elf32-littlearm


Disassembly of section .text:

0800010c <NVIC_SetPriority>:
 * interrupt, or negative to specify an internal (core) interrupt.
 *
 * Note: The priority cannot be set for every core interrupt.
 */
static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
 800010c:	b480      	push	{r7}
 800010e:	b083      	sub	sp, #12
 8000110:	af00      	add	r7, sp, #0
 8000112:	4603      	mov	r3, r0
 8000114:	6039      	str	r1, [r7, #0]
 8000116:	71fb      	strb	r3, [r7, #7]
  if(IRQn < 0) {
 8000118:	f997 3007 	ldrsb.w	r3, [r7, #7]
 800011c:	2b00      	cmp	r3, #0
 800011e:	da0b      	bge.n	8000138 <NVIC_SetPriority+0x2c>
    SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */
 8000120:	490d      	ldr	r1, [pc, #52]	; (8000158 <NVIC_SetPriority+0x4c>)
 8000122:	79fb      	ldrb	r3, [r7, #7]
 8000124:	f003 030f 	and.w	r3, r3, #15
 8000128:	3b04      	subs	r3, #4
 800012a:	683a      	ldr	r2, [r7, #0]
 800012c:	b2d2      	uxtb	r2, r2
 800012e:	0112      	lsls	r2, r2, #4
 8000130:	b2d2      	uxtb	r2, r2
 8000132:	440b      	add	r3, r1
 8000134:	761a      	strb	r2, [r3, #24]
  else {
    NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff);    }        /* set Priority for device specific Interrupts  */
}
 8000136:	e009      	b.n	800014c <NVIC_SetPriority+0x40>
static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
  if(IRQn < 0) {
    SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */
  else {
    NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff);    }        /* set Priority for device specific Interrupts  */
 8000138:	4908      	ldr	r1, [pc, #32]	; (800015c <NVIC_SetPriority+0x50>)
 800013a:	f997 3007 	ldrsb.w	r3, [r7, #7]
 800013e:	683a      	ldr	r2, [r7, #0]
 8000140:	b2d2      	uxtb	r2, r2
 8000142:	0112      	lsls	r2, r2, #4
 8000144:	b2d2      	uxtb	r2, r2
 8000146:	440b      	add	r3, r1
 8000148:	f883 2300 	strb.w	r2, [r3, #768]	; 0x300
}
 800014c:	bf00      	nop
 800014e:	370c      	adds	r7, #12
 8000150:	46bd      	mov	sp, r7
 8000152:	bc80      	pop	{r7}
 8000154:	4770      	bx	lr
 8000156:	bf00      	nop
 8000158:	e000ed00 	.word	0xe000ed00
 800015c:	e000e100 	.word	0xe000e100

08000160 <SysTick_Config>:
 * Initialise the system tick timer and its interrupt and start the
 * system tick timer / counter in free running mode to generate 
 * periodical interrupts.
 */
static __INLINE uint32_t SysTick_Config(uint32_t ticks)
{ 
 8000160:	b580      	push	{r7, lr}
 8000162:	b082      	sub	sp, #8
 8000164:	af00      	add	r7, sp, #0
 8000166:	6078      	str	r0, [r7, #4]
  if (ticks > SysTick_LOAD_RELOAD_Msk)  return (1);            /* Reload value impossible */
 8000168:	687b      	ldr	r3, [r7, #4]
 800016a:	f1b3 7f80 	cmp.w	r3, #16777216	; 0x1000000
 800016e:	d301      	bcc.n	8000174 <SysTick_Config+0x14>
 8000170:	2301      	movs	r3, #1
 8000172:	e011      	b.n	8000198 <SysTick_Config+0x38>
                                                               
  SysTick->LOAD  = (ticks & SysTick_LOAD_RELOAD_Msk) - 1;      /* set reload register */
 8000174:	4a0a      	ldr	r2, [pc, #40]	; (80001a0 <SysTick_Config+0x40>)
 8000176:	687b      	ldr	r3, [r7, #4]
 8000178:	f023 437f 	bic.w	r3, r3, #4278190080	; 0xff000000
 800017c:	3b01      	subs	r3, #1
 800017e:	6053      	str	r3, [r2, #4]
  NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1);  /* set Priority for Cortex-M0 System Interrupts */
 8000180:	210f      	movs	r1, #15
 8000182:	f04f 30ff 	mov.w	r0, #4294967295	; 0xffffffff
 8000186:	f7ff ffc1 	bl	800010c <NVIC_SetPriority>
  SysTick->VAL   = 0;                                          /* Load the SysTick Counter Value */
 800018a:	4b05      	ldr	r3, [pc, #20]	; (80001a0 <SysTick_Config+0x40>)
 800018c:	2200      	movs	r2, #0
 800018e:	609a      	str	r2, [r3, #8]
  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk | 
 8000190:	4b03      	ldr	r3, [pc, #12]	; (80001a0 <SysTick_Config+0x40>)
 8000192:	2207      	movs	r2, #7
 8000194:	601a      	str	r2, [r3, #0]
                   SysTick_CTRL_TICKINT_Msk   | 
                   SysTick_CTRL_ENABLE_Msk;                    /* Enable SysTick IRQ and SysTick Timer */
  return (0);                                                  /* Function successful */
 8000196:	2300      	movs	r3, #0
}
 8000198:	4618      	mov	r0, r3
 800019a:	3708      	adds	r7, #8
 800019c:	46bd      	mov	sp, r7
 800019e:	bd80      	pop	{r7, pc}
 80001a0:	e000e010 	.word	0xe000e010

080001a4 <SystemInit>:
  * @note   This function should be used only after reset.
  * @param  None
  * @retval None
  */
void SystemInit (void)
{
 80001a4:	b580      	push	{r7, lr}
 80001a6:	af00      	add	r7, sp, #0
  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
  /* Set HSION bit */
  RCC->CR |= (uint32_t)0x00000001;
 80001a8:	4a15      	ldr	r2, [pc, #84]	; (8000200 <SystemInit+0x5c>)
 80001aa:	4b15      	ldr	r3, [pc, #84]	; (8000200 <SystemInit+0x5c>)
 80001ac:	681b      	ldr	r3, [r3, #0]
 80001ae:	f043 0301 	orr.w	r3, r3, #1
 80001b2:	6013      	str	r3, [r2, #0]

  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
#ifndef STM32F10X_CL
  RCC->CFGR &= (uint32_t)0xF8FF0000;
 80001b4:	4912      	ldr	r1, [pc, #72]	; (8000200 <SystemInit+0x5c>)
 80001b6:	4b12      	ldr	r3, [pc, #72]	; (8000200 <SystemInit+0x5c>)
 80001b8:	685a      	ldr	r2, [r3, #4]
 80001ba:	4b12      	ldr	r3, [pc, #72]	; (8000204 <SystemInit+0x60>)
 80001bc:	4013      	ands	r3, r2
 80001be:	604b      	str	r3, [r1, #4]
#else
  RCC->CFGR &= (uint32_t)0xF0FF0000;
#endif /* STM32F10X_CL */   
  
  /* Reset HSEON, CSSON and PLLON bits */
  RCC->CR &= (uint32_t)0xFEF6FFFF;
 80001c0:	4a0f      	ldr	r2, [pc, #60]	; (8000200 <SystemInit+0x5c>)
 80001c2:	4b0f      	ldr	r3, [pc, #60]	; (8000200 <SystemInit+0x5c>)
 80001c4:	681b      	ldr	r3, [r3, #0]
 80001c6:	f023 7384 	bic.w	r3, r3, #17301504	; 0x1080000
 80001ca:	f423 3380 	bic.w	r3, r3, #65536	; 0x10000
 80001ce:	6013      	str	r3, [r2, #0]

  /* Reset HSEBYP bit */
  RCC->CR &= (uint32_t)0xFFFBFFFF;
 80001d0:	4a0b      	ldr	r2, [pc, #44]	; (8000200 <SystemInit+0x5c>)
 80001d2:	4b0b      	ldr	r3, [pc, #44]	; (8000200 <SystemInit+0x5c>)
 80001d4:	681b      	ldr	r3, [r3, #0]
 80001d6:	f423 2380 	bic.w	r3, r3, #262144	; 0x40000
 80001da:	6013      	str	r3, [r2, #0]

  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
  RCC->CFGR &= (uint32_t)0xFF80FFFF;
 80001dc:	4a08      	ldr	r2, [pc, #32]	; (8000200 <SystemInit+0x5c>)
 80001de:	4b08      	ldr	r3, [pc, #32]	; (8000200 <SystemInit+0x5c>)
 80001e0:	685b      	ldr	r3, [r3, #4]
 80001e2:	f423 03fe 	bic.w	r3, r3, #8323072	; 0x7f0000
 80001e6:	6053      	str	r3, [r2, #4]

  /* Reset CFGR2 register */
  RCC->CFGR2 = 0x00000000;      
#else
  /* Disable all interrupts and clear pending bits  */
  RCC->CIR = 0x009F0000;
 80001e8:	4b05      	ldr	r3, [pc, #20]	; (8000200 <SystemInit+0x5c>)
 80001ea:	f44f 021f 	mov.w	r2, #10420224	; 0x9f0000
 80001ee:	609a      	str	r2, [r3, #8]
  #endif /* DATA_IN_ExtSRAM */
#endif 

  /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
  /* Configure the Flash Latency cycles and enable prefetch buffer */
  SetSysClock();
 80001f0:	f000 f878 	bl	80002e4 <SetSysClock>

#ifdef VECT_TAB_SRAM
  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
#else
  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
 80001f4:	4b04      	ldr	r3, [pc, #16]	; (8000208 <SystemInit+0x64>)
 80001f6:	f04f 6200 	mov.w	r2, #134217728	; 0x8000000
 80001fa:	609a      	str	r2, [r3, #8]
#endif 
}
 80001fc:	bf00      	nop
 80001fe:	bd80      	pop	{r7, pc}
 8000200:	40021000 	.word	0x40021000
 8000204:	f8ff0000 	.word	0xf8ff0000
 8000208:	e000ed00 	.word	0xe000ed00

0800020c <SystemCoreClockUpdate>:
  *           value for HSE crystal.
  * @param  None
  * @retval None
  */
void SystemCoreClockUpdate (void)
{
 800020c:	b480      	push	{r7}
 800020e:	b085      	sub	sp, #20
 8000210:	af00      	add	r7, sp, #0
  uint32_t tmp = 0, pllmull = 0, pllsource = 0;
 8000212:	2300      	movs	r3, #0
 8000214:	60fb      	str	r3, [r7, #12]
 8000216:	2300      	movs	r3, #0
 8000218:	60bb      	str	r3, [r7, #8]
 800021a:	2300      	movs	r3, #0
 800021c:	607b      	str	r3, [r7, #4]
#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
  uint32_t prediv1factor = 0;
#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
    
  /* Get SYSCLK source -------------------------------------------------------*/
  tmp = RCC->CFGR & RCC_CFGR_SWS;
 800021e:	4b2c      	ldr	r3, [pc, #176]	; (80002d0 <SystemCoreClockUpdate+0xc4>)
 8000220:	685b      	ldr	r3, [r3, #4]
 8000222:	f003 030c 	and.w	r3, r3, #12
 8000226:	60fb      	str	r3, [r7, #12]
  
  switch (tmp)
 8000228:	68fb      	ldr	r3, [r7, #12]
 800022a:	2b04      	cmp	r3, #4
 800022c:	d007      	beq.n	800023e <SystemCoreClockUpdate+0x32>
 800022e:	2b08      	cmp	r3, #8
 8000230:	d009      	beq.n	8000246 <SystemCoreClockUpdate+0x3a>
 8000232:	2b00      	cmp	r3, #0
 8000234:	d133      	bne.n	800029e <SystemCoreClockUpdate+0x92>
  {
    case 0x00:  /* HSI used as system clock */
      SystemCoreClock = HSI_VALUE;
 8000236:	4b27      	ldr	r3, [pc, #156]	; (80002d4 <SystemCoreClockUpdate+0xc8>)
 8000238:	4a27      	ldr	r2, [pc, #156]	; (80002d8 <SystemCoreClockUpdate+0xcc>)
 800023a:	601a      	str	r2, [r3, #0]
      break;
 800023c:	e033      	b.n	80002a6 <SystemCoreClockUpdate+0x9a>
    case 0x04:  /* HSE used as system clock */
      SystemCoreClock = HSE_VALUE;
 800023e:	4b25      	ldr	r3, [pc, #148]	; (80002d4 <SystemCoreClockUpdate+0xc8>)
 8000240:	4a25      	ldr	r2, [pc, #148]	; (80002d8 <SystemCoreClockUpdate+0xcc>)
 8000242:	601a      	str	r2, [r3, #0]
      break;
 8000244:	e02f      	b.n	80002a6 <SystemCoreClockUpdate+0x9a>
    case 0x08:  /* PLL used as system clock */

      /* Get PLL clock source and multiplication factor ----------------------*/
      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
 8000246:	4b22      	ldr	r3, [pc, #136]	; (80002d0 <SystemCoreClockUpdate+0xc4>)
 8000248:	685b      	ldr	r3, [r3, #4]
 800024a:	f403 1370 	and.w	r3, r3, #3932160	; 0x3c0000
 800024e:	60bb      	str	r3, [r7, #8]
      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
 8000250:	4b1f      	ldr	r3, [pc, #124]	; (80002d0 <SystemCoreClockUpdate+0xc4>)
 8000252:	685b      	ldr	r3, [r3, #4]
 8000254:	f403 3380 	and.w	r3, r3, #65536	; 0x10000
 8000258:	607b      	str	r3, [r7, #4]
      
#ifndef STM32F10X_CL      
      pllmull = ( pllmull >> 18) + 2;
 800025a:	68bb      	ldr	r3, [r7, #8]
 800025c:	0c9b      	lsrs	r3, r3, #18
 800025e:	3302      	adds	r3, #2
 8000260:	60bb      	str	r3, [r7, #8]
      
      if (pllsource == 0x00)
 8000262:	687b      	ldr	r3, [r7, #4]
 8000264:	2b00      	cmp	r3, #0
 8000266:	d106      	bne.n	8000276 <SystemCoreClockUpdate+0x6a>
      {
        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
 8000268:	68bb      	ldr	r3, [r7, #8]
 800026a:	4a1c      	ldr	r2, [pc, #112]	; (80002dc <SystemCoreClockUpdate+0xd0>)
 800026c:	fb02 f303 	mul.w	r3, r2, r3
 8000270:	4a18      	ldr	r2, [pc, #96]	; (80002d4 <SystemCoreClockUpdate+0xc8>)
 8000272:	6013      	str	r3, [r2, #0]
          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
        }
      }
#endif /* STM32F10X_CL */ 
      break;
 8000274:	e017      	b.n	80002a6 <SystemCoreClockUpdate+0x9a>
       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
       /* HSE oscillator clock selected as PREDIV1 clock entry */
       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
 #else
        /* HSE selected as PLL clock entry */
        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
 8000276:	4b16      	ldr	r3, [pc, #88]	; (80002d0 <SystemCoreClockUpdate+0xc4>)
 8000278:	685b      	ldr	r3, [r3, #4]
 800027a:	f403 3300 	and.w	r3, r3, #131072	; 0x20000
 800027e:	2b00      	cmp	r3, #0
 8000280:	d006      	beq.n	8000290 <SystemCoreClockUpdate+0x84>
        {/* HSE oscillator clock divided by 2 */
          SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
 8000282:	68bb      	ldr	r3, [r7, #8]
 8000284:	4a15      	ldr	r2, [pc, #84]	; (80002dc <SystemCoreClockUpdate+0xd0>)
 8000286:	fb02 f303 	mul.w	r3, r2, r3
 800028a:	4a12      	ldr	r2, [pc, #72]	; (80002d4 <SystemCoreClockUpdate+0xc8>)
 800028c:	6013      	str	r3, [r2, #0]
          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
        }
      }
#endif /* STM32F10X_CL */ 
      break;
 800028e:	e00a      	b.n	80002a6 <SystemCoreClockUpdate+0x9a>
        {/* HSE oscillator clock divided by 2 */
          SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
        }
        else
        {
          SystemCoreClock = HSE_VALUE * pllmull;
 8000290:	68bb      	ldr	r3, [r7, #8]
 8000292:	4a11      	ldr	r2, [pc, #68]	; (80002d8 <SystemCoreClockUpdate+0xcc>)
 8000294:	fb02 f303 	mul.w	r3, r2, r3
 8000298:	4a0e      	ldr	r2, [pc, #56]	; (80002d4 <SystemCoreClockUpdate+0xc8>)
 800029a:	6013      	str	r3, [r2, #0]
          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
        }
      }
#endif /* STM32F10X_CL */ 
      break;
 800029c:	e003      	b.n	80002a6 <SystemCoreClockUpdate+0x9a>

    default:
      SystemCoreClock = HSI_VALUE;
 800029e:	4b0d      	ldr	r3, [pc, #52]	; (80002d4 <SystemCoreClockUpdate+0xc8>)
 80002a0:	4a0d      	ldr	r2, [pc, #52]	; (80002d8 <SystemCoreClockUpdate+0xcc>)
 80002a2:	601a      	str	r2, [r3, #0]
      break;
 80002a4:	bf00      	nop
  }
  
  /* Compute HCLK clock frequency ----------------*/
  /* Get HCLK prescaler */
  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
 80002a6:	4b0a      	ldr	r3, [pc, #40]	; (80002d0 <SystemCoreClockUpdate+0xc4>)
 80002a8:	685b      	ldr	r3, [r3, #4]
 80002aa:	f003 03f0 	and.w	r3, r3, #240	; 0xf0
 80002ae:	091b      	lsrs	r3, r3, #4
 80002b0:	4a0b      	ldr	r2, [pc, #44]	; (80002e0 <SystemCoreClockUpdate+0xd4>)
 80002b2:	5cd3      	ldrb	r3, [r2, r3]
 80002b4:	b2db      	uxtb	r3, r3
 80002b6:	60fb      	str	r3, [r7, #12]
  /* HCLK clock frequency */
  SystemCoreClock >>= tmp;  
 80002b8:	4b06      	ldr	r3, [pc, #24]	; (80002d4 <SystemCoreClockUpdate+0xc8>)
 80002ba:	681a      	ldr	r2, [r3, #0]
 80002bc:	68fb      	ldr	r3, [r7, #12]
 80002be:	fa22 f303 	lsr.w	r3, r2, r3
 80002c2:	4a04      	ldr	r2, [pc, #16]	; (80002d4 <SystemCoreClockUpdate+0xc8>)
 80002c4:	6013      	str	r3, [r2, #0]
}
 80002c6:	bf00      	nop
 80002c8:	3714      	adds	r7, #20
 80002ca:	46bd      	mov	sp, r7
 80002cc:	bc80      	pop	{r7}
 80002ce:	4770      	bx	lr
 80002d0:	40021000 	.word	0x40021000
 80002d4:	20000000 	.word	0x20000000
 80002d8:	007a1200 	.word	0x007a1200
 80002dc:	003d0900 	.word	0x003d0900
 80002e0:	20000004 	.word	0x20000004

080002e4 <SetSysClock>:
  * @brief  Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
  * @param  None
  * @retval None
  */
static void SetSysClock(void)
{
 80002e4:	b580      	push	{r7, lr}
 80002e6:	af00      	add	r7, sp, #0
#elif defined SYSCLK_FREQ_48MHz
  SetSysClockTo48();
#elif defined SYSCLK_FREQ_56MHz
  SetSysClockTo56();  
#elif defined SYSCLK_FREQ_72MHz
  SetSysClockTo72();
 80002e8:	f000 f802 	bl	80002f0 <SetSysClockTo72>
#endif
 
 /* If none of the define above is enabled, the HSI is used as System clock
    source (default after reset) */ 
}
 80002ec:	bf00      	nop
 80002ee:	bd80      	pop	{r7, pc}

080002f0 <SetSysClockTo72>:
  * @note   This function should be used only after reset.
  * @param  None
  * @retval None
  */
static void SetSysClockTo72(void)
{
 80002f0:	b480      	push	{r7}
 80002f2:	b083      	sub	sp, #12
 80002f4:	af00      	add	r7, sp, #0
  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
 80002f6:	2300      	movs	r3, #0
 80002f8:	607b      	str	r3, [r7, #4]
 80002fa:	2300      	movs	r3, #0
 80002fc:	603b      	str	r3, [r7, #0]
  
  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
  /* Enable HSE */    
  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
 80002fe:	4a3a      	ldr	r2, [pc, #232]	; (80003e8 <SetSysClockTo72+0xf8>)
 8000300:	4b39      	ldr	r3, [pc, #228]	; (80003e8 <SetSysClockTo72+0xf8>)
 8000302:	681b      	ldr	r3, [r3, #0]
 8000304:	f443 3380 	orr.w	r3, r3, #65536	; 0x10000
 8000308:	6013      	str	r3, [r2, #0]
 
  /* Wait till HSE is ready and if Time out is reached exit */
  do
  {
    HSEStatus = RCC->CR & RCC_CR_HSERDY;
 800030a:	4b37      	ldr	r3, [pc, #220]	; (80003e8 <SetSysClockTo72+0xf8>)
 800030c:	681b      	ldr	r3, [r3, #0]
 800030e:	f403 3300 	and.w	r3, r3, #131072	; 0x20000
 8000312:	603b      	str	r3, [r7, #0]
    StartUpCounter++;  
 8000314:	687b      	ldr	r3, [r7, #4]
 8000316:	3301      	adds	r3, #1
 8000318:	607b      	str	r3, [r7, #4]
  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
 800031a:	683b      	ldr	r3, [r7, #0]
 800031c:	2b00      	cmp	r3, #0
 800031e:	d103      	bne.n	8000328 <SetSysClockTo72+0x38>
 8000320:	687b      	ldr	r3, [r7, #4]
 8000322:	f5b3 6fa0 	cmp.w	r3, #1280	; 0x500
 8000326:	d1f0      	bne.n	800030a <SetSysClockTo72+0x1a>

  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
 8000328:	4b2f      	ldr	r3, [pc, #188]	; (80003e8 <SetSysClockTo72+0xf8>)
 800032a:	681b      	ldr	r3, [r3, #0]
 800032c:	f403 3300 	and.w	r3, r3, #131072	; 0x20000
 8000330:	2b00      	cmp	r3, #0
 8000332:	d002      	beq.n	800033a <SetSysClockTo72+0x4a>
  {
    HSEStatus = (uint32_t)0x01;
 8000334:	2301      	movs	r3, #1
 8000336:	603b      	str	r3, [r7, #0]
 8000338:	e001      	b.n	800033e <SetSysClockTo72+0x4e>
  }
  else
  {
    HSEStatus = (uint32_t)0x00;
 800033a:	2300      	movs	r3, #0
 800033c:	603b      	str	r3, [r7, #0]
  }  

  if (HSEStatus == (uint32_t)0x01)
 800033e:	683b      	ldr	r3, [r7, #0]
 8000340:	2b01      	cmp	r3, #1
 8000342:	d14b      	bne.n	80003dc <SetSysClockTo72+0xec>
  {
    /* Enable Prefetch Buffer */
    FLASH->ACR |= FLASH_ACR_PRFTBE;
 8000344:	4a29      	ldr	r2, [pc, #164]	; (80003ec <SetSysClockTo72+0xfc>)
 8000346:	4b29      	ldr	r3, [pc, #164]	; (80003ec <SetSysClockTo72+0xfc>)
 8000348:	681b      	ldr	r3, [r3, #0]
 800034a:	f043 0310 	orr.w	r3, r3, #16
 800034e:	6013      	str	r3, [r2, #0]

    /* Flash 2 wait state */
    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
 8000350:	4a26      	ldr	r2, [pc, #152]	; (80003ec <SetSysClockTo72+0xfc>)
 8000352:	4b26      	ldr	r3, [pc, #152]	; (80003ec <SetSysClockTo72+0xfc>)
 8000354:	681b      	ldr	r3, [r3, #0]
 8000356:	f023 0303 	bic.w	r3, r3, #3
 800035a:	6013      	str	r3, [r2, #0]
    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
 800035c:	4a23      	ldr	r2, [pc, #140]	; (80003ec <SetSysClockTo72+0xfc>)
 800035e:	4b23      	ldr	r3, [pc, #140]	; (80003ec <SetSysClockTo72+0xfc>)
 8000360:	681b      	ldr	r3, [r3, #0]
 8000362:	f043 0302 	orr.w	r3, r3, #2
 8000366:	6013      	str	r3, [r2, #0]

 
    /* HCLK = SYSCLK */
    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
 8000368:	4a1f      	ldr	r2, [pc, #124]	; (80003e8 <SetSysClockTo72+0xf8>)
 800036a:	4b1f      	ldr	r3, [pc, #124]	; (80003e8 <SetSysClockTo72+0xf8>)
 800036c:	685b      	ldr	r3, [r3, #4]
 800036e:	6053      	str	r3, [r2, #4]
      
    /* PCLK2 = HCLK */
    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
 8000370:	4a1d      	ldr	r2, [pc, #116]	; (80003e8 <SetSysClockTo72+0xf8>)
 8000372:	4b1d      	ldr	r3, [pc, #116]	; (80003e8 <SetSysClockTo72+0xf8>)
 8000374:	685b      	ldr	r3, [r3, #4]
 8000376:	6053      	str	r3, [r2, #4]
    
    /* PCLK1 = HCLK */
    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
 8000378:	4a1b      	ldr	r2, [pc, #108]	; (80003e8 <SetSysClockTo72+0xf8>)
 800037a:	4b1b      	ldr	r3, [pc, #108]	; (80003e8 <SetSysClockTo72+0xf8>)
 800037c:	685b      	ldr	r3, [r3, #4]
 800037e:	f443 6380 	orr.w	r3, r3, #1024	; 0x400
 8000382:	6053      	str	r3, [r2, #4]
    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
                            RCC_CFGR_PLLMULL9); 
#else    
    /*  PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
 8000384:	4a18      	ldr	r2, [pc, #96]	; (80003e8 <SetSysClockTo72+0xf8>)
 8000386:	4b18      	ldr	r3, [pc, #96]	; (80003e8 <SetSysClockTo72+0xf8>)
 8000388:	685b      	ldr	r3, [r3, #4]
 800038a:	f423 137c 	bic.w	r3, r3, #4128768	; 0x3f0000
 800038e:	6053      	str	r3, [r2, #4]
                                        RCC_CFGR_PLLMULL));
    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
 8000390:	4a15      	ldr	r2, [pc, #84]	; (80003e8 <SetSysClockTo72+0xf8>)
 8000392:	4b15      	ldr	r3, [pc, #84]	; (80003e8 <SetSysClockTo72+0xf8>)
 8000394:	685b      	ldr	r3, [r3, #4]
 8000396:	f443 13e8 	orr.w	r3, r3, #1900544	; 0x1d0000
 800039a:	6053      	str	r3, [r2, #4]
#endif /* STM32F10X_CL */

    /* Enable PLL */
    RCC->CR |= RCC_CR_PLLON;
 800039c:	4a12      	ldr	r2, [pc, #72]	; (80003e8 <SetSysClockTo72+0xf8>)
 800039e:	4b12      	ldr	r3, [pc, #72]	; (80003e8 <SetSysClockTo72+0xf8>)
 80003a0:	681b      	ldr	r3, [r3, #0]
 80003a2:	f043 7380 	orr.w	r3, r3, #16777216	; 0x1000000
 80003a6:	6013      	str	r3, [r2, #0]

    /* Wait till PLL is ready */
    while((RCC->CR & RCC_CR_PLLRDY) == 0)
 80003a8:	bf00      	nop
 80003aa:	4b0f      	ldr	r3, [pc, #60]	; (80003e8 <SetSysClockTo72+0xf8>)
 80003ac:	681b      	ldr	r3, [r3, #0]
 80003ae:	f003 7300 	and.w	r3, r3, #33554432	; 0x2000000
 80003b2:	2b00      	cmp	r3, #0
 80003b4:	d0f9      	beq.n	80003aa <SetSysClockTo72+0xba>
    {
    }
    
    /* Select PLL as system clock source */
    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
 80003b6:	4a0c      	ldr	r2, [pc, #48]	; (80003e8 <SetSysClockTo72+0xf8>)
 80003b8:	4b0b      	ldr	r3, [pc, #44]	; (80003e8 <SetSysClockTo72+0xf8>)
 80003ba:	685b      	ldr	r3, [r3, #4]
 80003bc:	f023 0303 	bic.w	r3, r3, #3
 80003c0:	6053      	str	r3, [r2, #4]
    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
 80003c2:	4a09      	ldr	r2, [pc, #36]	; (80003e8 <SetSysClockTo72+0xf8>)
 80003c4:	4b08      	ldr	r3, [pc, #32]	; (80003e8 <SetSysClockTo72+0xf8>)
 80003c6:	685b      	ldr	r3, [r3, #4]
 80003c8:	f043 0302 	orr.w	r3, r3, #2
 80003cc:	6053      	str	r3, [r2, #4]

    /* Wait till PLL is used as system clock source */
    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
 80003ce:	bf00      	nop
 80003d0:	4b05      	ldr	r3, [pc, #20]	; (80003e8 <SetSysClockTo72+0xf8>)
 80003d2:	685b      	ldr	r3, [r3, #4]
 80003d4:	f003 030c 	and.w	r3, r3, #12
 80003d8:	2b08      	cmp	r3, #8
 80003da:	d1f9      	bne.n	80003d0 <SetSysClockTo72+0xe0>
  }
  else
  { /* If HSE fails to start-up, the application will have wrong clock 
         configuration. User can add here some code to deal with this error */
  }
}
 80003dc:	bf00      	nop
 80003de:	370c      	adds	r7, #12
 80003e0:	46bd      	mov	sp, r7
 80003e2:	bc80      	pop	{r7}
 80003e4:	4770      	bx	lr
 80003e6:	bf00      	nop
 80003e8:	40021000 	.word	0x40021000
 80003ec:	40022000 	.word	0x40022000

080003f0 <ADC_Cmd>:
FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx);
void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);


void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState)                                                                    
{                                                                                                                            
 80003f0:	b480      	push	{r7}
 80003f2:	b083      	sub	sp, #12
 80003f4:	af00      	add	r7, sp, #0
 80003f6:	6078      	str	r0, [r7, #4]
 80003f8:	460b      	mov	r3, r1
 80003fa:	70fb      	strb	r3, [r7, #3]
  /* Check the parameters */                                                                                                 
  assert_param(IS_ADC_ALL_PERIPH(ADCx));                                                                                     
  assert_param(IS_FUNCTIONAL_STATE(NewState));                                                                               
  if (NewState != DISABLE)                                                                                                   
 80003fc:	78fb      	ldrb	r3, [r7, #3]
 80003fe:	2b00      	cmp	r3, #0
 8000400:	d006      	beq.n	8000410 <ADC_Cmd+0x20>
  {                                                                                                                          
    /* Set the ADON bit to wake up the ADC from power down mode */                                                           
    ADCx->CR2 |= CR2_ADON_Set;                                                                                               
 8000402:	687b      	ldr	r3, [r7, #4]
 8000404:	689b      	ldr	r3, [r3, #8]
 8000406:	f043 0201 	orr.w	r2, r3, #1
 800040a:	687b      	ldr	r3, [r7, #4]
 800040c:	609a      	str	r2, [r3, #8]
  else                                                                                                                       
  {                                                                                                                          
    /* Disable the selected ADC peripheral */                                                                                
    ADCx->CR2 &= CR2_ADON_Reset;                                                                                             
  }                                                                                                                          
} 
 800040e:	e005      	b.n	800041c <ADC_Cmd+0x2c>
    ADCx->CR2 |= CR2_ADON_Set;                                                                                               
  }                                                                                                                          
  else                                                                                                                       
  {                                                                                                                          
    /* Disable the selected ADC peripheral */                                                                                
    ADCx->CR2 &= CR2_ADON_Reset;                                                                                             
 8000410:	687b      	ldr	r3, [r7, #4]
 8000412:	689b      	ldr	r3, [r3, #8]
 8000414:	f023 0201 	bic.w	r2, r3, #1
 8000418:	687b      	ldr	r3, [r7, #4]
 800041a:	609a      	str	r2, [r3, #8]
  }                                                                                                                          
} 
 800041c:	bf00      	nop
 800041e:	370c      	adds	r7, #12
 8000420:	46bd      	mov	sp, r7
 8000422:	bc80      	pop	{r7}
 8000424:	4770      	bx	lr
 8000426:	bf00      	nop

08000428 <SPI_I2S_GetFlagStatus>:




FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG)
{
 8000428:	b480      	push	{r7}
 800042a:	b085      	sub	sp, #20
 800042c:	af00      	add	r7, sp, #0
 800042e:	6078      	str	r0, [r7, #4]
 8000430:	460b      	mov	r3, r1
 8000432:	807b      	strh	r3, [r7, #2]
  FlagStatus bitstatus = RESET;
 8000434:	2300      	movs	r3, #0
 8000436:	73fb      	strb	r3, [r7, #15]
  /* Check the parameters */
  assert_param(IS_SPI_ALL_PERIPH(SPIx));
  assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG));
  /* Check the status of the specified SPI/I2S flag */
  if ((SPIx->SR & SPI_I2S_FLAG) != (uint16_t)RESET)
 8000438:	687b      	ldr	r3, [r7, #4]
 800043a:	891b      	ldrh	r3, [r3, #8]
 800043c:	b29a      	uxth	r2, r3
 800043e:	887b      	ldrh	r3, [r7, #2]
 8000440:	4013      	ands	r3, r2
 8000442:	b29b      	uxth	r3, r3
 8000444:	2b00      	cmp	r3, #0
 8000446:	d002      	beq.n	800044e <SPI_I2S_GetFlagStatus+0x26>
  {
    /* SPI_I2S_FLAG is set */
    bitstatus = SET;
 8000448:	2301      	movs	r3, #1
 800044a:	73fb      	strb	r3, [r7, #15]
 800044c:	e001      	b.n	8000452 <SPI_I2S_GetFlagStatus+0x2a>
  }
  else
  {
    /* SPI_I2S_FLAG is reset */
    bitstatus = RESET;
 800044e:	2300      	movs	r3, #0
 8000450:	73fb      	strb	r3, [r7, #15]
  }
  /* Return the SPI_I2S_FLAG status */
  return  bitstatus;
 8000452:	7bfb      	ldrb	r3, [r7, #15]
}
 8000454:	4618      	mov	r0, r3
 8000456:	3714      	adds	r7, #20
 8000458:	46bd      	mov	sp, r7
 800045a:	bc80      	pop	{r7}
 800045c:	4770      	bx	lr
 800045e:	bf00      	nop

08000460 <SPI_I2S_SendData>:


void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data)
{
 8000460:	b480      	push	{r7}
 8000462:	b083      	sub	sp, #12
 8000464:	af00      	add	r7, sp, #0
 8000466:	6078      	str	r0, [r7, #4]
 8000468:	460b      	mov	r3, r1
 800046a:	807b      	strh	r3, [r7, #2]
  /* Check the parameters */
  assert_param(IS_SPI_ALL_PERIPH(SPIx));
  
  /* Write in the DR register the data to be sent */
  SPIx->DR = Data;
 800046c:	687b      	ldr	r3, [r7, #4]
 800046e:	887a      	ldrh	r2, [r7, #2]
 8000470:	819a      	strh	r2, [r3, #12]
}
 8000472:	bf00      	nop
 8000474:	370c      	adds	r7, #12
 8000476:	46bd      	mov	sp, r7
 8000478:	bc80      	pop	{r7}
 800047a:	4770      	bx	lr

0800047c <ADC_ResetCalibration>:

void ADC_ResetCalibration(ADC_TypeDef* ADCx)
{
 800047c:	b480      	push	{r7}
 800047e:	b083      	sub	sp, #12
 8000480:	af00      	add	r7, sp, #0
 8000482:	6078      	str	r0, [r7, #4]
  /* Check the parameters */
  assert_param(IS_ADC_ALL_PERIPH(ADCx));
  /* Resets the selected ADC calibration registers */
  ADCx->CR2 |= CR2_RSTCAL_Set;
 8000484:	687b      	ldr	r3, [r7, #4]
 8000486:	689b      	ldr	r3, [r3, #8]
 8000488:	f043 0208 	orr.w	r2, r3, #8
 800048c:	687b      	ldr	r3, [r7, #4]
 800048e:	609a      	str	r2, [r3, #8]
}
 8000490:	bf00      	nop
 8000492:	370c      	adds	r7, #12
 8000494:	46bd      	mov	sp, r7
 8000496:	bc80      	pop	{r7}
 8000498:	4770      	bx	lr
 800049a:	bf00      	nop

0800049c <ADC_GetResetCalibrationStatus>:

FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx)
{
 800049c:	b480      	push	{r7}
 800049e:	b085      	sub	sp, #20
 80004a0:	af00      	add	r7, sp, #0
 80004a2:	6078      	str	r0, [r7, #4]
  FlagStatus bitstatus = RESET;
 80004a4:	2300      	movs	r3, #0
 80004a6:	73fb      	strb	r3, [r7, #15]
  /* Check the parameters */
  assert_param(IS_ADC_ALL_PERIPH(ADCx));
  /* Check the status of RSTCAL bit */
  if ((ADCx->CR2 & CR2_RSTCAL_Set) != (uint32_t)RESET)
 80004a8:	687b      	ldr	r3, [r7, #4]
 80004aa:	689b      	ldr	r3, [r3, #8]
 80004ac:	f003 0308 	and.w	r3, r3, #8
 80004b0:	2b00      	cmp	r3, #0
 80004b2:	d002      	beq.n	80004ba <ADC_GetResetCalibrationStatus+0x1e>
  {
    /* RSTCAL bit is set */
    bitstatus = SET;
 80004b4:	2301      	movs	r3, #1
 80004b6:	73fb      	strb	r3, [r7, #15]
 80004b8:	e001      	b.n	80004be <ADC_GetResetCalibrationStatus+0x22>
  }
  else
  {
    /* RSTCAL bit is reset */
    bitstatus = RESET;
 80004ba:	2300      	movs	r3, #0
 80004bc:	73fb      	strb	r3, [r7, #15]
  }
  /* Return the RSTCAL bit status */
  return  bitstatus;
 80004be:	7bfb      	ldrb	r3, [r7, #15]
}
 80004c0:	4618      	mov	r0, r3
 80004c2:	3714      	adds	r7, #20
 80004c4:	46bd      	mov	sp, r7
 80004c6:	bc80      	pop	{r7}
 80004c8:	4770      	bx	lr
 80004ca:	bf00      	nop

080004cc <ADC_StartCalibration>:

void ADC_StartCalibration(ADC_TypeDef* ADCx)
{
 80004cc:	b480      	push	{r7}
 80004ce:	b083      	sub	sp, #12
 80004d0:	af00      	add	r7, sp, #0
 80004d2:	6078      	str	r0, [r7, #4]
  /* Check the parameters */
  assert_param(IS_ADC_ALL_PERIPH(ADCx));
  /* Enable the selected ADC calibration process */
  ADCx->CR2 |= CR2_CAL_Set;
 80004d4:	687b      	ldr	r3, [r7, #4]
 80004d6:	689b      	ldr	r3, [r3, #8]
 80004d8:	f043 0204 	orr.w	r2, r3, #4
 80004dc:	687b      	ldr	r3, [r7, #4]
 80004de:	609a      	str	r2, [r3, #8]
}
 80004e0:	bf00      	nop
 80004e2:	370c      	adds	r7, #12
 80004e4:	46bd      	mov	sp, r7
 80004e6:	bc80      	pop	{r7}
 80004e8:	4770      	bx	lr
 80004ea:	bf00      	nop

080004ec <ADC_GetCalibrationStatus>:


FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx)
{
 80004ec:	b480      	push	{r7}
 80004ee:	b085      	sub	sp, #20
 80004f0:	af00      	add	r7, sp, #0
 80004f2:	6078      	str	r0, [r7, #4]
  FlagStatus bitstatus = RESET;
 80004f4:	2300      	movs	r3, #0
 80004f6:	73fb      	strb	r3, [r7, #15]
  /* Check the parameters */
  assert_param(IS_ADC_ALL_PERIPH(ADCx));
  /* Check the status of CAL bit */
  if ((ADCx->CR2 & CR2_CAL_Set) != (uint32_t)RESET)
 80004f8:	687b      	ldr	r3, [r7, #4]
 80004fa:	689b      	ldr	r3, [r3, #8]
 80004fc:	f003 0304 	and.w	r3, r3, #4
 8000500:	2b00      	cmp	r3, #0
 8000502:	d002      	beq.n	800050a <ADC_GetCalibrationStatus+0x1e>
  {
    /* CAL bit is set: calibration on going */
    bitstatus = SET;
 8000504:	2301      	movs	r3, #1
 8000506:	73fb      	strb	r3, [r7, #15]
 8000508:	e001      	b.n	800050e <ADC_GetCalibrationStatus+0x22>
  }
  else
  {
    /* CAL bit is reset: end of calibration */
    bitstatus = RESET;
 800050a:	2300      	movs	r3, #0
 800050c:	73fb      	strb	r3, [r7, #15]
  }
  /* Return the CAL bit status */
  return  bitstatus;
 800050e:	7bfb      	ldrb	r3, [r7, #15]
}
 8000510:	4618      	mov	r0, r3
 8000512:	3714      	adds	r7, #20
 8000514:	46bd      	mov	sp, r7
 8000516:	bc80      	pop	{r7}
 8000518:	4770      	bx	lr
 800051a:	bf00      	nop

0800051c <ADC_SoftwareStartConvCmd>:

void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
{
 800051c:	b480      	push	{r7}
 800051e:	b083      	sub	sp, #12
 8000520:	af00      	add	r7, sp, #0
 8000522:	6078      	str	r0, [r7, #4]
 8000524:	460b      	mov	r3, r1
 8000526:	70fb      	strb	r3, [r7, #3]
  /* Check the parameters */
  assert_param(IS_ADC_ALL_PERIPH(ADCx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  if (NewState != DISABLE)
 8000528:	78fb      	ldrb	r3, [r7, #3]
 800052a:	2b00      	cmp	r3, #0
 800052c:	d006      	beq.n	800053c <ADC_SoftwareStartConvCmd+0x20>
  {
    /* Enable the selected ADC conversion on external event and start the selected
       ADC conversion */
    ADCx->CR2 |= CR2_EXTTRIG_SWSTART_Set;
 800052e:	687b      	ldr	r3, [r7, #4]
 8000530:	689b      	ldr	r3, [r3, #8]
 8000532:	f443 02a0 	orr.w	r2, r3, #5242880	; 0x500000
 8000536:	687b      	ldr	r3, [r7, #4]
 8000538:	609a      	str	r2, [r3, #8]
  {
    /* Disable the selected ADC conversion on external event and stop the selected
       ADC conversion */
    ADCx->CR2 &= CR2_EXTTRIG_SWSTART_Reset;
  }
}
 800053a:	e005      	b.n	8000548 <ADC_SoftwareStartConvCmd+0x2c>
  }
  else
  {
    /* Disable the selected ADC conversion on external event and stop the selected
       ADC conversion */
    ADCx->CR2 &= CR2_EXTTRIG_SWSTART_Reset;
 800053c:	687b      	ldr	r3, [r7, #4]
 800053e:	689b      	ldr	r3, [r3, #8]
 8000540:	f423 02a0 	bic.w	r2, r3, #5242880	; 0x500000
 8000544:	687b      	ldr	r3, [r7, #4]
 8000546:	609a      	str	r2, [r3, #8]
  }
}
 8000548:	bf00      	nop
 800054a:	370c      	adds	r7, #12
 800054c:	46bd      	mov	sp, r7
 800054e:	bc80      	pop	{r7}
 8000550:	4770      	bx	lr
 8000552:	bf00      	nop

08000554 <SPI_I2S_ReceiveData>:

uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx)
{
 8000554:	b480      	push	{r7}
 8000556:	b083      	sub	sp, #12
 8000558:	af00      	add	r7, sp, #0
 800055a:	6078      	str	r0, [r7, #4]
  /* Check the parameters */
  assert_param(IS_SPI_ALL_PERIPH(SPIx));
  
  /* Return the data in the DR register */
  return SPIx->DR;
 800055c:	687b      	ldr	r3, [r7, #4]
 800055e:	899b      	ldrh	r3, [r3, #12]
 8000560:	b29b      	uxth	r3, r3
}
 8000562:	4618      	mov	r0, r3
 8000564:	370c      	adds	r7, #12
 8000566:	46bd      	mov	sp, r7
 8000568:	bc80      	pop	{r7}
 800056a:	4770      	bx	lr

0800056c <SD_WriteByte>:



uint8_t SD_WriteByte(uint8_t Data)
{
 800056c:	b580      	push	{r7, lr}
 800056e:	b082      	sub	sp, #8
 8000570:	af00      	add	r7, sp, #0
 8000572:	4603      	mov	r3, r0
 8000574:	71fb      	strb	r3, [r7, #7]
  /*!< Wait until the transmit buffer is empty */
  while(SPI_I2S_GetFlagStatus(SD_SPI, SPI_I2S_FLAG_TXE) == RESET)
 8000576:	bf00      	nop
 8000578:	2102      	movs	r1, #2
 800057a:	480e      	ldr	r0, [pc, #56]	; (80005b4 <SD_WriteByte+0x48>)
 800057c:	f7ff ff54 	bl	8000428 <SPI_I2S_GetFlagStatus>
 8000580:	4603      	mov	r3, r0
 8000582:	2b00      	cmp	r3, #0
 8000584:	d0f8      	beq.n	8000578 <SD_WriteByte+0xc>
  {
  }
  
  /*!< Send the byte */
  SPI_I2S_SendData(SD_SPI, Data);
 8000586:	79fb      	ldrb	r3, [r7, #7]
 8000588:	b29b      	uxth	r3, r3
 800058a:	4619      	mov	r1, r3
 800058c:	4809      	ldr	r0, [pc, #36]	; (80005b4 <SD_WriteByte+0x48>)
 800058e:	f7ff ff67 	bl	8000460 <SPI_I2S_SendData>
  
  /*!< Wait to receive a byte*/
  while(SPI_I2S_GetFlagStatus(SD_SPI, SPI_I2S_FLAG_RXNE) == RESET)
 8000592:	bf00      	nop
 8000594:	2101      	movs	r1, #1
 8000596:	4807      	ldr	r0, [pc, #28]	; (80005b4 <SD_WriteByte+0x48>)
 8000598:	f7ff ff46 	bl	8000428 <SPI_I2S_GetFlagStatus>
 800059c:	4603      	mov	r3, r0
 800059e:	2b00      	cmp	r3, #0
 80005a0:	d0f8      	beq.n	8000594 <SD_WriteByte+0x28>
  {
  }
  
  /*!< Return the byte read from the SPI bus */ 
  return SPI_I2S_ReceiveData(SD_SPI);
 80005a2:	4804      	ldr	r0, [pc, #16]	; (80005b4 <SD_WriteByte+0x48>)
 80005a4:	f7ff ffd6 	bl	8000554 <SPI_I2S_ReceiveData>
 80005a8:	4603      	mov	r3, r0
 80005aa:	b2db      	uxtb	r3, r3
}
 80005ac:	4618      	mov	r0, r3
 80005ae:	3708      	adds	r7, #8
 80005b0:	46bd      	mov	sp, r7
 80005b2:	bd80      	pop	{r7, pc}
 80005b4:	40013000 	.word	0x40013000

080005b8 <GPIO_Init>:



void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct)
{
 80005b8:	b480      	push	{r7}
 80005ba:	b089      	sub	sp, #36	; 0x24
 80005bc:	af00      	add	r7, sp, #0
 80005be:	6078      	str	r0, [r7, #4]
 80005c0:	6039      	str	r1, [r7, #0]
  uint32_t currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00;
 80005c2:	2300      	movs	r3, #0
 80005c4:	61fb      	str	r3, [r7, #28]
 80005c6:	2300      	movs	r3, #0
 80005c8:	613b      	str	r3, [r7, #16]
 80005ca:	2300      	movs	r3, #0
 80005cc:	61bb      	str	r3, [r7, #24]
 80005ce:	2300      	movs	r3, #0
 80005d0:	60fb      	str	r3, [r7, #12]
  uint32_t tmpreg = 0x00, pinmask = 0x00;
 80005d2:	2300      	movs	r3, #0
 80005d4:	617b      	str	r3, [r7, #20]
 80005d6:	2300      	movs	r3, #0
 80005d8:	60bb      	str	r3, [r7, #8]
  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
  assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode));
  assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin));  
  
/*---------------------------- GPIO Mode Configuration -----------------------*/
  currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F);
 80005da:	683b      	ldr	r3, [r7, #0]
 80005dc:	78db      	ldrb	r3, [r3, #3]
 80005de:	f003 030f 	and.w	r3, r3, #15
 80005e2:	61fb      	str	r3, [r7, #28]
  if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00)
 80005e4:	683b      	ldr	r3, [r7, #0]
 80005e6:	78db      	ldrb	r3, [r3, #3]
 80005e8:	f003 0310 	and.w	r3, r3, #16
 80005ec:	2b00      	cmp	r3, #0
 80005ee:	d005      	beq.n	80005fc <GPIO_Init+0x44>
  { 
    /* Check the parameters */
    assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed));
    /* Output mode */
    currentmode |= (uint32_t)GPIO_InitStruct->GPIO_Speed;
 80005f0:	683b      	ldr	r3, [r7, #0]
 80005f2:	789b      	ldrb	r3, [r3, #2]
 80005f4:	461a      	mov	r2, r3
 80005f6:	69fb      	ldr	r3, [r7, #28]
 80005f8:	4313      	orrs	r3, r2
 80005fa:	61fb      	str	r3, [r7, #28]
  }
/*---------------------------- GPIO CRL Configuration ------------------------*/
  /* Configure the eight low port pins */
  if (((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00)
 80005fc:	683b      	ldr	r3, [r7, #0]
 80005fe:	881b      	ldrh	r3, [r3, #0]
 8000600:	b2db      	uxtb	r3, r3
 8000602:	2b00      	cmp	r3, #0
 8000604:	d044      	beq.n	8000690 <GPIO_Init+0xd8>
  {
    tmpreg = GPIOx->CRL;
 8000606:	687b      	ldr	r3, [r7, #4]
 8000608:	681b      	ldr	r3, [r3, #0]
 800060a:	617b      	str	r3, [r7, #20]
    for (pinpos = 0x00; pinpos < 0x08; pinpos++)
 800060c:	2300      	movs	r3, #0
 800060e:	61bb      	str	r3, [r7, #24]
 8000610:	e038      	b.n	8000684 <GPIO_Init+0xcc>
    {
      pos = ((uint32_t)0x01) << pinpos;
 8000612:	2201      	movs	r2, #1
 8000614:	69bb      	ldr	r3, [r7, #24]
 8000616:	fa02 f303 	lsl.w	r3, r2, r3
 800061a:	60fb      	str	r3, [r7, #12]
      /* Get the port pins position */
      currentpin = (GPIO_InitStruct->GPIO_Pin) & pos;
 800061c:	683b      	ldr	r3, [r7, #0]
 800061e:	881b      	ldrh	r3, [r3, #0]
 8000620:	461a      	mov	r2, r3
 8000622:	68fb      	ldr	r3, [r7, #12]
 8000624:	4013      	ands	r3, r2
 8000626:	613b      	str	r3, [r7, #16]
      if (currentpin == pos)
 8000628:	693a      	ldr	r2, [r7, #16]
 800062a:	68fb      	ldr	r3, [r7, #12]
 800062c:	429a      	cmp	r2, r3
 800062e:	d126      	bne.n	800067e <GPIO_Init+0xc6>
      {
        pos = pinpos << 2;
 8000630:	69bb      	ldr	r3, [r7, #24]
 8000632:	009b      	lsls	r3, r3, #2
 8000634:	60fb      	str	r3, [r7, #12]
        /* Clear the corresponding low control register bits */
        pinmask = ((uint32_t)0x0F) << pos;
 8000636:	220f      	movs	r2, #15
 8000638:	68fb      	ldr	r3, [r7, #12]
 800063a:	fa02 f303 	lsl.w	r3, r2, r3
 800063e:	60bb      	str	r3, [r7, #8]
        tmpreg &= ~pinmask;
 8000640:	68bb      	ldr	r3, [r7, #8]
 8000642:	43db      	mvns	r3, r3
 8000644:	697a      	ldr	r2, [r7, #20]
 8000646:	4013      	ands	r3, r2
 8000648:	617b      	str	r3, [r7, #20]
        /* Write the mode configuration in the corresponding bits */
        tmpreg |= (currentmode << pos);
 800064a:	69fa      	ldr	r2, [r7, #28]
 800064c:	68fb      	ldr	r3, [r7, #12]
 800064e:	fa02 f303 	lsl.w	r3, r2, r3
 8000652:	697a      	ldr	r2, [r7, #20]
 8000654:	4313      	orrs	r3, r2
 8000656:	617b      	str	r3, [r7, #20]
        /* Reset the corresponding ODR bit */
        if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
 8000658:	683b      	ldr	r3, [r7, #0]
 800065a:	78db      	ldrb	r3, [r3, #3]
 800065c:	2b28      	cmp	r3, #40	; 0x28
 800065e:	d105      	bne.n	800066c <GPIO_Init+0xb4>
        {
          GPIOx->BRR = (((uint32_t)0x01) << pinpos);
 8000660:	2201      	movs	r2, #1
 8000662:	69bb      	ldr	r3, [r7, #24]
 8000664:	409a      	lsls	r2, r3
 8000666:	687b      	ldr	r3, [r7, #4]
 8000668:	615a      	str	r2, [r3, #20]
 800066a:	e008      	b.n	800067e <GPIO_Init+0xc6>
        }
        else
        {
          /* Set the corresponding ODR bit */
          if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
 800066c:	683b      	ldr	r3, [r7, #0]
 800066e:	78db      	ldrb	r3, [r3, #3]
 8000670:	2b48      	cmp	r3, #72	; 0x48
 8000672:	d104      	bne.n	800067e <GPIO_Init+0xc6>
          {
            GPIOx->BSRR = (((uint32_t)0x01) << pinpos);
 8000674:	2201      	movs	r2, #1
 8000676:	69bb      	ldr	r3, [r7, #24]
 8000678:	409a      	lsls	r2, r3
 800067a:	687b      	ldr	r3, [r7, #4]
 800067c:	611a      	str	r2, [r3, #16]
/*---------------------------- GPIO CRL Configuration ------------------------*/
  /* Configure the eight low port pins */
  if (((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00)
  {
    tmpreg = GPIOx->CRL;
    for (pinpos = 0x00; pinpos < 0x08; pinpos++)
 800067e:	69bb      	ldr	r3, [r7, #24]
 8000680:	3301      	adds	r3, #1
 8000682:	61bb      	str	r3, [r7, #24]
 8000684:	69bb      	ldr	r3, [r7, #24]
 8000686:	2b07      	cmp	r3, #7
 8000688:	d9c3      	bls.n	8000612 <GPIO_Init+0x5a>
            GPIOx->BSRR = (((uint32_t)0x01) << pinpos);
          }
        }
      }
    }
    GPIOx->CRL = tmpreg;
 800068a:	687b      	ldr	r3, [r7, #4]
 800068c:	697a      	ldr	r2, [r7, #20]
 800068e:	601a      	str	r2, [r3, #0]
  }

/*---------------------------- GPIO CRH Configuration ------------------------*/
  /* Configure the eight high port pins */
  if (GPIO_InitStruct->GPIO_Pin > 0x00FF)
 8000690:	683b      	ldr	r3, [r7, #0]
 8000692:	881b      	ldrh	r3, [r3, #0]
 8000694:	2bff      	cmp	r3, #255	; 0xff
 8000696:	d946      	bls.n	8000726 <GPIO_Init+0x16e>
  {
    tmpreg = GPIOx->CRH;
 8000698:	687b      	ldr	r3, [r7, #4]
 800069a:	685b      	ldr	r3, [r3, #4]
 800069c:	617b      	str	r3, [r7, #20]
    for (pinpos = 0x00; pinpos < 0x08; pinpos++)
 800069e:	2300      	movs	r3, #0
 80006a0:	61bb      	str	r3, [r7, #24]
 80006a2:	e03a      	b.n	800071a <GPIO_Init+0x162>
    {
      pos = (((uint32_t)0x01) << (pinpos + 0x08));
 80006a4:	69bb      	ldr	r3, [r7, #24]
 80006a6:	3308      	adds	r3, #8
 80006a8:	2201      	movs	r2, #1
 80006aa:	fa02 f303 	lsl.w	r3, r2, r3
 80006ae:	60fb      	str	r3, [r7, #12]
      /* Get the port pins position */
      currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos);
 80006b0:	683b      	ldr	r3, [r7, #0]
 80006b2:	881b      	ldrh	r3, [r3, #0]
 80006b4:	461a      	mov	r2, r3
 80006b6:	68fb      	ldr	r3, [r7, #12]
 80006b8:	4013      	ands	r3, r2
 80006ba:	613b      	str	r3, [r7, #16]
      if (currentpin == pos)
 80006bc:	693a      	ldr	r2, [r7, #16]
 80006be:	68fb      	ldr	r3, [r7, #12]
 80006c0:	429a      	cmp	r2, r3
 80006c2:	d127      	bne.n	8000714 <GPIO_Init+0x15c>
      {
        pos = pinpos << 2;
 80006c4:	69bb      	ldr	r3, [r7, #24]
 80006c6:	009b      	lsls	r3, r3, #2
 80006c8:	60fb      	str	r3, [r7, #12]
        /* Clear the corresponding high control register bits */
        pinmask = ((uint32_t)0x0F) << pos;
 80006ca:	220f      	movs	r2, #15
 80006cc:	68fb      	ldr	r3, [r7, #12]
 80006ce:	fa02 f303 	lsl.w	r3, r2, r3
 80006d2:	60bb      	str	r3, [r7, #8]
        tmpreg &= ~pinmask;
 80006d4:	68bb      	ldr	r3, [r7, #8]
 80006d6:	43db      	mvns	r3, r3
 80006d8:	697a      	ldr	r2, [r7, #20]
 80006da:	4013      	ands	r3, r2
 80006dc:	617b      	str	r3, [r7, #20]
        /* Write the mode configuration in the corresponding bits */
        tmpreg |= (currentmode << pos);
 80006de:	69fa      	ldr	r2, [r7, #28]
 80006e0:	68fb      	ldr	r3, [r7, #12]
 80006e2:	fa02 f303 	lsl.w	r3, r2, r3
 80006e6:	697a      	ldr	r2, [r7, #20]
 80006e8:	4313      	orrs	r3, r2
 80006ea:	617b      	str	r3, [r7, #20]
        /* Reset the corresponding ODR bit */
        if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
 80006ec:	683b      	ldr	r3, [r7, #0]
 80006ee:	78db      	ldrb	r3, [r3, #3]
 80006f0:	2b28      	cmp	r3, #40	; 0x28
 80006f2:	d105      	bne.n	8000700 <GPIO_Init+0x148>
        {
          GPIOx->BRR = (((uint32_t)0x01) << (pinpos + 0x08));
 80006f4:	69bb      	ldr	r3, [r7, #24]
 80006f6:	3308      	adds	r3, #8
 80006f8:	2201      	movs	r2, #1
 80006fa:	409a      	lsls	r2, r3
 80006fc:	687b      	ldr	r3, [r7, #4]
 80006fe:	615a      	str	r2, [r3, #20]
        }
        /* Set the corresponding ODR bit */
        if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
 8000700:	683b      	ldr	r3, [r7, #0]
 8000702:	78db      	ldrb	r3, [r3, #3]
 8000704:	2b48      	cmp	r3, #72	; 0x48
 8000706:	d105      	bne.n	8000714 <GPIO_Init+0x15c>
        {
          GPIOx->BSRR = (((uint32_t)0x01) << (pinpos + 0x08));
 8000708:	69bb      	ldr	r3, [r7, #24]
 800070a:	3308      	adds	r3, #8
 800070c:	2201      	movs	r2, #1
 800070e:	409a      	lsls	r2, r3
 8000710:	687b      	ldr	r3, [r7, #4]
 8000712:	611a      	str	r2, [r3, #16]
/*---------------------------- GPIO CRH Configuration ------------------------*/
  /* Configure the eight high port pins */
  if (GPIO_InitStruct->GPIO_Pin > 0x00FF)
  {
    tmpreg = GPIOx->CRH;
    for (pinpos = 0x00; pinpos < 0x08; pinpos++)
 8000714:	69bb      	ldr	r3, [r7, #24]
 8000716:	3301      	adds	r3, #1
 8000718:	61bb      	str	r3, [r7, #24]
 800071a:	69bb      	ldr	r3, [r7, #24]
 800071c:	2b07      	cmp	r3, #7
 800071e:	d9c1      	bls.n	80006a4 <GPIO_Init+0xec>
        {
          GPIOx->BSRR = (((uint32_t)0x01) << (pinpos + 0x08));
        }
      }
    }
    GPIOx->CRH = tmpreg;
 8000720:	687b      	ldr	r3, [r7, #4]
 8000722:	697a      	ldr	r2, [r7, #20]
 8000724:	605a      	str	r2, [r3, #4]
  }
}
 8000726:	bf00      	nop
 8000728:	3724      	adds	r7, #36	; 0x24
 800072a:	46bd      	mov	sp, r7
 800072c:	bc80      	pop	{r7}
 800072e:	4770      	bx	lr

08000730 <SPI_Init>:



void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct)
{
 8000730:	b480      	push	{r7}
 8000732:	b085      	sub	sp, #20
 8000734:	af00      	add	r7, sp, #0
 8000736:	6078      	str	r0, [r7, #4]
 8000738:	6039      	str	r1, [r7, #0]
  uint16_t tmpreg = 0;
 800073a:	2300      	movs	r3, #0
 800073c:	81fb      	strh	r3, [r7, #14]
  assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit));
  assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial));

/*---------------------------- SPIx CR1 Configuration ------------------------*/
  /* Get the SPIx CR1 value */
  tmpreg = SPIx->CR1;
 800073e:	687b      	ldr	r3, [r7, #4]
 8000740:	881b      	ldrh	r3, [r3, #0]
 8000742:	81fb      	strh	r3, [r7, #14]
  /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */
  tmpreg &= CR1_CLEAR_Mask;
 8000744:	89fb      	ldrh	r3, [r7, #14]
 8000746:	f403 5341 	and.w	r3, r3, #12352	; 0x3040
 800074a:	81fb      	strh	r3, [r7, #14]
  /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */
  /* Set LSBFirst bit according to SPI_FirstBit value */
  /* Set BR bits according to SPI_BaudRatePrescaler value */
  /* Set CPOL bit according to SPI_CPOL value */
  /* Set CPHA bit according to SPI_CPHA value */
  tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode |
 800074c:	683b      	ldr	r3, [r7, #0]
 800074e:	881a      	ldrh	r2, [r3, #0]
 8000750:	683b      	ldr	r3, [r7, #0]
 8000752:	885b      	ldrh	r3, [r3, #2]
 8000754:	4313      	orrs	r3, r2
 8000756:	b29a      	uxth	r2, r3
                  SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL |  
 8000758:	683b      	ldr	r3, [r7, #0]
 800075a:	889b      	ldrh	r3, [r3, #4]
  /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */
  /* Set LSBFirst bit according to SPI_FirstBit value */
  /* Set BR bits according to SPI_BaudRatePrescaler value */
  /* Set CPOL bit according to SPI_CPOL value */
  /* Set CPHA bit according to SPI_CPHA value */
  tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode |
 800075c:	4313      	orrs	r3, r2
 800075e:	b29a      	uxth	r2, r3
                  SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL |  
 8000760:	683b      	ldr	r3, [r7, #0]
 8000762:	88db      	ldrh	r3, [r3, #6]
  /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */
  /* Set LSBFirst bit according to SPI_FirstBit value */
  /* Set BR bits according to SPI_BaudRatePrescaler value */
  /* Set CPOL bit according to SPI_CPOL value */
  /* Set CPHA bit according to SPI_CPHA value */
  tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode |
 8000764:	4313      	orrs	r3, r2
 8000766:	b29a      	uxth	r2, r3
                  SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL |  
                  SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS |  
 8000768:	683b      	ldr	r3, [r7, #0]
 800076a:	891b      	ldrh	r3, [r3, #8]
  /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */
  /* Set LSBFirst bit according to SPI_FirstBit value */
  /* Set BR bits according to SPI_BaudRatePrescaler value */
  /* Set CPOL bit according to SPI_CPOL value */
  /* Set CPHA bit according to SPI_CPHA value */
  tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode |
 800076c:	4313      	orrs	r3, r2
 800076e:	b29a      	uxth	r2, r3
                  SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL |  
                  SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS |  
 8000770:	683b      	ldr	r3, [r7, #0]
 8000772:	895b      	ldrh	r3, [r3, #10]
  /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */
  /* Set LSBFirst bit according to SPI_FirstBit value */
  /* Set BR bits according to SPI_BaudRatePrescaler value */
  /* Set CPOL bit according to SPI_CPOL value */
  /* Set CPHA bit according to SPI_CPHA value */
  tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode |
 8000774:	4313      	orrs	r3, r2
 8000776:	b29a      	uxth	r2, r3
                  SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL |  
                  SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS |  
                  SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit);
 8000778:	683b      	ldr	r3, [r7, #0]
 800077a:	899b      	ldrh	r3, [r3, #12]
  /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */
  /* Set LSBFirst bit according to SPI_FirstBit value */
  /* Set BR bits according to SPI_BaudRatePrescaler value */
  /* Set CPOL bit according to SPI_CPOL value */
  /* Set CPHA bit according to SPI_CPHA value */
  tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode |
 800077c:	4313      	orrs	r3, r2
 800077e:	b29a      	uxth	r2, r3
                  SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL |  
                  SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS |  
                  SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit);
 8000780:	683b      	ldr	r3, [r7, #0]
 8000782:	89db      	ldrh	r3, [r3, #14]
  /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */
  /* Set LSBFirst bit according to SPI_FirstBit value */
  /* Set BR bits according to SPI_BaudRatePrescaler value */
  /* Set CPOL bit according to SPI_CPOL value */
  /* Set CPHA bit according to SPI_CPHA value */
  tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode |
 8000784:	4313      	orrs	r3, r2
 8000786:	b29a      	uxth	r2, r3
 8000788:	89fb      	ldrh	r3, [r7, #14]
 800078a:	4313      	orrs	r3, r2
 800078c:	81fb      	strh	r3, [r7, #14]
                  SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL |  
                  SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS |  
                  SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit);
  /* Write to SPIx CR1 */
  SPIx->CR1 = tmpreg;
 800078e:	687b      	ldr	r3, [r7, #4]
 8000790:	89fa      	ldrh	r2, [r7, #14]
 8000792:	801a      	strh	r2, [r3, #0]
  
  /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */
  SPIx->I2SCFGR &= SPI_Mode_Select;
 8000794:	687b      	ldr	r3, [r7, #4]
 8000796:	8b9b      	ldrh	r3, [r3, #28]
 8000798:	b29b      	uxth	r3, r3
 800079a:	f423 6300 	bic.w	r3, r3, #2048	; 0x800
 800079e:	b29a      	uxth	r2, r3
 80007a0:	687b      	ldr	r3, [r7, #4]
 80007a2:	839a      	strh	r2, [r3, #28]

/*---------------------------- SPIx CRCPOLY Configuration --------------------*/
  /* Write to SPIx CRCPOLY */
  SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial;
 80007a4:	683b      	ldr	r3, [r7, #0]
 80007a6:	8a1a      	ldrh	r2, [r3, #16]
 80007a8:	687b      	ldr	r3, [r7, #4]
 80007aa:	821a      	strh	r2, [r3, #16]
}
 80007ac:	bf00      	nop
 80007ae:	3714      	adds	r7, #20
 80007b0:	46bd      	mov	sp, r7
 80007b2:	bc80      	pop	{r7}
 80007b4:	4770      	bx	lr
 80007b6:	bf00      	nop

080007b8 <SPI_Cmd>:


void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState)
{
 80007b8:	b480      	push	{r7}
 80007ba:	b083      	sub	sp, #12
 80007bc:	af00      	add	r7, sp, #0
 80007be:	6078      	str	r0, [r7, #4]
 80007c0:	460b      	mov	r3, r1
 80007c2:	70fb      	strb	r3, [r7, #3]
  /* Check the parameters */
  assert_param(IS_SPI_ALL_PERIPH(SPIx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  if (NewState != DISABLE)
 80007c4:	78fb      	ldrb	r3, [r7, #3]
 80007c6:	2b00      	cmp	r3, #0
 80007c8:	d008      	beq.n	80007dc <SPI_Cmd+0x24>
  {
    /* Enable the selected SPI peripheral */
    SPIx->CR1 |= CR1_SPE_Set;
 80007ca:	687b      	ldr	r3, [r7, #4]
 80007cc:	881b      	ldrh	r3, [r3, #0]
 80007ce:	b29b      	uxth	r3, r3
 80007d0:	f043 0340 	orr.w	r3, r3, #64	; 0x40
 80007d4:	b29a      	uxth	r2, r3
 80007d6:	687b      	ldr	r3, [r7, #4]
 80007d8:	801a      	strh	r2, [r3, #0]
  else
  {
    /* Disable the selected SPI peripheral */
    SPIx->CR1 &= CR1_SPE_Reset;
  }
}
 80007da:	e007      	b.n	80007ec <SPI_Cmd+0x34>
    SPIx->CR1 |= CR1_SPE_Set;
  }
  else
  {
    /* Disable the selected SPI peripheral */
    SPIx->CR1 &= CR1_SPE_Reset;
 80007dc:	687b      	ldr	r3, [r7, #4]
 80007de:	881b      	ldrh	r3, [r3, #0]
 80007e0:	b29b      	uxth	r3, r3
 80007e2:	f023 0340 	bic.w	r3, r3, #64	; 0x40
 80007e6:	b29a      	uxth	r2, r3
 80007e8:	687b      	ldr	r3, [r7, #4]
 80007ea:	801a      	strh	r2, [r3, #0]
  }
}
 80007ec:	bf00      	nop
 80007ee:	370c      	adds	r7, #12
 80007f0:	46bd      	mov	sp, r7
 80007f2:	bc80      	pop	{r7}
 80007f4:	4770      	bx	lr
 80007f6:	bf00      	nop

080007f8 <GPIO_SetBits>:


void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
 80007f8:	b480      	push	{r7}
 80007fa:	b083      	sub	sp, #12
 80007fc:	af00      	add	r7, sp, #0
 80007fe:	6078      	str	r0, [r7, #4]
 8000800:	460b      	mov	r3, r1
 8000802:	807b      	strh	r3, [r7, #2]
  /* Check the parameters */
  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
  assert_param(IS_GPIO_PIN(GPIO_Pin));
  
  GPIOx->BSRR = GPIO_Pin;
 8000804:	887a      	ldrh	r2, [r7, #2]
 8000806:	687b      	ldr	r3, [r7, #4]
 8000808:	611a      	str	r2, [r3, #16]
}
 800080a:	bf00      	nop
 800080c:	370c      	adds	r7, #12
 800080e:	46bd      	mov	sp, r7
 8000810:	bc80      	pop	{r7}
 8000812:	4770      	bx	lr

08000814 <RCC_APB2PeriphClockCmd>:



void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
{
 8000814:	b480      	push	{r7}
 8000816:	b083      	sub	sp, #12
 8000818:	af00      	add	r7, sp, #0
 800081a:	6078      	str	r0, [r7, #4]
 800081c:	460b      	mov	r3, r1
 800081e:	70fb      	strb	r3, [r7, #3]
  /* Check the parameters */
  assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph));
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  if (NewState != DISABLE)
 8000820:	78fb      	ldrb	r3, [r7, #3]
 8000822:	2b00      	cmp	r3, #0
 8000824:	d006      	beq.n	8000834 <RCC_APB2PeriphClockCmd+0x20>
  {
    RCC->APB2ENR |= RCC_APB2Periph;
 8000826:	4909      	ldr	r1, [pc, #36]	; (800084c <RCC_APB2PeriphClockCmd+0x38>)
 8000828:	4b08      	ldr	r3, [pc, #32]	; (800084c <RCC_APB2PeriphClockCmd+0x38>)
 800082a:	699a      	ldr	r2, [r3, #24]
 800082c:	687b      	ldr	r3, [r7, #4]
 800082e:	4313      	orrs	r3, r2
 8000830:	618b      	str	r3, [r1, #24]
  }
  else
  {
    RCC->APB2ENR &= ~RCC_APB2Periph;
  }
}
 8000832:	e006      	b.n	8000842 <RCC_APB2PeriphClockCmd+0x2e>
  {
    RCC->APB2ENR |= RCC_APB2Periph;
  }
  else
  {
    RCC->APB2ENR &= ~RCC_APB2Periph;
 8000834:	4905      	ldr	r1, [pc, #20]	; (800084c <RCC_APB2PeriphClockCmd+0x38>)
 8000836:	4b05      	ldr	r3, [pc, #20]	; (800084c <RCC_APB2PeriphClockCmd+0x38>)
 8000838:	699a      	ldr	r2, [r3, #24]
 800083a:	687b      	ldr	r3, [r7, #4]
 800083c:	43db      	mvns	r3, r3
 800083e:	4013      	ands	r3, r2
 8000840:	618b      	str	r3, [r1, #24]
  }
}
 8000842:	bf00      	nop
 8000844:	370c      	adds	r7, #12
 8000846:	46bd      	mov	sp, r7
 8000848:	bc80      	pop	{r7}
 800084a:	4770      	bx	lr
 800084c:	40021000 	.word	0x40021000

08000850 <GPIO_ResetBits>:

void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
 8000850:	b480      	push	{r7}
 8000852:	b083      	sub	sp, #12
 8000854:	af00      	add	r7, sp, #0
 8000856:	6078      	str	r0, [r7, #4]
 8000858:	460b      	mov	r3, r1
 800085a:	807b      	strh	r3, [r7, #2]
  /* Check the parameters */
  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
  assert_param(IS_GPIO_PIN(GPIO_Pin));
  
  GPIOx->BRR = GPIO_Pin;
 800085c:	887a      	ldrh	r2, [r7, #2]
 800085e:	687b      	ldr	r3, [r7, #4]
 8000860:	615a      	str	r2, [r3, #20]
}
 8000862:	bf00      	nop
 8000864:	370c      	adds	r7, #12
 8000866:	46bd      	mov	sp, r7
 8000868:	bc80      	pop	{r7}
 800086a:	4770      	bx	lr

0800086c <ADC_Init>:

void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct)
{
 800086c:	b480      	push	{r7}
 800086e:	b085      	sub	sp, #20
 8000870:	af00      	add	r7, sp, #0
 8000872:	6078      	str	r0, [r7, #4]
 8000874:	6039      	str	r1, [r7, #0]
  uint32_t tmpreg1 = 0;
 8000876:	2300      	movs	r3, #0
 8000878:	60fb      	str	r3, [r7, #12]
  uint8_t tmpreg2 = 0;
 800087a:	2300      	movs	r3, #0
 800087c:	72fb      	strb	r3, [r7, #11]
  assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign));
  assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfChannel));

  /*---------------------------- ADCx CR1 Configuration -----------------*/
  /* Get the ADCx CR1 value */
  tmpreg1 = ADCx->CR1;
 800087e:	687b      	ldr	r3, [r7, #4]
 8000880:	685b      	ldr	r3, [r3, #4]
 8000882:	60fb      	str	r3, [r7, #12]
  /* Clear DUALMOD and SCAN bits */
  tmpreg1 &= CR1_CLEAR_Mask;
 8000884:	68fb      	ldr	r3, [r7, #12]
 8000886:	f403 5341 	and.w	r3, r3, #12352	; 0x3040
 800088a:	60fb      	str	r3, [r7, #12]
  /* Configure ADCx: Dual mode and scan conversion mode */
  /* Set DUALMOD bits according to ADC_Mode value */
  /* Set SCAN bit according to ADC_ScanConvMode value */
  tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_Mode | ((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8));
 800088c:	683b      	ldr	r3, [r7, #0]
 800088e:	681a      	ldr	r2, [r3, #0]
 8000890:	683b      	ldr	r3, [r7, #0]
 8000892:	791b      	ldrb	r3, [r3, #4]
 8000894:	021b      	lsls	r3, r3, #8
 8000896:	4313      	orrs	r3, r2
 8000898:	68fa      	ldr	r2, [r7, #12]
 800089a:	4313      	orrs	r3, r2
 800089c:	60fb      	str	r3, [r7, #12]
  /* Write to ADCx CR1 */
  ADCx->CR1 = tmpreg1;
 800089e:	687b      	ldr	r3, [r7, #4]
 80008a0:	68fa      	ldr	r2, [r7, #12]
 80008a2:	605a      	str	r2, [r3, #4]

  /*---------------------------- ADCx CR2 Configuration -----------------*/
  /* Get the ADCx CR2 value */
  tmpreg1 = ADCx->CR2;
 80008a4:	687b      	ldr	r3, [r7, #4]
 80008a6:	689b      	ldr	r3, [r3, #8]
 80008a8:	60fb      	str	r3, [r7, #12]
  /* Clear CONT, ALIGN and EXTSEL bits */
  tmpreg1 &= CR2_CLEAR_Mask;
 80008aa:	68fa      	ldr	r2, [r7, #12]
 80008ac:	4b16      	ldr	r3, [pc, #88]	; (8000908 <ADC_Init+0x9c>)
 80008ae:	4013      	ands	r3, r2
 80008b0:	60fb      	str	r3, [r7, #12]
  /* Configure ADCx: external trigger event and continuous conversion mode */
  /* Set ALIGN bit according to ADC_DataAlign value */
  /* Set EXTSEL bits according to ADC_ExternalTrigConv value */
  /* Set CONT bit according to ADC_ContinuousConvMode value */
  tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv |
 80008b2:	683b      	ldr	r3, [r7, #0]
 80008b4:	68da      	ldr	r2, [r3, #12]
 80008b6:	683b      	ldr	r3, [r7, #0]
 80008b8:	689b      	ldr	r3, [r3, #8]
 80008ba:	431a      	orrs	r2, r3
            ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1));
 80008bc:	683b      	ldr	r3, [r7, #0]
 80008be:	795b      	ldrb	r3, [r3, #5]
 80008c0:	005b      	lsls	r3, r3, #1
  tmpreg1 &= CR2_CLEAR_Mask;
  /* Configure ADCx: external trigger event and continuous conversion mode */
  /* Set ALIGN bit according to ADC_DataAlign value */
  /* Set EXTSEL bits according to ADC_ExternalTrigConv value */
  /* Set CONT bit according to ADC_ContinuousConvMode value */
  tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv |
 80008c2:	4313      	orrs	r3, r2
 80008c4:	68fa      	ldr	r2, [r7, #12]
 80008c6:	4313      	orrs	r3, r2
 80008c8:	60fb      	str	r3, [r7, #12]
            ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1));
  /* Write to ADCx CR2 */
  ADCx->CR2 = tmpreg1;
 80008ca:	687b      	ldr	r3, [r7, #4]
 80008cc:	68fa      	ldr	r2, [r7, #12]
 80008ce:	609a      	str	r2, [r3, #8]

  /*---------------------------- ADCx SQR1 Configuration -----------------*/
  /* Get the ADCx SQR1 value */
  tmpreg1 = ADCx->SQR1;
 80008d0:	687b      	ldr	r3, [r7, #4]
 80008d2:	6adb      	ldr	r3, [r3, #44]	; 0x2c
 80008d4:	60fb      	str	r3, [r7, #12]
  /* Clear L bits */
  tmpreg1 &= SQR1_CLEAR_Mask;
 80008d6:	68fb      	ldr	r3, [r7, #12]
 80008d8:	f423 0370 	bic.w	r3, r3, #15728640	; 0xf00000
 80008dc:	60fb      	str	r3, [r7, #12]
  /* Configure ADCx: regular channel sequence length */
  /* Set L bits according to ADC_NbrOfChannel value */
  tmpreg2 |= (uint8_t) (ADC_InitStruct->ADC_NbrOfChannel - (uint8_t)1);
 80008de:	683b      	ldr	r3, [r7, #0]
 80008e0:	7c1b      	ldrb	r3, [r3, #16]
 80008e2:	3b01      	subs	r3, #1
 80008e4:	b2da      	uxtb	r2, r3
 80008e6:	7afb      	ldrb	r3, [r7, #11]
 80008e8:	4313      	orrs	r3, r2
 80008ea:	72fb      	strb	r3, [r7, #11]
  tmpreg1 |= (uint32_t)tmpreg2 << 20;
 80008ec:	7afb      	ldrb	r3, [r7, #11]
 80008ee:	051b      	lsls	r3, r3, #20
 80008f0:	68fa      	ldr	r2, [r7, #12]
 80008f2:	4313      	orrs	r3, r2
 80008f4:	60fb      	str	r3, [r7, #12]
  /* Write to ADCx SQR1 */
  ADCx->SQR1 = tmpreg1;
 80008f6:	687b      	ldr	r3, [r7, #4]
 80008f8:	68fa      	ldr	r2, [r7, #12]
 80008fa:	62da      	str	r2, [r3, #44]	; 0x2c
}
 80008fc:	bf00      	nop
 80008fe:	3714      	adds	r7, #20
 8000900:	46bd      	mov	sp, r7
 8000902:	bc80      	pop	{r7}
 8000904:	4770      	bx	lr
 8000906:	bf00      	nop
 8000908:	fff1f7fd 	.word	0xfff1f7fd

0800090c <SD_LowLevel_Init>:



void SD_LowLevel_Init(void)
{
 800090c:	b580      	push	{r7, lr}
 800090e:	b086      	sub	sp, #24
 8000910:	af00      	add	r7, sp, #0
  GPIO_InitTypeDef  GPIO_InitStructure;
  SPI_InitTypeDef   SPI_InitStructure;

  /*!< SD_SPI_CS_GPIO, SD_SPI_MOSI_GPIO, SD_SPI_MISO_GPIO, SD_SPI_DETECT_GPIO 
       and SD_SPI_SCK_GPIO Periph clock enable */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
 8000912:	2101      	movs	r1, #1
 8000914:	2004      	movs	r0, #4
 8000916:	f7ff ff7d 	bl	8000814 <RCC_APB2PeriphClockCmd>

  /*!< SD_SPI Periph clock enable */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE); 
 800091a:	2101      	movs	r1, #1
 800091c:	f44f 5080 	mov.w	r0, #4096	; 0x1000
 8000920:	f7ff ff78 	bl	8000814 <RCC_APB2PeriphClockCmd>

  
  /*!< Configure SD_SPI pins: SCK */
  GPIO_InitStructure.GPIO_Pin = SD_SPI_SCK_PIN |  SD_SPI_MOSI_PIN | SD_SPI_MISO_PIN;
 8000924:	23e0      	movs	r3, #224	; 0xe0
 8000926:	82bb      	strh	r3, [r7, #20]
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
 8000928:	2303      	movs	r3, #3
 800092a:	75bb      	strb	r3, [r7, #22]
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
 800092c:	2318      	movs	r3, #24
 800092e:	75fb      	strb	r3, [r7, #23]
  GPIO_Init(SD_SPI_SCK_GPIO_PORT, &GPIO_InitStructure);
 8000930:	f107 0314 	add.w	r3, r7, #20
 8000934:	4619      	mov	r1, r3
 8000936:	4817      	ldr	r0, [pc, #92]	; (8000994 <SD_LowLevel_Init+0x88>)
 8000938:	f7ff fe3e 	bl	80005b8 <GPIO_Init>

  /*!< Configure SD_SPI_CS_PIN pin: SD Card CS pin */
  GPIO_InitStructure.GPIO_Pin = SD_CS_PIN;
 800093c:	2310      	movs	r3, #16
 800093e:	82bb      	strh	r3, [r7, #20]
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
 8000940:	2310      	movs	r3, #16
 8000942:	75fb      	strb	r3, [r7, #23]
  GPIO_Init(SD_CS_GPIO_PORT, &GPIO_InitStructure);
 8000944:	f107 0314 	add.w	r3, r7, #20
 8000948:	4619      	mov	r1, r3
 800094a:	4812      	ldr	r0, [pc, #72]	; (8000994 <SD_LowLevel_Init+0x88>)
 800094c:	f7ff fe34 	bl	80005b8 <GPIO_Init>

  /*!< SD_SPI Config */
  SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
 8000950:	2300      	movs	r3, #0
 8000952:	803b      	strh	r3, [r7, #0]
  SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
 8000954:	f44f 7382 	mov.w	r3, #260	; 0x104
 8000958:	807b      	strh	r3, [r7, #2]
  SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
 800095a:	2300      	movs	r3, #0
 800095c:	80bb      	strh	r3, [r7, #4]
  SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
 800095e:	2302      	movs	r3, #2
 8000960:	80fb      	strh	r3, [r7, #6]
  SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
 8000962:	2301      	movs	r3, #1
 8000964:	813b      	strh	r3, [r7, #8]
  SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
 8000966:	f44f 7300 	mov.w	r3, #512	; 0x200
 800096a:	817b      	strh	r3, [r7, #10]
  SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4;
 800096c:	2308      	movs	r3, #8
 800096e:	81bb      	strh	r3, [r7, #12]

  SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
 8000970:	2300      	movs	r3, #0
 8000972:	81fb      	strh	r3, [r7, #14]
  SPI_InitStructure.SPI_CRCPolynomial = 7;
 8000974:	2307      	movs	r3, #7
 8000976:	823b      	strh	r3, [r7, #16]
  SPI_Init(SD_SPI, &SPI_InitStructure);
 8000978:	463b      	mov	r3, r7
 800097a:	4619      	mov	r1, r3
 800097c:	4806      	ldr	r0, [pc, #24]	; (8000998 <SD_LowLevel_Init+0x8c>)
 800097e:	f7ff fed7 	bl	8000730 <SPI_Init>
  
  SPI_Cmd(SD_SPI, ENABLE); /*!< SD_SPI enable */
 8000982:	2101      	movs	r1, #1
 8000984:	4804      	ldr	r0, [pc, #16]	; (8000998 <SD_LowLevel_Init+0x8c>)
 8000986:	f7ff ff17 	bl	80007b8 <SPI_Cmd>
}
 800098a:	bf00      	nop
 800098c:	3718      	adds	r7, #24
 800098e:	46bd      	mov	sp, r7
 8000990:	bd80      	pop	{r7, pc}
 8000992:	bf00      	nop
 8000994:	40010800 	.word	0x40010800
 8000998:	40013000 	.word	0x40013000

0800099c <SD_GoIdleState>:



SD_Error SD_GoIdleState(void)
{
 800099c:	b580      	push	{r7, lr}
 800099e:	af00      	add	r7, sp, #0
  /*!< SD chip select low */
  SD_CS_LOW();
 80009a0:	2110      	movs	r1, #16
 80009a2:	4818      	ldr	r0, [pc, #96]	; (8000a04 <SD_GoIdleState+0x68>)
 80009a4:	f7ff ff54 	bl	8000850 <GPIO_ResetBits>
  
  /*!< Send CMD0 (SD_CMD_GO_IDLE_STATE) to put SD in SPI mode */
  SD_SendCmd(SD_CMD_GO_IDLE_STATE, 0, 0x95);
 80009a8:	2295      	movs	r2, #149	; 0x95
 80009aa:	2100      	movs	r1, #0
 80009ac:	2000      	movs	r0, #0
 80009ae:	f000 f82b 	bl	8000a08 <SD_SendCmd>
  
  /*!< Wait for In Idle State Response (R1 Format) equal to 0x01 */
  if (SD_GetResponse(SD_IN_IDLE_STATE))
 80009b2:	2001      	movs	r0, #1
 80009b4:	f000 f85e 	bl	8000a74 <SD_GetResponse>
 80009b8:	4603      	mov	r3, r0
 80009ba:	2b00      	cmp	r3, #0
 80009bc:	d001      	beq.n	80009c2 <SD_GoIdleState+0x26>
  {
    /*!< No Idle State Response: return response failue */
    return SD_RESPONSE_FAILURE;
 80009be:	23ff      	movs	r3, #255	; 0xff
 80009c0:	e01d      	b.n	80009fe <SD_GoIdleState+0x62>
  }
  /*----------Activates the card initialization process-----------*/
  do
  {
    /*!< SD chip select high */
    SD_CS_HIGH();
 80009c2:	2110      	movs	r1, #16
 80009c4:	480f      	ldr	r0, [pc, #60]	; (8000a04 <SD_GoIdleState+0x68>)
 80009c6:	f7ff ff17 	bl	80007f8 <GPIO_SetBits>
    
    /*!< Send Dummy byte 0xFF */
    SD_WriteByte(SD_DUMMY_BYTE);
 80009ca:	20ff      	movs	r0, #255	; 0xff
 80009cc:	f7ff fdce 	bl	800056c <SD_WriteByte>
    
    /*!< SD chip select low */
    SD_CS_LOW();
 80009d0:	2110      	movs	r1, #16
 80009d2:	480c      	ldr	r0, [pc, #48]	; (8000a04 <SD_GoIdleState+0x68>)
 80009d4:	f7ff ff3c 	bl	8000850 <GPIO_ResetBits>
    
    /*!< Send CMD1 (Activates the card process) until response equal to 0x0 */
    SD_SendCmd(SD_CMD_SEND_OP_COND, 0, 0xFF);
 80009d8:	22ff      	movs	r2, #255	; 0xff
 80009da:	2100      	movs	r1, #0
 80009dc:	2001      	movs	r0, #1
 80009de:	f000 f813 	bl	8000a08 <SD_SendCmd>
    /*!< Wait for no error Response (R1 Format) equal to 0x00 */
  }
  while (SD_GetResponse(SD_RESPONSE_NO_ERROR));
 80009e2:	2000      	movs	r0, #0
 80009e4:	f000 f846 	bl	8000a74 <SD_GetResponse>
 80009e8:	4603      	mov	r3, r0
 80009ea:	2b00      	cmp	r3, #0
 80009ec:	d1e9      	bne.n	80009c2 <SD_GoIdleState+0x26>
  
  /*!< SD chip select high */
  SD_CS_HIGH();
 80009ee:	2110      	movs	r1, #16
 80009f0:	4804      	ldr	r0, [pc, #16]	; (8000a04 <SD_GoIdleState+0x68>)
 80009f2:	f7ff ff01 	bl	80007f8 <GPIO_SetBits>
  
  /*!< Send dummy byte 0xFF */
  SD_WriteByte(SD_DUMMY_BYTE);
 80009f6:	20ff      	movs	r0, #255	; 0xff
 80009f8:	f7ff fdb8 	bl	800056c <SD_WriteByte>
  
  return SD_RESPONSE_NO_ERROR;
 80009fc:	2300      	movs	r3, #0
}
 80009fe:	4618      	mov	r0, r3
 8000a00:	bd80      	pop	{r7, pc}
 8000a02:	bf00      	nop
 8000a04:	40010800 	.word	0x40010800

08000a08 <SD_SendCmd>:


void SD_SendCmd(uint8_t Cmd, uint32_t Arg, uint8_t Crc)
{
 8000a08:	b580      	push	{r7, lr}
 8000a0a:	b086      	sub	sp, #24
 8000a0c:	af00      	add	r7, sp, #0
 8000a0e:	4603      	mov	r3, r0
 8000a10:	6039      	str	r1, [r7, #0]
 8000a12:	71fb      	strb	r3, [r7, #7]
 8000a14:	4613      	mov	r3, r2
 8000a16:	71bb      	strb	r3, [r7, #6]
  uint32_t i = 0x00;
 8000a18:	2300      	movs	r3, #0
 8000a1a:	617b      	str	r3, [r7, #20]
  
  uint8_t Frame[6];
  
  Frame[0] = (Cmd | 0x40); /*!< Construct byte 1 */
 8000a1c:	79fb      	ldrb	r3, [r7, #7]
 8000a1e:	f043 0340 	orr.w	r3, r3, #64	; 0x40
 8000a22:	b2db      	uxtb	r3, r3
 8000a24:	733b      	strb	r3, [r7, #12]
  
  Frame[1] = (uint8_t)(Arg >> 24); /*!< Construct byte 2 */
 8000a26:	683b      	ldr	r3, [r7, #0]
 8000a28:	0e1b      	lsrs	r3, r3, #24
 8000a2a:	b2db      	uxtb	r3, r3
 8000a2c:	737b      	strb	r3, [r7, #13]
  
  Frame[2] = (uint8_t)(Arg >> 16); /*!< Construct byte 3 */
 8000a2e:	683b      	ldr	r3, [r7, #0]
 8000a30:	0c1b      	lsrs	r3, r3, #16
 8000a32:	b2db      	uxtb	r3, r3
 8000a34:	73bb      	strb	r3, [r7, #14]
  
  Frame[3] = (uint8_t)(Arg >> 8); /*!< Construct byte 4 */
 8000a36:	683b      	ldr	r3, [r7, #0]
 8000a38:	0a1b      	lsrs	r3, r3, #8
 8000a3a:	b2db      	uxtb	r3, r3
 8000a3c:	73fb      	strb	r3, [r7, #15]
  
  Frame[4] = (uint8_t)(Arg); /*!< Construct byte 5 */
 8000a3e:	683b      	ldr	r3, [r7, #0]
 8000a40:	b2db      	uxtb	r3, r3
 8000a42:	743b      	strb	r3, [r7, #16]
  
  Frame[5] = (Crc); /*!< Construct CRC: byte 6 */
 8000a44:	79bb      	ldrb	r3, [r7, #6]
 8000a46:	747b      	strb	r3, [r7, #17]
  
  for (i = 0; i < 6; i++)
 8000a48:	2300      	movs	r3, #0
 8000a4a:	617b      	str	r3, [r7, #20]
 8000a4c:	e00a      	b.n	8000a64 <SD_SendCmd+0x5c>
  {
    SD_WriteByte(Frame[i]); /*!< Send the Cmd bytes */
 8000a4e:	f107 020c 	add.w	r2, r7, #12
 8000a52:	697b      	ldr	r3, [r7, #20]
 8000a54:	4413      	add	r3, r2
 8000a56:	781b      	ldrb	r3, [r3, #0]
 8000a58:	4618      	mov	r0, r3
 8000a5a:	f7ff fd87 	bl	800056c <SD_WriteByte>
  
  Frame[4] = (uint8_t)(Arg); /*!< Construct byte 5 */
  
  Frame[5] = (Crc); /*!< Construct CRC: byte 6 */
  
  for (i = 0; i < 6; i++)
 8000a5e:	697b      	ldr	r3, [r7, #20]
 8000a60:	3301      	adds	r3, #1
 8000a62:	617b      	str	r3, [r7, #20]
 8000a64:	697b      	ldr	r3, [r7, #20]
 8000a66:	2b05      	cmp	r3, #5
 8000a68:	d9f1      	bls.n	8000a4e <SD_SendCmd+0x46>
  {
    SD_WriteByte(Frame[i]); /*!< Send the Cmd bytes */
  }
}
 8000a6a:	bf00      	nop
 8000a6c:	3718      	adds	r7, #24
 8000a6e:	46bd      	mov	sp, r7
 8000a70:	bd80      	pop	{r7, pc}
 8000a72:	bf00      	nop

08000a74 <SD_GetResponse>:


SD_Error SD_GetResponse(uint8_t Response)
{
 8000a74:	b580      	push	{r7, lr}
 8000a76:	b084      	sub	sp, #16
 8000a78:	af00      	add	r7, sp, #0
 8000a7a:	4603      	mov	r3, r0
 8000a7c:	71fb      	strb	r3, [r7, #7]
  uint32_t Count = 0xFFF;
 8000a7e:	f640 73ff 	movw	r3, #4095	; 0xfff
 8000a82:	60fb      	str	r3, [r7, #12]

  /*!< Check if response is got or a timeout is happen */
  while ((SD_ReadByte() != Response) && Count)
 8000a84:	e002      	b.n	8000a8c <SD_GetResponse+0x18>
  {
    Count--;
 8000a86:	68fb      	ldr	r3, [r7, #12]
 8000a88:	3b01      	subs	r3, #1
 8000a8a:	60fb      	str	r3, [r7, #12]
SD_Error SD_GetResponse(uint8_t Response)
{
  uint32_t Count = 0xFFF;

  /*!< Check if response is got or a timeout is happen */
  while ((SD_ReadByte() != Response) && Count)
 8000a8c:	f000 f812 	bl	8000ab4 <SD_ReadByte>
 8000a90:	4603      	mov	r3, r0
 8000a92:	461a      	mov	r2, r3
 8000a94:	79fb      	ldrb	r3, [r7, #7]
 8000a96:	4293      	cmp	r3, r2
 8000a98:	d002      	beq.n	8000aa0 <SD_GetResponse+0x2c>
 8000a9a:	68fb      	ldr	r3, [r7, #12]
 8000a9c:	2b00      	cmp	r3, #0
 8000a9e:	d1f2      	bne.n	8000a86 <SD_GetResponse+0x12>
  {
    Count--;
  }
  if (Count == 0)
 8000aa0:	68fb      	ldr	r3, [r7, #12]
 8000aa2:	2b00      	cmp	r3, #0
 8000aa4:	d101      	bne.n	8000aaa <SD_GetResponse+0x36>
  {
    /*!< After time out */
    return SD_RESPONSE_FAILURE;
 8000aa6:	23ff      	movs	r3, #255	; 0xff
 8000aa8:	e000      	b.n	8000aac <SD_GetResponse+0x38>
  }
  else
  {
    /*!< Right response got */
    return SD_RESPONSE_NO_ERROR;
 8000aaa:	2300      	movs	r3, #0
  }
}
 8000aac:	4618      	mov	r0, r3
 8000aae:	3710      	adds	r7, #16
 8000ab0:	46bd      	mov	sp, r7
 8000ab2:	bd80      	pop	{r7, pc}

08000ab4 <SD_ReadByte>:

uint8_t SD_ReadByte(void)
{
 8000ab4:	b580      	push	{r7, lr}
 8000ab6:	b082      	sub	sp, #8
 8000ab8:	af00      	add	r7, sp, #0
  uint8_t Data = 0;
 8000aba:	2300      	movs	r3, #0
 8000abc:	71fb      	strb	r3, [r7, #7]
  
  /*!< Wait until the transmit buffer is empty */
  while (SPI_I2S_GetFlagStatus(SD_SPI, SPI_I2S_FLAG_TXE) == RESET)
 8000abe:	bf00      	nop
 8000ac0:	2102      	movs	r1, #2
 8000ac2:	480e      	ldr	r0, [pc, #56]	; (8000afc <SD_ReadByte+0x48>)
 8000ac4:	f7ff fcb0 	bl	8000428 <SPI_I2S_GetFlagStatus>
 8000ac8:	4603      	mov	r3, r0
 8000aca:	2b00      	cmp	r3, #0
 8000acc:	d0f8      	beq.n	8000ac0 <SD_ReadByte+0xc>
  {
  }
  /*!< Send the byte */
  SPI_I2S_SendData(SD_SPI, SD_DUMMY_BYTE);
 8000ace:	21ff      	movs	r1, #255	; 0xff
 8000ad0:	480a      	ldr	r0, [pc, #40]	; (8000afc <SD_ReadByte+0x48>)
 8000ad2:	f7ff fcc5 	bl	8000460 <SPI_I2S_SendData>

  /*!< Wait until a data is received */
  while (SPI_I2S_GetFlagStatus(SD_SPI, SPI_I2S_FLAG_RXNE) == RESET)
 8000ad6:	bf00      	nop
 8000ad8:	2101      	movs	r1, #1
 8000ada:	4808      	ldr	r0, [pc, #32]	; (8000afc <SD_ReadByte+0x48>)
 8000adc:	f7ff fca4 	bl	8000428 <SPI_I2S_GetFlagStatus>
 8000ae0:	4603      	mov	r3, r0
 8000ae2:	2b00      	cmp	r3, #0
 8000ae4:	d0f8      	beq.n	8000ad8 <SD_ReadByte+0x24>
  {
  }
  /*!< Get the received data */
  Data = SPI_I2S_ReceiveData(SD_SPI);
 8000ae6:	4805      	ldr	r0, [pc, #20]	; (8000afc <SD_ReadByte+0x48>)
 8000ae8:	f7ff fd34 	bl	8000554 <SPI_I2S_ReceiveData>
 8000aec:	4603      	mov	r3, r0
 8000aee:	71fb      	strb	r3, [r7, #7]

  /*!< Return the shifted data */
  return Data;
 8000af0:	79fb      	ldrb	r3, [r7, #7]
}
 8000af2:	4618      	mov	r0, r3
 8000af4:	3708      	adds	r7, #8
 8000af6:	46bd      	mov	sp, r7
 8000af8:	bd80      	pop	{r7, pc}
 8000afa:	bf00      	nop
 8000afc:	40013000 	.word	0x40013000

08000b00 <SD_GetDataResponse>:

uint8_t SD_GetDataResponse(void)
{
 8000b00:	b580      	push	{r7, lr}
 8000b02:	b082      	sub	sp, #8
 8000b04:	af00      	add	r7, sp, #0
  uint32_t i = 0;
 8000b06:	2300      	movs	r3, #0
 8000b08:	607b      	str	r3, [r7, #4]
  uint8_t response, rvalue;

  while (i <= 64)
 8000b0a:	e01e      	b.n	8000b4a <SD_GetDataResponse+0x4a>
  {
    /*!< Read resonse */
    response = SD_ReadByte();
 8000b0c:	f7ff ffd2 	bl	8000ab4 <SD_ReadByte>
 8000b10:	4603      	mov	r3, r0
 8000b12:	70fb      	strb	r3, [r7, #3]
    /*!< Mask unused bits */
    response &= 0x1F;
 8000b14:	78fb      	ldrb	r3, [r7, #3]
 8000b16:	f003 031f 	and.w	r3, r3, #31
 8000b1a:	70fb      	strb	r3, [r7, #3]
    switch (response)
 8000b1c:	78fb      	ldrb	r3, [r7, #3]
 8000b1e:	2b0b      	cmp	r3, #11
 8000b20:	d006      	beq.n	8000b30 <SD_GetDataResponse+0x30>
 8000b22:	2b0d      	cmp	r3, #13
 8000b24:	d006      	beq.n	8000b34 <SD_GetDataResponse+0x34>
 8000b26:	2b05      	cmp	r3, #5
 8000b28:	d106      	bne.n	8000b38 <SD_GetDataResponse+0x38>
    {
      case SD_DATA_OK:
      {
        rvalue = SD_DATA_OK;
 8000b2a:	2305      	movs	r3, #5
 8000b2c:	70bb      	strb	r3, [r7, #2]
        break;
 8000b2e:	e006      	b.n	8000b3e <SD_GetDataResponse+0x3e>
      }
      case SD_DATA_CRC_ERROR:
        return SD_DATA_CRC_ERROR;
 8000b30:	230b      	movs	r3, #11
 8000b32:	e016      	b.n	8000b62 <SD_GetDataResponse+0x62>
      case SD_DATA_WRITE_ERROR:
        return SD_DATA_WRITE_ERROR;
 8000b34:	230d      	movs	r3, #13
 8000b36:	e014      	b.n	8000b62 <SD_GetDataResponse+0x62>
      default:
      {
        rvalue = SD_DATA_OTHER_ERROR;
 8000b38:	23ff      	movs	r3, #255	; 0xff
 8000b3a:	70bb      	strb	r3, [r7, #2]
        break;
 8000b3c:	bf00      	nop
      }
    }
    /*!< Exit loop in case of data ok */
    if (rvalue == SD_DATA_OK)
 8000b3e:	78bb      	ldrb	r3, [r7, #2]
 8000b40:	2b05      	cmp	r3, #5
 8000b42:	d006      	beq.n	8000b52 <SD_GetDataResponse+0x52>
      break;
    /*!< Increment loop counter */
    i++;
 8000b44:	687b      	ldr	r3, [r7, #4]
 8000b46:	3301      	adds	r3, #1
 8000b48:	607b      	str	r3, [r7, #4]
uint8_t SD_GetDataResponse(void)
{
  uint32_t i = 0;
  uint8_t response, rvalue;

  while (i <= 64)
 8000b4a:	687b      	ldr	r3, [r7, #4]
 8000b4c:	2b40      	cmp	r3, #64	; 0x40
 8000b4e:	d9dd      	bls.n	8000b0c <SD_GetDataResponse+0xc>
 8000b50:	e000      	b.n	8000b54 <SD_GetDataResponse+0x54>
        break;
      }
    }
    /*!< Exit loop in case of data ok */
    if (rvalue == SD_DATA_OK)
      break;
 8000b52:	bf00      	nop
    /*!< Increment loop counter */
    i++;
  }

  /*!< Wait null data */
  while (SD_ReadByte() == 0);
 8000b54:	bf00      	nop
 8000b56:	f7ff ffad 	bl	8000ab4 <SD_ReadByte>
 8000b5a:	4603      	mov	r3, r0
 8000b5c:	2b00      	cmp	r3, #0
 8000b5e:	d0fa      	beq.n	8000b56 <SD_GetDataResponse+0x56>

  /*!< Return response */
  return response;
 8000b60:	78fb      	ldrb	r3, [r7, #3]
}
 8000b62:	4618      	mov	r0, r3
 8000b64:	3708      	adds	r7, #8
 8000b66:	46bd      	mov	sp, r7
 8000b68:	bd80      	pop	{r7, pc}
 8000b6a:	bf00      	nop

08000b6c <SD_Init>:


SD_Error SD_Init(void)
{
 8000b6c:	b580      	push	{r7, lr}
 8000b6e:	b082      	sub	sp, #8
 8000b70:	af00      	add	r7, sp, #0
  uint32_t i = 0;
 8000b72:	2300      	movs	r3, #0
 8000b74:	607b      	str	r3, [r7, #4]

  /*!< Initialize SD_SPI */
  SD_LowLevel_Init(); 
 8000b76:	f7ff fec9 	bl	800090c <SD_LowLevel_Init>

  /*!< SD chip select high */
  SD_CS_HIGH();
 8000b7a:	2110      	movs	r1, #16
 8000b7c:	480a      	ldr	r0, [pc, #40]	; (8000ba8 <SD_Init+0x3c>)
 8000b7e:	f7ff fe3b 	bl	80007f8 <GPIO_SetBits>

  /*!< Send dummy byte 0xFF, 10 times with CS high */
  /*!< Rise CS and MOSI for 80 clocks cycles */
  for (i = 0; i <= 9; i++)
 8000b82:	2300      	movs	r3, #0
 8000b84:	607b      	str	r3, [r7, #4]
 8000b86:	e005      	b.n	8000b94 <SD_Init+0x28>
  {
    /*!< Send dummy byte 0xFF */
    SD_WriteByte(SD_DUMMY_BYTE);
 8000b88:	20ff      	movs	r0, #255	; 0xff
 8000b8a:	f7ff fcef 	bl	800056c <SD_WriteByte>
  /*!< SD chip select high */
  SD_CS_HIGH();

  /*!< Send dummy byte 0xFF, 10 times with CS high */
  /*!< Rise CS and MOSI for 80 clocks cycles */
  for (i = 0; i <= 9; i++)
 8000b8e:	687b      	ldr	r3, [r7, #4]
 8000b90:	3301      	adds	r3, #1
 8000b92:	607b      	str	r3, [r7, #4]
 8000b94:	687b      	ldr	r3, [r7, #4]
 8000b96:	2b09      	cmp	r3, #9
 8000b98:	d9f6      	bls.n	8000b88 <SD_Init+0x1c>
    /*!< Send dummy byte 0xFF */
    SD_WriteByte(SD_DUMMY_BYTE);
  }
  /*------------Put SD in SPI mode--------------*/
  /*!< SD initialized and set to SPI mode properly */
  return (SD_GoIdleState());
 8000b9a:	f7ff feff 	bl	800099c <SD_GoIdleState>
 8000b9e:	4603      	mov	r3, r0
}
 8000ba0:	4618      	mov	r0, r3
 8000ba2:	3708      	adds	r7, #8
 8000ba4:	46bd      	mov	sp, r7
 8000ba6:	bd80      	pop	{r7, pc}
 8000ba8:	40010800 	.word	0x40010800

08000bac <_checkSDStatus>:




uint8_t _checkSDStatus() {
 8000bac:	b580      	push	{r7, lr}
 8000bae:	af00      	add	r7, sp, #0
if (SD_Status == SD_RESPONSE_NO_ERROR)
 8000bb0:	4b09      	ldr	r3, [pc, #36]	; (8000bd8 <_checkSDStatus+0x2c>)
 8000bb2:	881b      	ldrh	r3, [r3, #0]
 8000bb4:	2b00      	cmp	r3, #0
 8000bb6:	d101      	bne.n	8000bbc <_checkSDStatus+0x10>
return 0;
 8000bb8:	2300      	movs	r3, #0
 8000bba:	e00a      	b.n	8000bd2 <_checkSDStatus+0x26>

do
SD_Status = SD_Init();
 8000bbc:	f7ff ffd6 	bl	8000b6c <SD_Init>
 8000bc0:	4603      	mov	r3, r0
 8000bc2:	b29a      	uxth	r2, r3
 8000bc4:	4b04      	ldr	r3, [pc, #16]	; (8000bd8 <_checkSDStatus+0x2c>)
 8000bc6:	801a      	strh	r2, [r3, #0]
while (SD_Status != SD_RESPONSE_NO_ERROR);
 8000bc8:	4b03      	ldr	r3, [pc, #12]	; (8000bd8 <_checkSDStatus+0x2c>)
 8000bca:	881b      	ldrh	r3, [r3, #0]
 8000bcc:	2b00      	cmp	r3, #0
 8000bce:	d1f5      	bne.n	8000bbc <_checkSDStatus+0x10>

return 1;
 8000bd0:	2301      	movs	r3, #1
}
 8000bd2:	4618      	mov	r0, r3
 8000bd4:	bd80      	pop	{r7, pc}
 8000bd6:	bf00      	nop
 8000bd8:	20000018 	.word	0x20000018

08000bdc <checkSDStatus>:

void checkSDStatus() {
 8000bdc:	b580      	push	{r7, lr}
 8000bde:	af00      	add	r7, sp, #0
while (_checkSDStatus()) { 
 8000be0:	bf00      	nop
 8000be2:	f7ff ffe3 	bl	8000bac <_checkSDStatus>
 8000be6:	4603      	mov	r3, r0
 8000be8:	2b00      	cmp	r3, #0
 8000bea:	d1fa      	bne.n	8000be2 <checkSDStatus+0x6>
//<----><------>writeBufFilled = 0;
//<----><------>SDWriteOffset  = SD_WriteHeaders();
}
}
 8000bec:	bf00      	nop
 8000bee:	bd80      	pop	{r7, pc}

08000bf0 <ADC_GetConversionValue>:


uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx)
{
 8000bf0:	b480      	push	{r7}
 8000bf2:	b083      	sub	sp, #12
 8000bf4:	af00      	add	r7, sp, #0
 8000bf6:	6078      	str	r0, [r7, #4]
  /* Check the parameters */
  assert_param(IS_ADC_ALL_PERIPH(ADCx));
  /* Return the selected ADC conversion value */
  return (uint16_t) ADCx->DR;
 8000bf8:	687b      	ldr	r3, [r7, #4]
 8000bfa:	6cdb      	ldr	r3, [r3, #76]	; 0x4c
 8000bfc:	b29b      	uxth	r3, r3
}
 8000bfe:	4618      	mov	r0, r3
 8000c00:	370c      	adds	r7, #12
 8000c02:	46bd      	mov	sp, r7
 8000c04:	bc80      	pop	{r7}
 8000c06:	4770      	bx	lr

08000c08 <SD_WriteBlock_1>:


SD_Error SD_WriteBlock_1(uint32_t WriteAddr)
{
 8000c08:	b580      	push	{r7, lr}
 8000c0a:	b084      	sub	sp, #16
 8000c0c:	af00      	add	r7, sp, #0
 8000c0e:	6078      	str	r0, [r7, #4]
  Wstatus = BuffReady;
 8000c10:	4b3b      	ldr	r3, [pc, #236]	; (8000d00 <SD_WriteBlock_1+0xf8>)
 8000c12:	781a      	ldrb	r2, [r3, #0]
 8000c14:	4b3b      	ldr	r3, [pc, #236]	; (8000d04 <SD_WriteBlock_1+0xfc>)
 8000c16:	701a      	strb	r2, [r3, #0]
  BuffReady = 0;
 8000c18:	4b39      	ldr	r3, [pc, #228]	; (8000d00 <SD_WriteBlock_1+0xf8>)
 8000c1a:	2200      	movs	r2, #0
 8000c1c:	701a      	strb	r2, [r3, #0]
  uint32_t i = 0;
 8000c1e:	2300      	movs	r3, #0
 8000c20:	60fb      	str	r3, [r7, #12]
  SD_Error rvalue = SD_RESPONSE_FAILURE;
 8000c22:	23ff      	movs	r3, #255	; 0xff
 8000c24:	72fb      	strb	r3, [r7, #11]
  SD_CS_LOW();
 8000c26:	2110      	movs	r1, #16
 8000c28:	4837      	ldr	r0, [pc, #220]	; (8000d08 <SD_WriteBlock_1+0x100>)
 8000c2a:	f7ff fe11 	bl	8000850 <GPIO_ResetBits>
  SD_SendCmd(SD_CMD_WRITE_SINGLE_BLOCK, WriteAddr, 0xFF);
 8000c2e:	22ff      	movs	r2, #255	; 0xff
 8000c30:	6879      	ldr	r1, [r7, #4]
 8000c32:	2018      	movs	r0, #24
 8000c34:	f7ff fee8 	bl	8000a08 <SD_SendCmd>
  if (!SD_GetResponse(SD_RESPONSE_NO_ERROR))
 8000c38:	2000      	movs	r0, #0
 8000c3a:	f7ff ff1b 	bl	8000a74 <SD_GetResponse>
 8000c3e:	4603      	mov	r3, r0
 8000c40:	2b00      	cmp	r3, #0
 8000c42:	d14e      	bne.n	8000ce2 <SD_WriteBlock_1+0xda>
  {
    SD_WriteByte(SD_DUMMY_BYTE);
 8000c44:	20ff      	movs	r0, #255	; 0xff
 8000c46:	f7ff fc91 	bl	800056c <SD_WriteByte>
    SD_WriteByte(0xFE);
 8000c4a:	20fe      	movs	r0, #254	; 0xfe
 8000c4c:	f7ff fc8e 	bl	800056c <SD_WriteByte>
	if (Wstatus == 1){
 8000c50:	4b2c      	ldr	r3, [pc, #176]	; (8000d04 <SD_WriteBlock_1+0xfc>)
 8000c52:	781b      	ldrb	r3, [r3, #0]
 8000c54:	2b01      	cmp	r3, #1
 8000c56:	d11a      	bne.n	8000c8e <SD_WriteBlock_1+0x86>
    for (i = 0; i < SD_BUFSIZE/2; i += 1)
 8000c58:	2300      	movs	r3, #0
 8000c5a:	60fb      	str	r3, [r7, #12]
 8000c5c:	e014      	b.n	8000c88 <SD_WriteBlock_1+0x80>
    {
    SD_WriteByte(Buffer1[i]);
 8000c5e:	4a2b      	ldr	r2, [pc, #172]	; (8000d0c <SD_WriteBlock_1+0x104>)
 8000c60:	68fb      	ldr	r3, [r7, #12]
 8000c62:	f832 3013 	ldrh.w	r3, [r2, r3, lsl #1]
 8000c66:	b2db      	uxtb	r3, r3
 8000c68:	4618      	mov	r0, r3
 8000c6a:	f7ff fc7f 	bl	800056c <SD_WriteByte>
    SD_WriteByte(Buffer1[i] >> 8);
 8000c6e:	4a27      	ldr	r2, [pc, #156]	; (8000d0c <SD_WriteBlock_1+0x104>)
 8000c70:	68fb      	ldr	r3, [r7, #12]
 8000c72:	f832 3013 	ldrh.w	r3, [r2, r3, lsl #1]
 8000c76:	0a1b      	lsrs	r3, r3, #8
 8000c78:	b29b      	uxth	r3, r3
 8000c7a:	b2db      	uxtb	r3, r3
 8000c7c:	4618      	mov	r0, r3
 8000c7e:	f7ff fc75 	bl	800056c <SD_WriteByte>
  if (!SD_GetResponse(SD_RESPONSE_NO_ERROR))
  {
    SD_WriteByte(SD_DUMMY_BYTE);
    SD_WriteByte(0xFE);
	if (Wstatus == 1){
    for (i = 0; i < SD_BUFSIZE/2; i += 1)
 8000c82:	68fb      	ldr	r3, [r7, #12]
 8000c84:	3301      	adds	r3, #1
 8000c86:	60fb      	str	r3, [r7, #12]
 8000c88:	68fb      	ldr	r3, [r7, #12]
 8000c8a:	2bff      	cmp	r3, #255	; 0xff
 8000c8c:	d9e7      	bls.n	8000c5e <SD_WriteBlock_1+0x56>
    SD_WriteByte(Buffer1[i]);
    SD_WriteByte(Buffer1[i] >> 8);
    }
    }
    
    if (Wstatus == 2){
 8000c8e:	4b1d      	ldr	r3, [pc, #116]	; (8000d04 <SD_WriteBlock_1+0xfc>)
 8000c90:	781b      	ldrb	r3, [r3, #0]
 8000c92:	2b02      	cmp	r3, #2
 8000c94:	d11a      	bne.n	8000ccc <SD_WriteBlock_1+0xc4>
    for (i = 0; i < SD_BUFSIZE/2; i += 1)
 8000c96:	2300      	movs	r3, #0
 8000c98:	60fb      	str	r3, [r7, #12]
 8000c9a:	e014      	b.n	8000cc6 <SD_WriteBlock_1+0xbe>
    {
    SD_WriteByte(Buffer2[i]);
 8000c9c:	4a1c      	ldr	r2, [pc, #112]	; (8000d10 <SD_WriteBlock_1+0x108>)
 8000c9e:	68fb      	ldr	r3, [r7, #12]
 8000ca0:	f832 3013 	ldrh.w	r3, [r2, r3, lsl #1]
 8000ca4:	b2db      	uxtb	r3, r3
 8000ca6:	4618      	mov	r0, r3
 8000ca8:	f7ff fc60 	bl	800056c <SD_WriteByte>
    SD_WriteByte(Buffer2[i] >> 8);
 8000cac:	4a18      	ldr	r2, [pc, #96]	; (8000d10 <SD_WriteBlock_1+0x108>)
 8000cae:	68fb      	ldr	r3, [r7, #12]
 8000cb0:	f832 3013 	ldrh.w	r3, [r2, r3, lsl #1]
 8000cb4:	0a1b      	lsrs	r3, r3, #8
 8000cb6:	b29b      	uxth	r3, r3
 8000cb8:	b2db      	uxtb	r3, r3
 8000cba:	4618      	mov	r0, r3
 8000cbc:	f7ff fc56 	bl	800056c <SD_WriteByte>
    SD_WriteByte(Buffer1[i] >> 8);
    }
    }
    
    if (Wstatus == 2){
    for (i = 0; i < SD_BUFSIZE/2; i += 1)
 8000cc0:	68fb      	ldr	r3, [r7, #12]
 8000cc2:	3301      	adds	r3, #1
 8000cc4:	60fb      	str	r3, [r7, #12]
 8000cc6:	68fb      	ldr	r3, [r7, #12]
 8000cc8:	2bff      	cmp	r3, #255	; 0xff
 8000cca:	d9e7      	bls.n	8000c9c <SD_WriteBlock_1+0x94>
    SD_WriteByte(Buffer2[i]);
    SD_WriteByte(Buffer2[i] >> 8);
    }
    }
    
    SD_ReadByte();
 8000ccc:	f7ff fef2 	bl	8000ab4 <SD_ReadByte>
    SD_ReadByte();
 8000cd0:	f7ff fef0 	bl	8000ab4 <SD_ReadByte>
    if (SD_GetDataResponse() == SD_DATA_OK)
 8000cd4:	f7ff ff14 	bl	8000b00 <SD_GetDataResponse>
 8000cd8:	4603      	mov	r3, r0
 8000cda:	2b05      	cmp	r3, #5
 8000cdc:	d101      	bne.n	8000ce2 <SD_WriteBlock_1+0xda>
    {
      rvalue = SD_RESPONSE_NO_ERROR;
 8000cde:	2300      	movs	r3, #0
 8000ce0:	72fb      	strb	r3, [r7, #11]
    }
  }
  SD_CS_HIGH();
 8000ce2:	2110      	movs	r1, #16
 8000ce4:	4808      	ldr	r0, [pc, #32]	; (8000d08 <SD_WriteBlock_1+0x100>)
 8000ce6:	f7ff fd87 	bl	80007f8 <GPIO_SetBits>
  SD_WriteByte(SD_DUMMY_BYTE);
 8000cea:	20ff      	movs	r0, #255	; 0xff
 8000cec:	f7ff fc3e 	bl	800056c <SD_WriteByte>
    Wstatus = 0;
 8000cf0:	4b04      	ldr	r3, [pc, #16]	; (8000d04 <SD_WriteBlock_1+0xfc>)
 8000cf2:	2200      	movs	r2, #0
 8000cf4:	701a      	strb	r2, [r3, #0]
  return rvalue;
 8000cf6:	7afb      	ldrb	r3, [r7, #11]
}
 8000cf8:	4618      	mov	r0, r3
 8000cfa:	3710      	adds	r7, #16
 8000cfc:	46bd      	mov	sp, r7
 8000cfe:	bd80      	pop	{r7, pc}
 8000d00:	20000630 	.word	0x20000630
 8000d04:	2000001b 	.word	0x2000001b
 8000d08:	40010800 	.word	0x40010800
 8000d0c:	20000230 	.word	0x20000230
 8000d10:	20000430 	.word	0x20000430

08000d14 <ADC_Start>:

void ADC_Start (void){
 8000d14:	b580      	push	{r7, lr}
 8000d16:	b086      	sub	sp, #24
 8000d18:	af00      	add	r7, sp, #0

    ADC_InitTypeDef     ADC_InitStructure;
    GPIO_InitTypeDef    GPIO_InitStructure;
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);
 8000d1a:	2101      	movs	r1, #1
 8000d1c:	f44f 7000 	mov.w	r0, #512	; 0x200
 8000d20:	f7ff fd78 	bl	8000814 <RCC_APB2PeriphClockCmd>
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 ;
 8000d24:	2301      	movs	r3, #1
 8000d26:	803b      	strh	r3, [r7, #0]
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
 8000d28:	2300      	movs	r3, #0
 8000d2a:	70fb      	strb	r3, [r7, #3]
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz ;
 8000d2c:	2302      	movs	r3, #2
 8000d2e:	70bb      	strb	r3, [r7, #2]
    GPIO_Init(GPIOA, &GPIO_InitStructure);
 8000d30:	463b      	mov	r3, r7
 8000d32:	4619      	mov	r1, r3
 8000d34:	481a      	ldr	r0, [pc, #104]	; (8000da0 <ADC_Start+0x8c>)
 8000d36:	f7ff fc3f 	bl	80005b8 <GPIO_Init>
    ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
 8000d3a:	2300      	movs	r3, #0
 8000d3c:	607b      	str	r3, [r7, #4]
    ADC_InitStructure.ADC_ScanConvMode = ENABLE;
 8000d3e:	2301      	movs	r3, #1
 8000d40:	723b      	strb	r3, [r7, #8]
    ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
 8000d42:	2301      	movs	r3, #1
 8000d44:	727b      	strb	r3, [r7, #9]
    ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
 8000d46:	f44f 2360 	mov.w	r3, #917504	; 0xe0000
 8000d4a:	60fb      	str	r3, [r7, #12]
    ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
 8000d4c:	2300      	movs	r3, #0
 8000d4e:	613b      	str	r3, [r7, #16]
    ADC_InitStructure.ADC_NbrOfChannel = 0;
 8000d50:	2300      	movs	r3, #0
 8000d52:	753b      	strb	r3, [r7, #20]
    ADC_Init(ADC1, &ADC_InitStructure);
 8000d54:	1d3b      	adds	r3, r7, #4
 8000d56:	4619      	mov	r1, r3
 8000d58:	4812      	ldr	r0, [pc, #72]	; (8000da4 <ADC_Start+0x90>)
 8000d5a:	f7ff fd87 	bl	800086c <ADC_Init>
    ADC_Cmd(ADC1, ENABLE);
 8000d5e:	2101      	movs	r1, #1
 8000d60:	4810      	ldr	r0, [pc, #64]	; (8000da4 <ADC_Start+0x90>)
 8000d62:	f7ff fb45 	bl	80003f0 <ADC_Cmd>
    ADC_ResetCalibration(ADC1);
 8000d66:	480f      	ldr	r0, [pc, #60]	; (8000da4 <ADC_Start+0x90>)
 8000d68:	f7ff fb88 	bl	800047c <ADC_ResetCalibration>
    while(ADC_GetResetCalibrationStatus(ADC1));
 8000d6c:	bf00      	nop
 8000d6e:	480d      	ldr	r0, [pc, #52]	; (8000da4 <ADC_Start+0x90>)
 8000d70:	f7ff fb94 	bl	800049c <ADC_GetResetCalibrationStatus>
 8000d74:	4603      	mov	r3, r0
 8000d76:	2b00      	cmp	r3, #0
 8000d78:	d1f9      	bne.n	8000d6e <ADC_Start+0x5a>
    ADC_StartCalibration(ADC1);
 8000d7a:	480a      	ldr	r0, [pc, #40]	; (8000da4 <ADC_Start+0x90>)
 8000d7c:	f7ff fba6 	bl	80004cc <ADC_StartCalibration>
    while(ADC_GetCalibrationStatus(ADC1));
 8000d80:	bf00      	nop
 8000d82:	4808      	ldr	r0, [pc, #32]	; (8000da4 <ADC_Start+0x90>)
 8000d84:	f7ff fbb2 	bl	80004ec <ADC_GetCalibrationStatus>
 8000d88:	4603      	mov	r3, r0
 8000d8a:	2b00      	cmp	r3, #0
 8000d8c:	d1f9      	bne.n	8000d82 <ADC_Start+0x6e>
    ADC_SoftwareStartConvCmd(ADC1, ENABLE);
 8000d8e:	2101      	movs	r1, #1
 8000d90:	4804      	ldr	r0, [pc, #16]	; (8000da4 <ADC_Start+0x90>)
 8000d92:	f7ff fbc3 	bl	800051c <ADC_SoftwareStartConvCmd>

}
 8000d96:	bf00      	nop
 8000d98:	3718      	adds	r7, #24
 8000d9a:	46bd      	mov	sp, r7
 8000d9c:	bd80      	pop	{r7, pc}
 8000d9e:	bf00      	nop
 8000da0:	40010800 	.word	0x40010800
 8000da4:	40012400 	.word	0x40012400

08000da8 <main>:

int main(void) {
 8000da8:	b580      	push	{r7, lr}
 8000daa:	af00      	add	r7, sp, #0
//    status = SD_Init();
//    checkSDStatus();
//    writeBufFilled = 0;
////    SD_WriteHeaders();
//    SDWriteOffset  = SD_BUFSIZE;
    SystemCoreClockUpdate();
 8000dac:	f7ff fa2e 	bl	800020c <SystemCoreClockUpdate>
    SysTick_Config(SystemCoreClock/10);
 8000db0:	4b05      	ldr	r3, [pc, #20]	; (8000dc8 <main+0x20>)
 8000db2:	681b      	ldr	r3, [r3, #0]
 8000db4:	4a05      	ldr	r2, [pc, #20]	; (8000dcc <main+0x24>)
 8000db6:	fba2 2303 	umull	r2, r3, r2, r3
 8000dba:	08db      	lsrs	r3, r3, #3
 8000dbc:	4618      	mov	r0, r3
 8000dbe:	f7ff f9cf 	bl	8000160 <SysTick_Config>
    ADC_Start();
 8000dc2:	f7ff ffa7 	bl	8000d14 <ADC_Start>
//	SDWriteOffset  = SDWriteOffset + SD_BUFSIZE;

//	}


    }
 8000dc6:	e7fe      	b.n	8000dc6 <main+0x1e>
 8000dc8:	20000000 	.word	0x20000000
 8000dcc:	cccccccd 	.word	0xcccccccd

08000dd0 <SysTick_Handler>:
}

void SysTick_Handler(void) {
 8000dd0:	b580      	push	{r7, lr}
 8000dd2:	af00      	add	r7, sp, #0

ADC1ConvertedValue = ADC_GetConversionValue(ADC1);
 8000dd4:	4804      	ldr	r0, [pc, #16]	; (8000de8 <SysTick_Handler+0x18>)
 8000dd6:	f7ff ff0b 	bl	8000bf0 <ADC_GetConversionValue>
 8000dda:	4603      	mov	r3, r0
 8000ddc:	461a      	mov	r2, r3
 8000dde:	4b03      	ldr	r3, [pc, #12]	; (8000dec <SysTick_Handler+0x1c>)
 8000de0:	801a      	strh	r2, [r3, #0]
	BuffReady = 2;
	BuffCount = 0;
}

*/
}
 8000de2:	bf00      	nop
 8000de4:	bd80      	pop	{r7, pc}
 8000de6:	bf00      	nop
 8000de8:	40012400 	.word	0x40012400
 8000dec:	2000022c 	.word	0x2000022c
 8000df0:	08000e4c 	.word	0x08000e4c
 8000df4:	20000000 	.word	0x20000000
 8000df8:	2000001c 	.word	0x2000001c
 8000dfc:	2000001c 	.word	0x2000001c
 8000e00:	20000638 	.word	0x20000638

08000e04 <Reset_Handler>:
	.weak	Reset_Handler
	.type	Reset_Handler, %function
Reset_Handler:	

/* Copy the data segment initializers from flash to SRAM */  
  movs	r1, #0
 8000e04:	2100      	movs	r1, #0
  b	LoopCopyDataInit
 8000e06:	e003      	b.n	8000e10 <LoopCopyDataInit>

08000e08 <CopyDataInit>:

CopyDataInit:
	ldr	r3, =_sidata
 8000e08:	4b0a      	ldr	r3, [pc, #40]	; (8000e34 <LoopFillZerobss+0x10>)
	ldr	r3, [r3, r1]
 8000e0a:	585b      	ldr	r3, [r3, r1]
	str	r3, [r0, r1]
 8000e0c:	5043      	str	r3, [r0, r1]
	adds	r1, r1, #4
 8000e0e:	3104      	adds	r1, #4

08000e10 <LoopCopyDataInit>:
    
LoopCopyDataInit:
	ldr	r0, =_sdata
 8000e10:	4809      	ldr	r0, [pc, #36]	; (8000e38 <LoopFillZerobss+0x14>)
	ldr	r3, =_edata
 8000e12:	4b0a      	ldr	r3, [pc, #40]	; (8000e3c <LoopFillZerobss+0x18>)
	adds	r2, r0, r1
 8000e14:	1842      	adds	r2, r0, r1
	cmp	r2, r3
 8000e16:	429a      	cmp	r2, r3
	bcc	CopyDataInit
 8000e18:	d3f6      	bcc.n	8000e08 <CopyDataInit>
	ldr	r2, =_sbss
 8000e1a:	4a09      	ldr	r2, [pc, #36]	; (8000e40 <LoopFillZerobss+0x1c>)
	b	LoopFillZerobss
 8000e1c:	e002      	b.n	8000e24 <LoopFillZerobss>

08000e1e <FillZerobss>:
/* Zero fill the bss segment. */  
FillZerobss:
	movs	r3, #0
 8000e1e:	2300      	movs	r3, #0
	str	r3, [r2], #4
 8000e20:	f842 3b04 	str.w	r3, [r2], #4

08000e24 <LoopFillZerobss>:
    
LoopFillZerobss:
	ldr	r3, = _ebss
 8000e24:	4b07      	ldr	r3, [pc, #28]	; (8000e44 <LoopFillZerobss+0x20>)
	cmp	r2, r3
 8000e26:	429a      	cmp	r2, r3
	bcc	FillZerobss
 8000e28:	d3f9      	bcc.n	8000e1e <FillZerobss>
/* Call the clock system intitialization function.*/
  bl  SystemInit  
 8000e2a:	f7ff f9bb 	bl	80001a4 <SystemInit>
/* Call the application's entry point.*/
	bl	main
 8000e2e:	f7ff ffbb 	bl	8000da8 <main>
	bx	lr    
 8000e32:	4770      	bx	lr
/* Copy the data segment initializers from flash to SRAM */  
  movs	r1, #0
  b	LoopCopyDataInit

CopyDataInit:
	ldr	r3, =_sidata
 8000e34:	08000e4c 	.word	0x08000e4c
	ldr	r3, [r3, r1]
	str	r3, [r0, r1]
	adds	r1, r1, #4
    
LoopCopyDataInit:
	ldr	r0, =_sdata
 8000e38:	20000000 	.word	0x20000000
	ldr	r3, =_edata
 8000e3c:	2000001c 	.word	0x2000001c
	adds	r2, r0, r1
	cmp	r2, r3
	bcc	CopyDataInit
	ldr	r2, =_sbss
 8000e40:	2000001c 	.word	0x2000001c
FillZerobss:
	movs	r3, #0
	str	r3, [r2], #4
    
LoopFillZerobss:
	ldr	r3, = _ebss
 8000e44:	20000638 	.word	0x20000638

08000e48 <ADC1_2_IRQHandler>:
 * @retval None       
*/
    .section	.text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
	b	Infinite_Loop
 8000e48:	e7fe      	b.n	8000e48 <ADC1_2_IRQHandler>
	...